knuckleharley Posted May 24, 2021 Report Posted May 24, 2021 30 minutes ago, NickPickToo said: On this day. Monday, May 24, 2021 at 3:30 pm. I was able to get the brake lights to work properly My P15 1947 Plymouth 2 Door Sedan is now street legal ? So,why are you wasting your time telling us about it,when you should be out driving around in it? 1 Quote
NickPickToo Posted May 24, 2021 Author Report Posted May 24, 2021 17 minutes ago, knuckleharley said: So,why are you wasting your time telling us about it,when you should be out driving around in it? still working out some of the aesthetics and acoustics Quote
NickPickToo Posted May 26, 2021 Author Report Posted May 26, 2021 On 4/25/2021 at 11:05 PM, tom'sB2B said: That's a natural exhaust splatter for a 74 year old. Now I will go stand in the corner. BTW. I look forward to seeing the results from that heat shield. ? Update on this. The carb heat shield seemed to work well. I could really feel the temp drop above the shield with and without. However, we started to have excelerator related issues related to getting the linkage set up right. It was getting stuck in exceleration. Great if I'm drag racing but a bit unnerving when your going down the road. I think I have it fixed now. The heat shield was a real pain when it came time to mess with the linkage. Running without the shield for now until I'm sure the excelerator is really stable. Plan to modify the heat shield so I can reach the adjustment points I was having trouble with. Quote
NickPickToo Posted May 28, 2021 Author Report Posted May 28, 2021 Connected the oil pressure gage today. Reading a steady 40. Having trouble figuring out how to get the temp sending unit end of the of the temp gage connected to the engine. I know where it goes, but it does not look like it fits directly into the engine. Is there a housing for the sending unit? Could someone share a picture of how this should look once connected? Quote
NickPickToo Posted May 28, 2021 Author Report Posted May 28, 2021 never mind. Found the sending unit thread on the forum. Now just need to find an adaptor that the fat end of the unit will fit through Quote
Sniper Posted May 28, 2021 Report Posted May 28, 2021 Regarding your heater motor, this is what I did with my 51. Not sure it helps. http://www.yourolddad.com/blower-motor 1 Quote
NickPickToo Posted May 28, 2021 Author Report Posted May 28, 2021 Today we go to the SOS office to get registered and tagged ?. That's not easy lately as you have to go on line every day at 8:00 am and 12:00 noon to try and grab the next appointment that was released (else you can wait till mid august). Usually the site is down from too much traffic and by the time we get on the appointments are gone. Not this time! 2 Quote
greg g Posted May 28, 2021 Report Posted May 28, 2021 (edited) Looking forward to the first drive report hopefully with pictures. You did well young sir. I have had my 46 for 51 years. It still makes me smile. Hopefully you will have a long and enjoyable time with your new car. Drive safe! It is said by insurance companies the most accidents involving inexperienced drivers happen through distraction from passengers in the car. I know all your buddies are going to want to pile in and go skylarking about with you. Limit your riders till you know the cars limitations as well as its capabilities. 5 or six people in the car will put a lot of demand on your 70 year old brake system and skinny tires. End of lecture, have fun! Edited May 28, 2021 by greg g 1 2 Quote
NickPickToo Posted May 29, 2021 Author Report Posted May 29, 2021 (edited) Still working on making it look better, but out for a drive today. First stop O'Reilly's to say thanks to the team for helping us find a lot of the odds and ends. Fasted speed on the main road the speedometer read 55, but the gps tracker on my phone clocked me at 60. That was just comfortably going with the flow of traffic. Engine running at high rpms at that speed so pretty sure that top end for me anyway. Edited May 29, 2021 by NickPickToo 7 Quote
