Leaderboard

Okay, all it needed was a longer magnet with a DIY self-straightening WD-40 spray can rod. It was at the very far end of the cylinder 😱😅

Just installed a Red Crown Gasoline light in our carport to go with the truck. I am pretty happy with the results.

Got the wagon done and have been putting some miles on it. The wagon is a fun old ride and gets more attention than my 50.

My Great Grandfather, and guessing my Great Grandmother with the '55 Dodge (I'll be inheriting this summer) and what I believe is a '55 DeSoto. The truck was my Great Grandfather's then my Uncle's, and then my Parent's, and soon to be mine. My Dad just told me that he is getting too old to work on too many toys, and he is giving it to me. It is in a little worse shape than here, but pretty much original. I'll post pictures of it's current state, in the correct area, when I get it out of the barn, but from what I recall it definitely will need a gas tank and fuel pump, amongst other things.

Forum started in 1998 on some open source forum software. Was pretty buggy and required a lot of time to keep it working. Basically as the number of posts grew the index would get corrupted and have to start over. Remember the forum updates when we started anew?? Then went to a commercial product, I think it was vbulletin. I think they got bought and then support got pricey. Started looking for another solution and ended up going with Invision, partially because they had tools to migrate from the previous vendor. Migration was a pain, but got it done. Invision has maintained a fair price structure and is good about bug fixes and security updates. Support has also been good. They are reducing some of their features like the store for physical item sales, which is going away very soon. They don't think they can compete in that market with all the other marketplace solutions available. Same was true of the chat function. FYI additional security with the ISP has been implemented and guest access is again available.

Couple shots from the day

Pre BBQ and Merle has already been seen working on someone else’s truck Lol, and we have collectively solved the “ b-series” horn button removal scenario Ggdad1951 (with beer) John T53 (flannel left hand try) Merle (left of 48 dodger holding down the steering wheel)

Also had them flip the flywheel starter ring.

Been awhile since I've been in an engine but I would recommend that once you remove the lower cap place some kind of sleeve over the threads of the cap bolts , rubber/vinyl hose, masking tape, etc. this will avoid worries of bolt threads scraping the crank shaft as you push the piston up per Sniper's recommendation. Just a thought.

A legendary attribute of early Rolls-Royce Motorcars was the ability to balance a coin on the radiator whilst the engine was purring quietly. While there is neither a R-R or 5-shilling coin in this video, here is friend Jerry's 1950 Plymouth with a Canadian Loonie riding the fresh air vent, radiator and cylinder head!

It's amazing what Rustoleum paint can look like when sprayed with hardener and urethane clear to give the UV protection

I've used Rustoleum and Tractor Supply's implement paint for rust "proofing" on many projects over the years. No paint will kill rust that isn't addressed but it can inhibit surface corrosion on clean surfaces. Two VW Beetle floor pans (inside and out) and running gear received the Rustoleum satin and gloss finishes and both have held up well for over twenty years. I usually use a brush because the paint can be applied thicker and the cost and mess is much less than spray cans. I've also bought quarts, thinned with mineral spirits and shot it with a spray gun when that was the best option.

I have an admittedly tight focus on the KT Keller cars, so that's what I research and play with. It's all about having fun after all and those are the ones I like. I am a huge fan of Overdrive transmissions because they don't really change the charm of the cars and actually add to it. When you put one in your car your speedo will be off at all speeds because the speedometer pinion gear was selected for a 4.1 ring and pinion. The good news is you can swap out the pinion from your old three speed to the O.D. and all will be back to normal ( assuming your speedometer doesn't need service ). But what if you changed the rear end ratio or the tire size? I don't advocate changing rear axles because I don't see much to be gained there. You can easily change the differential carrier ( aka 3rd member ) in a Plymouth if you want another ratio. Where I live there's lots of open road with highway speeds of 55 to 70 so optional ratios, tires and O.D. go well with my Plymouth. My P17 Coupe came with 6.40-15 tires ( modern equivalent 195/75/15 ) and a 3.73 final drive ratio so the speedometer pinion would be a 17 tooth gear ( p/n 652-848 ) for an example. Chrysler designed the pinions to use the same 6 tooth gear on the output shaft so you only need to change one gear to correct the speedometer. One thing you find out right away is selecting speedo gears is not an exact science. You can get close and you might hit it right on the button but you more likely will be over or under by 2 or 3 mph. That's why the Highway Patrol has an enforcement tolerance. So let's look at tires first 6.40 15 = 195/75/15 standard tire for a P17 6.70 15 = 205/75/15 standard tire for a P18 7.60 15 = 225/75/15 an optional size tire Final drive ratios 3.90 very common on long wheelbase cars 3.73 standard ratio on many optional on all 3.54 optional Chart of ratios & tires vs speedometer pinions 3.90 6.70 15 17 tooth pinion 3.73 6.40 15 17 tooth pinion 3.73 6.70 15 16 tooth pinion 3.54 6.70 15 16 tooth pinion All 7.60 15 16 tooth pinion So you can see you're not going to get an exact reading but you can get close enough to avoid a ticket. The part number for the 16 tooth pinion is 652-846. I have found that if you have the number for an obscure part the parts house will look to find it in their inventory but they are likely to blow you off if you just say "I need a 16 tooth speedometer gear." Happy hunting!

