Jump to content

Well gentleman I did it and she's home 1934 Plymouth PE business coupe


Solly

Recommended Posts

It took awhile 50 years to be exact but my dream has finally been realized , fat fenders and running boards !! All went well, sales transaction,  (private party) title transfer and registration  with the 1934 vintage stamped from copper license plate, any way I am very impressed with a few things 1. how quickly and easily it fires up , I was a bit skeptical of the 6 volt system

2. how well it rides and steers even with the bias ply tires. 3. how smoothly and quietly that flat head runs, it actually rides better and quieter than my 56 Olds.

I named her Fannie Mae . If your from the Midwest and love chocolate you may recognize Fannie Mae as the big chocolate company from Chicago. she reminds me of a big box of assorted chocolates and caramels , this color combo may not be everybody's cup of tea but it works for me and turns a few heads. I've heard some people say it doesn't show up on Plymouth color charts some say it is a factory color carrotine # 4 I think also referred to as the burnt cars ? I'm sure you here would know better than me I'm a pre-war Plym newbie !!

I'm learning more daily and as I dive in hope to learn more, I'm not sure what's 100% original to the car and what's not (I'm not a stickler for that) 

I hope to lean on you guys as I try to learn. here's a few pic's of Fannie.

 

34 dash.JPG

34 driver side.JPG

34 interior.JPG

34 grill.JPG

34 pass side.JPG

IMG_0813.JPG

  • Like 3
Link to comment
Share on other sites

Spiffy!  I have a pair of wing tip brogue in nearly the same colors.  I think they may be also known as spectators I think they were popular when your coupe was built.  Great lookng car enjoy have fun!⁶

,

Edited by greg g
Link to comment
Share on other sites

Thanks Gents !!

 I wish I could take credit for its restoration but I cant. I am the benefactor of somebody else's hard work. All I can do is claim to be the caretaker for the next generation.

I do have one complete restoration under my belt (1964 BelAir ) and partial on a 56 Olds but my increasing age and health necessitated purchase of a 98% completed veh.

Ill find enough maint. to keep me busy.

  • Like 1
Link to comment
Share on other sites

Congratulations on that purchase.

 

Another feature you should notice starting next April or May is that, if it has been gone over properly, it won’t overheat in the desert summer. You might have some issues with heat soak/warm restart because modern fuel is designed for injection systems rather than carburetors. But unlike some other brands of cars of that same era the cooling system is well designed.

Link to comment
Share on other sites

 Beautiful car. 201 ci 23” long engine I suspect?  If I recall in 1934 they offered “Free Wheeling”. Does your plymouth have this feature?

Link to comment
Share on other sites

Solly, welcome aboard from sunny South Grafton, Oztralia..........nice car mate!!............andyd

Link to comment
Share on other sites

1 hour ago, keithb7 said:

 Beautiful car. 201 ci 23” long engine I suspect?  If I recall in 1934 they offered “Free Wheeling”. Does your plymouth have this feature?

Well Keith,

You will have to excuse my ignorance on this "Free Wheeling" subject as I am still learning but from what the previous owner told me it was equipped with it (this PE was optioned with everything available on the business coupe ) there is a cable that runs from the dash to the trans I believe , there is also a unit or mechanism  between the starter and the gen that had something to do with auto clutch ? per the previous owner they have been rendered in op. some of my research suggest they were problematic and in some cases dangerous ?   

Link to comment
Share on other sites

1 hour ago, keithb7 said:

 Beautiful car. 201 ci 23” long engine I suspect?  If I recall in 1934 they offered “Free Wheeling”. Does your plymouth have this feature?

33 and 34 were before the 201. I think they are 176

Link to comment
Share on other sites

3 hours ago, Young Ed said:

33 and 34 were before the 201. I think they are 176

'33 was 189.8 or more colloquially, a 190. They stroked it to 201 in 1934. Then in 1935 they widened the block to fit the water distribution tube and made the water jackets full length. Bearings, pistons, etc. are the same for the '33, '34, and later 201 engines. All gaskets, etc. are the same for all those years except the head gasket which is a bit more narrow for '33 and '34. Crank and rods are different between '33 and the rest though you could drop a 201 crank and rods into a '33 to make it basically the same as a '34.

Link to comment
Share on other sites

Very clean and nicely done. Perfect time of the year in AZ to do some test drives and work out any issues. I worked out west of Goodyear and would take my motorcycle on I-10 to Tempe and man that pavement stays hot all night long in the summer.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use