NickPickToo Posted November 21, 2020 Author Report Share Posted November 21, 2020 2 hours ago, DonaldSmith said: The must have had a real powerful stapler that pierced the metal in the process. I used real small screws to put in my fuzzies. But that was in distant memory, and before I had a digital camera to memorialize processes. It's actually an easy install. Just run a bead of glue along the location where the whiskers attach and then set the garnish behind your refrigerator for a little while. Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted November 21, 2020 Report Share Posted November 21, 2020 I easy installed mine using popular clips synonymous with other makers of the era....quick and easy pop in...pops out easily if you need to later service a cracked glass etc....rivets will require drill out later...glue will mess up the paint and such also...screws are an alternative but must be very small heads to stay below the flocking at all time including aged projected wear. Quote Link to comment Share on other sites More sharing options...
Sam Buchanan Posted November 21, 2020 Report Share Posted November 21, 2020 19 minutes ago, NickPickToo said: It's actually an easy install. Just run a bead of glue along the location where the whiskers attach and then set the garnish behind your refrigerator for a little while. Hmmmm.......the suggestion I posted was to use velcro that has the strong stickum already on the velcro, it is pretty aggressive adhesive, no additional glue needed. Also, I used the 'wooly' side of the velcro, not the plastic 'whiskers'. Quote Link to comment Share on other sites More sharing options...
Sniper Posted November 21, 2020 Report Share Posted November 21, 2020 Years ago i used small pop rivets to attach the fuzzies. Seems to have worked ok. Quote Link to comment Share on other sites More sharing options...
NickPickToo Posted November 21, 2020 Author Report Share Posted November 21, 2020 13 minutes ago, Sam Buchanan said: Hmmmm.......the suggestion I posted was to use velcro that has the strong stickum already on the velcro, it is pretty aggressive adhesive, no additional glue needed. Also, I used the 'wooly' side of the velcro, not the plastic 'whiskers'. I guess that's what I get for trying to use one of my Dad's jokes Quote Link to comment Share on other sites More sharing options...
Sniper Posted November 21, 2020 Report Share Posted November 21, 2020 Ah, young grasshoper, Dad jokes are an art form, keep practicing and one day you will master them, much to you children's chagrin. Quote Link to comment Share on other sites More sharing options...
NickPickToo Posted November 21, 2020 Author Report Share Posted November 21, 2020 Does anyone get it? Sticky substance + dusty location = fuzzy trim Quote Link to comment Share on other sites More sharing options...
NickPick'sCrew Posted November 21, 2020 Report Share Posted November 21, 2020 Son, don't ever explain your jokes. Just process the miss and move on till the next opportunity 3 Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted November 21, 2020 Report Share Posted November 21, 2020 all I saw was glue with dirt on it....glue was a rare commodity back in the day of this vehicle build...glue would work given you NEVER had the NEED to revisit the crime scene but still screams short cut... Quote Link to comment Share on other sites More sharing options...
Sam Buchanan Posted November 21, 2020 Report Share Posted November 21, 2020 (edited) 4 hours ago, NickPickToo said: I guess that's what I get for trying to use one of my Dad's jokes Ok....guess I whiffed on that one...and according to my family I am an authority on Dad jokes.... ? A closer look at your photo reveals you did it the "correct way". Carry on, young man! Edited November 21, 2020 by Sam Buchanan Quote Link to comment Share on other sites More sharing options...
NickPickToo Posted November 21, 2020 Author Report Share Posted November 21, 2020 It may not be as shiny as the newer script, but I think the "vintage" stripped down scripts fits the color better. Opinions? 2 Quote Link to comment Share on other sites More sharing options...
kbuhagiar Posted November 21, 2020 Report Share Posted November 21, 2020 37 minutes ago, NickPickToo said: It may not be as shiny as the newer script, but I think the "vintage" stripped down scripts fits the color better. Opinions? I think you can't go wrong with either choice, but I prefer the one on top (no red). Quote Link to comment Share on other sites More sharing options...
casper50 Posted November 21, 2020 Report Share Posted November 21, 2020 Nick no red. lol Quote Link to comment Share on other sites More sharing options...
NickPickToo Posted November 21, 2020 Author Report Share Posted November 21, 2020 It will also be easier to make the new one look the same as the older one than the other way around Quote Link to comment Share on other sites More sharing options...
NickPickToo Posted November 21, 2020 Author Report Share Posted November 21, 2020 Little more eye candy 4 Quote Link to comment Share on other sites More sharing options...
Frank Elder Posted November 22, 2020 Report Share Posted November 22, 2020 16 hours ago, NickPickToo said: It may not be as shiny as the newer script, but I think the "vintage" stripped down scripts fits the color better. Opinions? Stripped with red! Quote Link to comment Share on other sites More sharing options...
Dryerventwizard Posted November 22, 2020 Report Share Posted November 22, 2020 1 hour ago, Frank Elder said: Stripped with red! Wow that is nice 1 Quote Link to comment Share on other sites More sharing options...
NickPickToo Posted November 23, 2020 Author Report Share Posted November 23, 2020 (edited) Dad finished the trunk out for me last night. I'll give him a thumbs up. Whole trunk has sound strips and insolation. Walls are vinyl fabric from Joan fabric including the tire well walls. There is a more rugged all weather carpet in the center tray and the bottom of the wheel well. The tweed insert ties it all back into the color scheme. All the center pieces are installed to be easily removed so I can get to the gas tank access panel. Edited November 24, 2020 by NickPickToo 3 Quote Link to comment Share on other sites More sharing options...
sidevalvepete Posted November 23, 2020 Report Share Posted November 23, 2020 Looking good Nick. I always enjoy your progress updates.? Quote Link to comment Share on other sites More sharing options...
casper50 Posted November 23, 2020 Report Share Posted November 23, 2020 I agree with both statements sidevalvepete. Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted November 23, 2020 Report Share Posted November 23, 2020 5 hours ago, NickPickToo said: Dad finished the trunk out for me last night. I'll give him a thumbs up. Whole trunk has sound strips and insolation. Walls are vinyl fabric from Joan fabric including the tire well walls. There is a more rugged all weather carpet in the center try and the bottom of the wheel well. The tweed insert ties it all back into the color scheme. All the center pieces are installed to be easily removed so I can get to the gas tank access panel. I like it,but lose the carpet in the wheel well. Water will eventually gather there,never dry,and rust it out. This is assuming "wheel well" means the same thing to you as me,the will in the trunk where the spare tire goes. Quote Link to comment Share on other sites More sharing options...
NickPickToo Posted November 24, 2020 Author Report Share Posted November 24, 2020 Look what I found inside the vinyl cover on the sun visors. It's the original visor cover crumbling into dust on the edges. The internal board is in great shape. I really like the trim and stitching around the edge on the original so we will try to replicate that. Quote Link to comment Share on other sites More sharing options...
NickPickToo Posted November 24, 2020 Author Report Share Posted November 24, 2020 (edited) Need an assist. I cant recall what specific order that this hardware for the vent windows go back together. Thought I took a picture, but there have been too many pictures. Looking it up in the parts manual, but do any of the original masters know off the top of their heads? Edited November 25, 2020 by NickPickToo Quote Link to comment Share on other sites More sharing options...
Conn47D24 Posted November 24, 2020 Report Share Posted November 24, 2020 Pointed washer in the slot first, then 2nd same washer under the slot, then spring, then nut. Point the washers, both, at the elbow of the window, front. 1 Quote Link to comment Share on other sites More sharing options...
NickPickToo Posted November 25, 2020 Author Report Share Posted November 25, 2020 ? 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.