Yup, between 65 and 70. When I had earplugs in, I tended to go faster, haha....

Thanks sniper and DJK for digging up info. And here's my two cents about electric pumps. First off, I love 'em! And here's why: When one of my vehicles has been sitting for a long time, I don't have to waste precious battery capacity cranking the motor to get fuel up to and in the carb. I also put a electric switch in the supply line to the pump so that, in Autumn when I'm putting cars to sleep, I can turn off the switch and keep running the motor until it dies. This does a good job of draining the carb, reducing varnish build-up. Yes, I could use a gas additive (and I often do), but with lots of cars and equipment, and full gas tanks in each, that's lots of Stabil! And, in regards to leaving the mechanical pump in the line, I've done that numerous times, but one thing to consider is this: if you do that and the rubber diaphram of the mechanical pump fails, you'll get raw gas going into your crankcase and diluting your oil... and not know it!

Public Service Announcement.Time to spring into warm weather driving mode. Remember to reverse your car's battery cables to change heater to cooler function. Happy Motoring to all.

Ok. So. That was probably the most spectacular celestial thing I've ever seen. I still wouldn't go out of my way to see another total eclipse, but I am definitely glad I got to see this one. We were in the 100% zone, the skies were crystal clear, and we had an unobstructed view, so for three minutes and some seconds, all you could see was the sun's corona, and three stars/planets that popped up, seemingly out of nowhere. Like turning on a light switch. Funny light effects for an hour leading up to it during the partial eclipse, then BAM, it's dark, the temp dropped a good ten degrees, the wind stopped, everything got quiet, and you could look at the moon/sun with the naked eye, surrounded by the awesome display of the sun's corona. I guess I was expecting groups of white-robed Druids to pop up chanting pagan rituals, not that that didn't happen, but I didn't see any. I had to go through town earlier in the morning and it was already crowded at 0800, but then we stayed home. Had some friends over later to watch the event, who said it was packed downtown when they went through at about 12. Doesn't look like we got the full quota of madness that was predicted, but still got enough people to challenge our planning and preparations. Traffic on I-95 northbound was not quite bumper to bumper, but it stopped to watch the event for a good 45 minutes. The day isn't over yet, though, and tomorrow is worthy of staying home, too, everyone who trickled in over the past three days will be leaving at once. I got a kick out of this - there was a rumor going around that Taylor Swift flew into the Houlton International Airport on her private jet to witness the total eclipse. A friend was assigned to monitoring inbound air traffic, (his wife and kids were who came to our house to witness the event), all he would say was that a fancy private jet flew in, but he wouldn't confirm/deny her presence, despite our encouragement to propagate that rumor whether true or not. So, if you've never been outside, standing on the ground, to actually see a total eclipse in person, I think you've missed something worth seeing. Won't be another one in North America for something like 20 years.

