Young Ed Posted October 1, 2018 Author Report Share Posted October 1, 2018 just a quick update-went to the junkyard and managed to salvage the springs and spacers for the gas tank. Now I can get that installed. Any suggestions on what to clean the tank out with? Looks clean on the inside but it's been laying around so I'd like to rinse out the dust etc.. Quote Link to comment Share on other sites More sharing options...
Dave72dt Posted October 2, 2018 Report Share Posted October 2, 2018 I might consider using some Stabil 360 in it. Supposed to help reduce corrosion and whatever amount of it that doesn't come back out will mix easily with fresh gas. Quote Link to comment Share on other sites More sharing options...
Young Ed Posted January 14, 2019 Author Report Share Posted January 14, 2019 Wow its been a while since I made any updates here! Yesterday I managed to get some time in. Started welding up the lower angle for the bed front. Got the bigger side all patched in and mostly welded. I only took a before pic so far but you can see most of the bottom was gone! 2 Quote Link to comment Share on other sites More sharing options...
Jomani Posted January 14, 2019 Report Share Posted January 14, 2019 Good to see that you are back at it. Not a lot a “W” series activity here so I have been hoping to see some updates. Gotta love those MN winters. I grew up south of you in Austin and spent my high school days patching up rust on my buddies cars. Quote Link to comment Share on other sites More sharing options...
Young Ed Posted March 25, 2019 Author Report Share Posted March 25, 2019 (edited) Got out the box sides over the weekend. They will need new angles. Got one removed. Edited March 28, 2019 by Young Ed 2 Quote Link to comment Share on other sites More sharing options...
Young Ed Posted March 28, 2019 Author Report Share Posted March 28, 2019 Removed the other angle today. Also flipped this one over and removed a nasty previous repair and part of an old fender. 1 Quote Link to comment Share on other sites More sharing options...
Young Ed Posted March 28, 2019 Author Report Share Posted March 28, 2019 Also picked up a champion 49-52 Plymouth radiator off eBay for cheap. Missing the cap but I was likely to replace that anyways. Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted March 28, 2019 Report Share Posted March 28, 2019 16 hours ago, Young Ed said: Also picked up a champion 49-52 Plymouth radiator off eBay for cheap. Missing the cap but I was likely to replace that anyways. No problem with the missing radiator cap, they come with a 16 Lb. cap. A little to much for the old motors. The radiator is built for it but a flathead, I don't think so. DJ Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted March 28, 2019 Report Share Posted March 28, 2019 blow a stock hater core up like a balloon.....its next general application for it would be a piñata.. Quote Link to comment Share on other sites More sharing options...
Young Ed Posted March 28, 2019 Author Report Share Posted March 28, 2019 2 hours ago, DJ194950 said: No problem with the missing radiator cap, they come with a 16 Lb. cap. A little to much for the old motors. The radiator is built for it but a flathead, I don't think so. DJ ya honestly all I would have used the included one for was to match up to a 4lb replacement. Quote Link to comment Share on other sites More sharing options...
Young Ed Posted June 17, 2019 Author Report Share Posted June 17, 2019 (edited) Still haven't gotten the new bed angles but I got started on the flooring Edited June 17, 2019 by Young Ed fix photo 4 Quote Link to comment Share on other sites More sharing options...
Worden18 Posted June 17, 2019 Report Share Posted June 17, 2019 5 hours ago, Young Ed said: Still haven't gotten the new bed angles but I got started on the flooring http://img.photobucket.com/albums/v172/dodgepu1946/my 40 ply pickup/IMG_20190616_153637.jpg Wow those look great!? 1 Quote Link to comment Share on other sites More sharing options...
ggdad1951 Posted June 17, 2019 Report Share Posted June 17, 2019 still using photobucket? Quote Link to comment Share on other sites More sharing options...
Young Ed Posted June 17, 2019 Author Report Share Posted June 17, 2019 31 minutes ago, ggdad1951 said: still using photobucket? yup and apparently it doesn't work too well from my phone. Just got the photo fixed. Quote Link to comment Share on other sites More sharing options...
