Jump to content

Recommended Posts

Posted

Hello All,

 

I got this from a friend.

 

I DO NOT know anything about this truck OR it's owner!

 

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Need a 4 passenger freeway friendly Rod or modern car.  Have this to swap.

 

Frame off, new rebuilt 318 poly Push button automatic.  Vintage ac, power

steering all professionally installed.  Leaf springs front, stock steering wheel. Etc

Contact. do3.8523439@gmail.com

Palm Springs, CA area

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

 

Good luck!

 

v/r,

Matt

post-7025-0-50815100-1416190891_thumb.jpg

  • Like 1
Posted

I once had a Dodge PU of the same design. Going across severe bumps such as railroad tracks at speed would cause the front end to oscillate wildly. I replaced the king pins and fixed that problem. After the repair the truck was very drivable at all speeds. Wish I still had it.

  • Like 1
Posted

I think the answer lies in the first few words of the opening sentence;

 

 

Need a 4 passenger freeway friendly Rod or modern car. 

 

Kind of hard to get 4 passengers in the cab of that pickup. Nice looking truck though.

Posted

My daily driver is a 97 F-150 three door extended cab pick up. Last week My wife and I went to watch our 15 year old granddaughter in a school play. We had to stick around after the play to take the granddaughter home. Much to our surprise the granddaughter emerged from the auditorium with 4 of her 15 year old girlfriends in tow. So these 5 girls all piled into the narrow skinny half sized back seat of my truck and my wife was in the front passenger seat. It was a true estrogen convention in my truck on the way home. :D

Posted (edited)

WOW! Six females in a Ford truck all at one time. May be a record: Contact Rigley's "Believe it or not".

Edited by pflaming
Posted
pflaming, on 17 Nov 2014 - 09:14 AM, said:

WOW! Six females in a Dodge truck all at one time. May be a record: Contact Rigley's "Believe it or not". 

What DODGE truck are you talking about???? Did you flunk reading comprehension???

Posted (edited)

Some times I'm just a bit careless, should be more careful. Sorry about that.

Edited by pflaming
Posted (edited)

PP...the small details and points of accuracy you see of thing as you maneuver through life are the very 'spices' that make it not only interesting but memorable...of course if you content with with a plain brown wrapper...then that is ok I reckon..boring as all get out, but okay...

Edited by Plymouthy Adams
Posted

PP...the small details and points of accuracy you see of thing as you maneuver through life are the very 'spices' that make it not only interesting but memorable...of course if you contend with with a plain brown wrapper...then that is ok I reckon..boring as all get out, but okay...

Sometimes I think there's a bottle inside PPs plain brown wrapper....

  • Like 2
Posted

I wonder why this truck is not freeway friendly with all the work the seller claims has been completed????

If this '56 has the stock differential, then it has 4.10 gears or the optional 4.86 ratio.  My truck with 4.10's is turning 2,850 at 60 mph and I would not feel comfortable driving this on a freeway every day.  

Posted

My errors in this post remind me to be more careful in my reading and responses. I will work on that. Sorry fellows.

  • Like 1
Posted

If this '56 has the stock differential, then it has 4.10 gears or the optional 4.86 ratio.  My truck with 4.10's is turning 2,850 at 60 mph and I would not feel comfortable driving this on a freeway every day.  

A Mopar L-6 engine should be able to run at 2850 RPM all day, everyday. You just aren't used to the sound and feel of that in this post 1973 gas crisis age of lower engine RPMs.

 

For me the various sounds and feels of the car running along with the engine near 3000 RPM bring back childhood memories of family road trips.

  • Like 1
Posted

Todd,

   I agree that older engines turn a lot faster than we're used to now days.  My point was that if I had to drive my truck and listen to the howl of the engine every day on the freeway, I don't think it would be pleasurable for very long.  BTW,  my truck has the 259 V-8 with horsepower and torque rated at 4,400 rpm but I still don't like going much past 3,000 with it.  As also mentioned, the beam front axle can also make for an interesting ride when bumps/railroad tracks are encountered at any speed.

  My first new car was a '70 Duster 340 that sounded just beautiful at 70 mph and 3,250 rpm.  Wish I still had it. 

Posted

Todd,

   I agree that older engines turn a lot faster than we're used to now days.  My point was that if I had to drive my truck and listen to the howl of the engine every day on the freeway, I don't think it would be pleasurable for very long.  BTW,  my truck has the 259 V-8 with horsepower and torque rated at 4,400 rpm but I still don't like going much past 3,000 with it.  As also mentioned, the beam front axle can also make for an interesting ride when bumps/railroad tracks are encountered at any speed.

  My first new car was a '70 Duster 340 that sounded just beautiful at 70 mph and 3,250 rpm.  Wish I still had it. 

 

I recently had to start driving my truck 70 miles a day for work. At 65 mph, the motor is doing about 2200 rpm, however the transmission, tires, and air noise are all louder at that speed. I'm sportin' ear plugs.

Posted

Sometimes I think there's a bottle inside PPs plain brown wrapper....

Ed........and that bottle is probably Poitin (Irish moonshine....pronounced  Pocheen) Makes the our hillbilly brew seem like Koolaid.

Now that we finally have confirmation that "PP" actually stands for Poitin Paul it sure explains a lot. I wonder if the Fire Dept found his still? :D

Posted

Or Pulque Paul.......shine fermented from the agave plant....makes tequila taste like aquafina.

Possibly? ;) Sometimes it is sort of hard to tell?

Frank;

Many years ago I worked with a bunch of fellows from the jungles of Guatemala and El Salvador. They were hard workers but a few beers was enough to get them pretty smashed. One weekend they were having a special party / celebration and had invited (insisted) I attend. They had made their local brew which I believe they called pulque. It wasn't anything like the Mexican variety. It was made by filling a goats stomach with fruit and burying it for some specific amount of time. I will tell you what.....it was nasty wicked stuff. I don't remember too much of that evening but I can still picture a whole group of them streaking several blocks on Wilshire Blvd that Saturday night.

 

El Norte Jeff

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use