My photo dump. Sadly we missed "Friend of the Show" pic. I'll update pics with the awards tomorrow. Twinsies the grand master Tim! Best Non Mopar: Katy 71 Range Rover Best Hard Working Truck: Joe Light Blue B1/B2 Best Built Truck: Dan Red C series Best Fastest Looking Truck: Brett R/T Challenger (it identifies as a truck) Best of Show: Bud Red modified B3/B4 Not shown: Friend of the Show: Nick 4x4 B1/B2 Wish you were Here: Keven B1B (sorry have the year wrong in the note, I was looking at Brent)

A beautiful example of a Special Deluxe! You notice the only reason the coin fell over was the torque of the engine when it was revved up.

My love of old cars started with the Model T. I have a 27 Roadster and a few others. The Model T driving experience is not one I’d offer to just anyone however! I sold a 27 tudor to a guy and gave him the whole driving lesson. A week later I got an email describing how he pressed down on the low pedal thinking it was the brake, drove into another car then took his foot off the pedal. I am glad he didn’t send me a photo. My philosophy of old cars is we are stewards of them for the time we have with them. They can certainly out live us if we are careful with them or we can destroy them in a split second. When you consider the history of the world since your 26 was made it is remarkable that it is still here, let alone the human race. When someone goes on about how they want to put their Plymouth body on an S10 chassis, I cringe. That ole Plymouth could live on for decades and still be a nice car. Once someone “modernizes” it, it has taken a big step to the scrap yard. Consider the car magazines of the 1950s. Where are all those “Customized” cars that graced the magazine covers now? Survivor cars got that way because of the stewardship of a chain of owners. In some cases it was just benign neglect that contributed. Cherish your old car and it may out live you!

In my mad mind there is only one way to operate an Overdrive, that is as the factory intended. The thing is called Automatic Overdrive for a reason. It works so well without drama when installed properly I just don't understand why anyone would jury rig one, except ignorance of how to wire one properly. I've never stopped looking for easier cheaper cleaner ways to do it right. Throttle switches are way over priced from suppliers who think they have you over a barrel. At $125 I think that is obscene. I found a seller on eBay who had hundreds of military surplus bus door switches that do exactly the same thing as the reproductions and even looks the same for $6.50 ( I bought 10 for gifts to friends ) The reproductions are really floor switches for Ford products anyway. The MoPar switch is smaller and fits on the carburetor. Those can be had from the Studebaker guys for around $35 but you need to make a simple bracket and rig a lever on the carburetor throttle ( or find an Overdrive ready carburetor ). My latest and greatest find is a small switch with a pull cable from a Nash/AMC for $21. I really like this one as it is so clean and simple. Since you connect it to the lever that comes from the foot pedal its action is really smooth and effortless. You can change carburetors and manifolds without re-engineering how you trigger the switch. Then there's the relay, another obscenely priced item at $125. If you have changed to 12 volts one of the little Bosch style cube relays will work nicely for about $2.50. I like my 6 volt cars and found the same thing made in Germany for 6 volt for $18, but I am told the 12 volt version will work with 6 volts if you get the high amp version. The last thing is how to wire it. If you have a shop manual there's a description which also has the color the wires should be in there. Seems to me the only valid reason for not having a shop manual is illiteracy ( trust me I am not joking on this. Literacy is still a major problem especially in auto repair ) I have found that sometimes the Plymouth manual is short on an explanation and photos so I have all the MoPar manuals for the era of my Plymouth. But then I love shop manuals. I am the person your Mom told you about who reads technical manuals for entertainment. lol Anyway that's my two cents. If it works as intended you are not dependent on "Driver technique" and you can let anyone drive your car ( but why would you let anyone drive your car? )

Oilite is a sintered bronze material that is self lubricating. Chrysler has used to for 70+ years, I'd pass on the steel one. You can punch in the mopar part number, 53298, into NAPA's website and they sell the bushing for under $5. Autozone wants $25, pass, lol. Dorman Bearing 690-005 works too

Here is something you might consider. Having the cable break and not being able to release the hood latch would be a major irritation. I applied the same remedy I put on my TR6 which has hinges on the leading edge of the hood. If that cable breaks you really have a problem! I added a second cable for emergency release and it has a handle in the left front fender well. I can reach up in the fender and release the latch with little effort.

Nice! Bought my Plaza for 80$ in 1970. No surf racks requied

Might be the voltage regulator. Simple test, start the car and use the hand throrrle to up idle to 800 or so. Use a jumper wire to ground the field terminal. The field terminal is the smaller diameter generator terminals. The ammeter should peg to full charge. If it does the generator is working, and the fault is in the regulator and or it's wiring. If the regulator cover will come off, remove the cover and clean all these points. Retest. If still no charge, check the regulator wires and connections.