42halfton Posted June 18, 2019 Report Share Posted June 18, 2019 On 10/3/2015 at 9:07 PM, Young Ed said: To get this back together for the front I'll need new pins and new shackles. The one might be ok but the one shown here is clearly loose until you get right to the last thread. The new one in the picture is a Jeep part that has the same threads but it slightly shorter. Other than the obvious that this will slightly lower the truck is there a reason not to use one of these Jeep ones? They are about 1/4 of the price of the dodge ones. Im new here so just gone right through this thread, really enjoyable, thanks. Any idea what model of Jeep the shackles come from? Im in the UK so they may be easier for me buy them here depending what model they come from. 1 Quote Link to comment Share on other sites More sharing options...
Young Ed Posted June 18, 2019 Author Report Share Posted June 18, 2019 37 minutes ago, 42halfton said: Im new here so just gone right through this thread, really enjoyable, thanks. Any idea what model of Jeep the shackles come from? Im in the UK so they may be easier for me buy them here depending what model they come from. I ordered them from Rockauto I believe and just looked up early 50s jeep. 1 Quote Link to comment Share on other sites More sharing options...
Brent B3B Posted June 20, 2019 Report Share Posted June 20, 2019 On 6/16/2019 at 10:16 PM, Young Ed said: Still haven't gotten the new bed angles but I got started on the flooring Looks awesome! Quote Link to comment Share on other sites More sharing options...
Young Ed Posted June 26, 2019 Author Report Share Posted June 26, 2019 (edited) Now that the big car show is over I'm back to work Edited June 26, 2019 by Young Ed photo 4 Quote Link to comment Share on other sites More sharing options...
Young Ed Posted July 29, 2019 Author Report Share Posted July 29, 2019 Annoying setback yesterday. Mocking up the bed floor I put one bolt in each end of the 5 strips to check for width. I came out a little over so gotta take it back apart. 4 of the 10 carriage bolts wouldn't come apart. Somehow the threads were defective. One bolt and I ended up using a nut splitter on 3 others. The worst is I dinged up the square holes in the strips fighting with these bolts! Quote Link to comment Share on other sites More sharing options...
Dave72dt Posted July 30, 2019 Report Share Posted July 30, 2019 If those were stainless steel bolts, you can expect that. Relatively a common occurrence with stainless, a nut will spin on easily but start to bind on removal occasionally. Anti seize compound is almost a must. Do your mockup work with common steel bolts, then replace with the stainless on final assembly. Quote Link to comment Share on other sites More sharing options...
Young Ed Posted September 8, 2019 Author Report Share Posted September 8, 2019 Box is getting a little closer. Got one angle attached today. Hopefully can get the other one on tomorrow. 1 Quote Link to comment Share on other sites More sharing options...
Young Ed Posted September 8, 2019 Author Report Share Posted September 8, 2019 Part of the delay in this bed is I've been having too much fun with my new "project". However this one doesn't need much. Picked this up end of May and haven't done much other than drive it. I had to replace the battery cables and I swapped to some plymouth division hubcaps. 318 with push button auto and power steering 4 Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted September 8, 2019 Report Share Posted September 8, 2019 18 minutes ago, Young Ed said: Box is getting a little closer. Got one angle attached today. Hopefully can get the other one on tomorrow. Quote Link to comment Share on other sites More sharing options...
greg g Posted September 8, 2019 Report Share Posted September 8, 2019 Nice family truckster! 64 or 65?? Reminds me of my dad's 65 Coronet 500. That was a 318 three speed. Was a nice car. It was a drivered car the only standard in the 4 cars that were supplied to the school. Had 800 miles on it when he got it used. Quote Link to comment Share on other sites More sharing options...
Young Ed Posted September 8, 2019 Author Report Share Posted September 8, 2019 Just now, greg g said: Nice family truckster! 64 or 65?? Reminds me of my dad's 65 Coronet 500. That was a 318 three speed. Was a nice car. It was a drivered car the only standard in the 4 cars that were supplied to the school. Had 800 miles on it when he got it used. 64 Belvedere Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.