Jump to content

DJ194950

Members
 View Profile  See their activity

  • Posts

    3,789

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by DJ194950

  1. DJ194950

    waterpump

    DJ194950 replied to johnjnr's topic in P15-D24 Forum

    Sealer on the bolts as they all go into water jackets of the motor. As they are are old I,d suggest something on the thicker side and not thread lockers which are thin. I do not like silicone sealers with bad luck- others have used them OK. Prefer Permatex brands myself, but? DJ
  2. DJ194950
    Jacob126, Check out this co. for weld on Mopar motor mounts and trans for V-8,s to older Mopars. https://www.hotrodhotline.com/butchs-cool-stuff-quality-line-1928-1965-custom-and-rodder-parts DJ
  3. DJ194950
    Buy a piece or two from a local (auto) upholstery shop made for doors and kick panels and is very reasonable priced and good with moisture. My two cents, been there - - - , DJ
  4. DJ194950

    Kew Engine,

    DJ194950 replied to Pauld's topic in P15-D24 Forum

    Pauld, Maybe try calling this company that has many parts made for them by top companies for older cars. My make some parts themselves. Maybe they can help you or direct you to one that will make the parts for you? https://egge.com/info/catalog/ Best to ya, DJ
  5. DJ194950
    Cannot say these days but Calif. had for years outlawed them. Had a good friend years ago who drove a service truck 3/4 ton from central Ca. to the S.F. area (90 miles + per day) 5 + days per week with No enforcement actions. The Ca. highway Patrol had many other big issues-then and now. Also while researching Ca. found this on Wash. https://law.justia.com/codes/washington/2012/title-46/chapter-46.37/section-46.37.5185/ Still illegal, someone on this forum must be up on this? DJ
  6. DJ194950
    Why is the spring of the points (metal about 1/4 wide) not under the screw with the black wire to the condenser and the yellow out to the coil connection. Picture make look that way? DJ
  7. DJ194950
    My 230 ci Mopar rebuild did the exact same -close, but not right on. I removed twice, checked for TDC on compression stroke both times no change. Shrugged my shoulders and moved ahead with build. My car runs very strong for a old flathead motor, no problems what so ever. Up to you. Talk to machine shop first about this if you had/have one? DJ
  8. DJ194950
    Real problem is- where can you get some Real guarantee that what you paid more ( if you could locate some) for is good functioning quality product wherever it is made? Very few seem to be actually available nowadays. Almost all use some (used to be Good brand names) and cheaply made overseas-mostly China! Most here would choose to pay more but with no assurances??? I believe this would be true with real life use experiences. Nos for some products new or old rebuilt products made is the US is no longer any guarantee of long lasting parts. Old rebuilds with old rubber is a good example. DJ
  9. DJ194950
    Check out- Control Cables- they sell a set up with pull handles/splitter for cables/cables made per specs. you choose. http://www.controlcables.com/ ??? DJ
  10. DJ194950
    EBay used to sell them but have not looked lately. DJ
  11. DJ194950
    Wilwood Brakes has on their website instructions (video? I read a car mag. for this info) -the way to bed in new pads ( and rotors) the proper way for best life and braking. A few more steps than most people would ever do- but you want the best possible response? At least take a look and then decide if it works for you! Just a thought, DJ
  12. DJ194950
    As they say, as long as your are satisfied. Otherwise looks great! DJ
  13. DJ194950
    Look around on the web. If you find nothing, try these people- last resort as they are not cheap-mostly. https://rareparts.com/ DJ
  14. DJ194950
    Is dumping the exhaust ahead of the rearend stock? I Do not have any experience with the Dodge trucks. Pretty obvious at times! DJ
  15. DJ194950
    Well I ordered online some summer open air type sandals. On 6/25 I received online order confirmation. Then I received notice of waiting for USPS for pickup on 7/1 with the tracking #. Following up with tracking # it appears that it has not moved?? Seller/shippers issues?? Chinese seller with ship still waiting to get container ship to port with a lie about being shipping? Normally USPS delivers reliably here but Slowly !!. DJ
  16. DJ194950
    From only one experience with Liquid tape I hated it no resistant to wear at all. I worked with rental construction lifts etc. and that product would Never hold up. Totally disappointed with it as a quick- easy repair and never used again. Your choice. I will never use it again. DJ
  17. DJ194950
    I don't lose whatever is needed. I have one. Just where is it?? Sometimes it is quicker to buy one when needed. After the work is done I - usually either remember where it is or I stumble across it! Later!. ? Well I now have two of them for next time to try and locate- should I put both in one place or try two different locations? ? DJ
  18. DJ194950
    Brake master cylinder for sure. Open and take a sniff. Not to much!! Kidding! ? DJ
  19. DJ194950
    Just ran across this place for film strip to digital. Add sound? unknown? https://shop.cintrexav.com/negative--film-strip-services-p23.aspx DJ
  20. DJ194950
    Buy a cheaper AC setup for the garage wall and move in there for a bit. Bed/s/ coffee maker/ small refrigerator? Weather is a changing! DJ
  21. DJ194950
    Was the manifold/s checked for flatness? Intake and exhaust manifolds set on separated and tightened down and slowly pulled in? Bolt between intake/exhaust tightened together last? DJ
  22. DJ194950
    Turn the AC on highest settings - - Front window open? Vent windows turned backwards. Cowl vent open fully. Avoid driving in traffic/slow down too much! Continue to enjoy your drives!! ? Your temps are higher than central CA. at this time- it's only supposed? to get to 101 F. today and next several DJ
  23. DJ194950
    https://www.specialtypowerwindows.com/power-windshield-wiper-kits?useYB=2&cam=ppc-m-m33269-c768936-g2368484-&ClickAttributionId=f7b408334c391c1b53a168e510b095e4 Use this new type setup. Or have your motor rebuilt by local? rebuilder of motor to change windings for 12Buy Or a purchase a 12v. to 6 v. heavy duty voltage reducer. Use search forum to research this this and has been written about many times? Never used this myself, but sounds OK. Up to you to check these options out as some possibles? DJ
  24. DJ194950
    Check the flywheel to crank bolts for tightness. Found a similar type noise and it was loose flywheel bolts/nuts. DJ
  25. DJ194950
    There is normal (somewhat) inflation and EBay inflation where all sellers lose the minds in a short time with Large price increases at the same time shipping prices go way up! ? ? DJ
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use