A little temperature increase when you stop is normal. At idle there is less coolant circulating and less air flow because the fan is spinning slower. This causes a bit of heat soak and your temp gauge will go up some. It should stabilize and go down again once you have more RPM and air flow.

If you get an email saying your password is expiring do not click on the link. It is a phishing attack attempting to get your login information. We do not have a password expiration policy at this site so ignore and delete any such emails. I do recommend setting a unique password for this site, and using a unique passwords for other sites you visit. I also recommend using the two factor authorization option on your account for additional security.

Click-bait title, you see 😅 Just in case you did not get it, this is an older Carter ceramic fuel filter, to complement my B&B. Got it a while ago, and finally had a chance to put it in, along with a 1/2 carb spacer. Will see how that works out 😏

Have someone step on the clutch (you need the clutch pedal working) while trying to install. This will release the clutch and allow the disc to move and align to the shaft and should seat the trans.

My son was able to assist today, so with further assistance from a U-Haul trailer and my tractor to do the pushing and pulling, we got it loaded and hauled to the house. Of course, I took an awkward fall on my back, hurt like hell, so my son did everything but run the tractor.

Two hours after arriving from the shelter.

Could it be exhaust heat riser flapping around? Wire it in open (rotated fully clock wise) and wire it there temporarily. Might also be the flapper shaft leaking. Remember if you decide to remove the manifold assembly, there are 13 fasteners holding it together. When reinstalling, leave the four bolts holding the manifolds together just snugged. They can then get a final tighten when finished tightening the 13 manifold nuts. Another consideration when putting the manifolds on, tighten the fasteners in a spiral pattern starting in the middle and working outward to the ends. Do not over tighten. Snug them then add quarter turn, start and run the engine to operating temp. When it has coold enough to work on, snug and quarter again from the center out. Then check the 4 on the heat riser. These assemblies heat and cool at different rates, they need to be able to move as they do so. Over tightening prevents this and leads to cracking. Remember the magic number is 13 plus 4(heat riser) When I did mine, I took an old Taiwan box end wrench took out a section of the box like a tubing wrench, and ground it thinner to make it easier to get the nuts that are partially obscured behind the exhaust casting. Good luck.

As others have said, the Dodge/Chrysler/Plymouth/DeSoto flathead sixes have hardened exhaust valve seats from the factory, and they are very capable of handling modern, unleaded gas without any issue. They came that way starting in 1933 or 1934, and remained that way throughout all years that they were produced, which was well into the 1970's. So you don't need to worry about that.

I speculate that pre ww2 bolts were more likely to be cut but with the advancements in the military equipment, i.e. planes, etc, stronger threaded fasteners were needed. Just a thought. dan...

The dimmer switch might have corrosion on the contact points. Press the dimmer switch several times to clean the contacts. Check the fuse for the light switch might be blown. Go to the headlight junction block and use a test lamp to see if you have current flowing to the connection block. If you have power to this section then your lights might be toast. Pull a headlight bulb disconnect the wire connecter then test with a 6 volt battery charger to see if they light up. If they light up then check each connecter at the base of the bulb to see if you have current flowing to the socket. Also could be a grounding issue or maybe the bulbs are bad. Just basic diagnostic procedures. Rich hartung desoto1939@aol.com

The filter is far from the headers. The pipe that it is close to is an intake runner, and when the engine is running those runners stay very cold. That's why I built it like that. Cold air is denser and allows more power to be made. The long runners introduce a ram effect on the intake charge and produce more power. This was a question about installing the windshield and rear window.

Another vote for making your own. It’s like a puzzle to solve. You screw a few up. You learn. You get better. Building and shaping your first ever 3 ft line across the left rear axle housing? Order two 25 ft rolls of 3/16” brake line tube. 😄

preformed and then curve and bent to fit a box for shipping, you better off making your own tailor fit set.......

By turning the ignition on and then off you did the same thing the points do when opening and closing, letting the coil fire a plug, and if a gas mixture is in that cylinder when it fires it'll rock the engine. That's my guess.