greg g Posted May 29, 2021 Report Posted May 29, 2021 What size tires are you running? With mine, 65 on the speedometer is 62 on the GPS. The rpms work out to 3280 at that speed my rear tires are 225 75 15. 1 Quote
Sam Buchanan Posted May 30, 2021 Report Posted May 30, 2021 Congratulations Nick! You have accomplished something that very few young people attempt and have formed memories with your dad that you will cherish for the rest of your life. Yep, 55-60 mph is the sweet spot for these cars and the stock brakes are pretty much maxed out in modern traffic at that speed as well. Be safe and enjoy.....you earned it! ? 1 1 Quote
NickPickToo Posted May 30, 2021 Author Report Posted May 30, 2021 3 hours ago, greg g said: What size tires are you running? With mine, 65 on the speedometer is 62 on the GPS. The rpms work out to 3280 at that speed my rear tires are 225 75 15. 215/70R/16. Also converted to disk brakes up front. How do you work out RPMs without a tach? Quote
JBNeal Posted May 30, 2021 Report Posted May 30, 2021 (edited) additional information - temperature gauge gland nut additional information - engine speed calculator Edited May 30, 2021 by JBNeal added link 1 Quote
NickPickToo Posted May 30, 2021 Author Report Posted May 30, 2021 Big hit yesterday at my friends graduation party 7 Quote
greg g Posted May 30, 2021 Report Posted May 30, 2021 (edited) There are a couple of calculators on the internet. You put in your diff ratio, your tire overall diameter, (also a couple sites with this info) and your top gear ratio which is 1 to 1 unless you have an overdrive. With that data plugged in it will spit out rpms give or take a few. Some of the calls are on off reading pages and as for transfer case ratio if so put 1 to 1 in that space also. Edited May 30, 2021 by greg g Quote
greg g Posted May 30, 2021 Report Posted May 30, 2021 Just noticed that it is a 2 door sedan. Not many left around. Other than the convertible, that was the least produced body type. Enjoy! Quote
knuckleharley Posted May 30, 2021 Report Posted May 30, 2021 7 minutes ago, greg g said: Just noticed that it is a 2 door sedan. Not many left around. Other than the convertible, that was the least produced body type. Enjoy! Really? I have to admit this surprises me. I would have thought the 2drs would have been VERY popular with people who had small children. Quote
NickPickToo Posted May 30, 2021 Author Report Posted May 30, 2021 215/70R16 = 27.9" f(60 MPH, 27.9", 3.9:1RGR, 1:1 TCR) = 2820 'ish f(55 MPH) = 2583 'ish Does that make sense? Quote
Young Ed Posted May 31, 2021 Report Posted May 31, 2021 2 hours ago, knuckleharley said: Really? I have to admit this surprises me. I would have thought the 2drs would have been VERY popular with people who had small children. Back then 2drs were also cheaper. I would expect the convert and woody to be the least Quote
RNR1957NYer Posted May 31, 2021 Report Posted May 31, 2021 8 hours ago, NickPickToo said: Big hit yesterday at my friends graduation party Ah, Grasshopper, you have finally learned our secret: flathead Plymouths are chick magnets! Quote
Merle Coggins Posted May 31, 2021 Report Posted May 31, 2021 Why is the hood laying on the lawn? Quote
NickPickToo Posted May 31, 2021 Author Report Posted May 31, 2021 (edited) 2 hours ago, Merle Coggins said: Why is the hood laying on the lawn? It's a short story, but I'll spare you the gory details. Edited May 31, 2021 by NickPickToo Quote
NickPickToo Posted May 31, 2021 Author Report Posted May 31, 2021 Completed some much needed touch up paint today. These are the last pics without the belt trim. Thanks to Mr. J (Young Ed), the source for the horn and horn relay mounts. 2 Quote
NickPickToo Posted June 1, 2021 Author Report Posted June 1, 2021 Making the rounds to say thank you. Mr. Mike owns the hardware shop in Howell MI. He's got just about every type of fastener or pipe union you can imagine. If he doesn't have it he can find it. Mr. Adams and his son rebuilt the inside of my engine. Quote
NickPick'sCrew Posted June 8, 2021 Report Posted June 8, 2021 Proud Dad Moment. This is a link to the local car show that came out to visit nicholas https://speedandshine.com/47-plymouth/ 8 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.