Just use a torch to get the plug red hot....that oughta bust the rust loose................. 😲 🤣

Mark does an excellent job explaining the inner working of the doors. Check it out. 1941 Plymouth Restoration (#13) The other videos in his series are also very well done. You can tell he was an educator.

you may be onto something Sniper, I am going to say a rolling wheel gathers no red paint.....

See now a song comes to mind I see a black wheel and I want to paint it red Apologies to The Rolling Stones

I use the in my opinion a lot because most of my unsolicited comments are just that, an opinion and in no manner saying good bad or indifferent....but just as I see it. The fact I will then state the whys and wherefores of my opinion is to say that it is not just a whim or silly notion and give some background, color and size ratio etc...technically I could care less one way or the other what anyone chooses to do as it is not my car no more than if a person likes or dislikes what I do with mine. Big hobby folks, I will admit at one time it would rankle me see what some folks may do...but hard lesson to learn is JUST NOT MY BUSINESS....the red wheels, there is NO WAIVER here......lol

•pinched tube on intake manifold appears to be the vacuum source for the vacuum windshield wiper motor •intake manifold appears to have a partial PCV setup •spark plug wires appear a little on the long side...universal sets with 90° boots can be sourced

Rmon...........Can I throw a curved ball into the ring...........lol............in 1973 I installed a 318 Poly V8 in my 1940 Oz Dodge.............at the time there were no instructions available nor did I have much in the way of outside help but I could weld and use a tape measure so I had a go.........I was 19 and basically did a few things more than once but I still have the car & its Poly V8.........now you have a 1954 Plymouth.......did you know that in 1957 Chrysler here in Australia introduced what they called a Chrysler Royal..........it was based on the 1953/54 Plymouth body and chassis with 1955/56 front & rear fenders attached.............the interesting thing that you need to be aware of is that the Chrysler Royal for the 6 yrs of its use in Australia from 1957 to 1962 had a 313( essentially the same as the 318) Poly V8 which is basically the same block as the 1966 onwards 318/340 & 360 V8's that mopar used and in fact these later engines are in fact not as wide nor as heavy as the earlier 313/318 poly and also use a much lighter transmission............your best bet would be to get as late an LA series Mopar V8 & trans that you can, also a later rear axle from either a mopar or something else that fits & a disc brake conversion for the front and have at it ..........I've attached 3 pics of the Oz Chrysler Royals showing that 1953/54 Body shell....each in these cars was available with a 313(318) Poly V8 and cast Iron Torqueflite push button trans.......also a couple of pics of my 1940 Dodge 4dr Sedan & the 313/318 Poly V8 thats lived there for 51yrs now........regards from Australia.......Andy Douglas

Second that thought. Never saw a plug blow apart on a flathead till I had three Champion plugs do it over two days. Switched to AC and never had another issue, same with the NGK which I also use in all my small engines, ATVs and motorcycle.

Champion spark plugs...ran them for years in everything from V8s to single cylinder lawn and garden equipment...then in the late 90s, they needed to be replaced more often from electrode wear, and by the mid aughts they were blowing apart in the small engines, larger engines were fouling and hard to start in cold weather. Switched to AC Delco on big engines and NGK in small and haven't had a lick of trouble since.

Since the easiest position to replace the bearings is at the bottom of the stroke, two cylinders will have the best access, the other 4 will have severely compromised access. Replace the bearings in the two at the bottom one at a time, rotate the crank until another two are at the bottom, do those and then rotate again to get the last two. It only takes about 4 inches of fuel line that way.

I'm moving right along on my '52 Suburban build. This week I finished upgrading the brakes to a dual master cylinder from ECI Hotrod Brakes and Brackets. It's very well made and I had no trouble fitting it to my existing underfloor brake pedal. The instructions were good, and the only thing I had to buy extra was a bracket off eBay, to hold the combination valve below the master cylinder. I tried to re-use all the original clutch parts that I could, but needed to add a bit of metal to the clutch pull back spring arm as it was wallowed out, and install new clevis pins. My wife donated her old tan purse for the clutch fork seal. I saved some $ by using the P15D24 Forum template and made one myself, as AB and others are all out of stock. Next-steering column fun! ECIChrysler.mov