DJ194950 Posted October 11, 2016 Report Share Posted October 11, 2016 Imagine those parts are harder to find than a NOS quarter! DJ Quote Link to comment Share on other sites More sharing options...
ggdad1951 Posted October 12, 2016 Report Share Posted October 12, 2016 can't remember if I posted this or not already...but I ran across this a few months back...now I just need the other one! LOL 3 Quote Link to comment Share on other sites More sharing options...
Brent B3B Posted October 12, 2016 Report Share Posted October 12, 2016 (edited) ATA BOY! I found one also but I had to leave it behind Edited October 13, 2016 by Brent B3B 1 Quote Link to comment Share on other sites More sharing options...
48Dodger Posted October 13, 2016 Report Share Posted October 13, 2016 (edited) lol......Nice....that's a Nos sticker there Mark! Glad I could give you guys neutral ground at the BBQ to make the exchange. Just gotta get Brendt to find the other one and do it again in 2017! 48Dodger aka Estrada MotorSports Edited October 13, 2016 by 48dodger Quote Link to comment Share on other sites More sharing options...
ggdad1951 Posted October 13, 2016 Report Share Posted October 13, 2016 18 hours ago, Brent B3B said: ATA BOY! I found one also but I had to leave it behind geeze....I think that's the one I need! DRR! Quote Link to comment Share on other sites More sharing options...
JBNeal Posted October 19, 2016 Report Share Posted October 19, 2016 (edited) NOSpart: 1325984 Valve Grind Gasket Package found this gasket set on eBay years ago Edited August 23, 2021 by JBNeal revised pictures Quote Link to comment Share on other sites More sharing options...
JBNeal Posted October 23, 2016 Report Share Posted October 23, 2016 (edited) NOSpart: 1260731 Speedometer Drive Shaft Found this cable on eBay years ago Edited August 23, 2021 by JBNeal revised picture 1 Quote Link to comment Share on other sites More sharing options...
JBNeal Posted October 26, 2016 Report Share Posted October 26, 2016 (edited) NOSpart: Dipsticks more eBay finds from years ago: these dipsticks even have the felt gaskets that are pristine Edited August 23, 2021 by JBNeal revised pictures 1 Quote Link to comment Share on other sites More sharing options...
_shel_ny Posted October 26, 2016 Report Share Posted October 26, 2016 On 8/16/2016 at 8:14 AM, Dodgeb4ya said: Quite the for sale ad!!! Sneak them and the mods don't notice, even if they respond. Selective eyesight 2 Quote Link to comment Share on other sites More sharing options...
ggdad1951 Posted October 26, 2016 Report Share Posted October 26, 2016 6 hours ago, _shel_ny said: Sneak them and the mods don't notice, even if they respond. Selective eyesight it was noticed.... 1 Quote Link to comment Share on other sites More sharing options...
JBNeal Posted October 27, 2016 Report Share Posted October 27, 2016 (edited) NOSpart: Oil Filler Caps several other eBay finds...the original quality varied: one fill cap had pristine paint but the decal was way crooked; one fill cap had no paint on the bottom but the decal is applied so-so...the NORS cap ain't too shabby Edited August 23, 2021 by JBNeal revised pictures Quote Link to comment Share on other sites More sharing options...
JBNeal Posted October 31, 2016 Report Share Posted October 31, 2016 (edited) NOSpart: 947580 Wheel Cylinder Repair Kit more eBay finds: wheel cylinder repair kits Edited August 23, 2021 by JBNeal revised picture 3 Quote Link to comment Share on other sites More sharing options...
Paul Hatfield Posted November 21, 2016 Author Report Share Posted November 21, 2016 I have been looking for an original water valve for close to two years. Finally found and bought this one, which is NOS as far as I can tell. I probably should have taken a photo before I cleaned the body, but I was just to excited to see how it would look. As you can tell in the photo, I did not clean the linkage portion- yet. 2 Quote Link to comment Share on other sites More sharing options...
Brettwg Posted November 21, 2016 Report Share Posted November 21, 2016 8 hours ago, Paul Hatfield said: I have been looking for an original water valve for close to two years. Finally found and bought this one, which is NOS as far as I can tell. I probably should have taken a photo before I cleaned the body, but I was just to excited to see how it would look. As you can tell in the photo, I did not clean the linkage portion- yet. Nice score! I had that saved in my ebay wish list but had to wait till payday.. Quote Link to comment Share on other sites More sharing options...
ggdad1951 Posted November 22, 2016 Report Share Posted November 22, 2016 21 hours ago, Paul Hatfield said: I have been looking for an original water valve for close to two years. Finally found and bought this one, which is NOS as far as I can tell. I probably should have taken a photo before I cleaned the body, but I was just to excited to see how it would look. As you can tell in the photo, I did not clean the linkage portion- yet. I don't think that's the original stock one. More likely a vintage aftermarket part. The ones in all the pictures are Y shaped. Quote Link to comment Share on other sites More sharing options...
Paul Hatfield Posted November 23, 2016 Author Report Share Posted November 23, 2016 Mark- I'd never want to disagree with you on this, as you have way more experience than me. In my parts book, page 1-7, it clearly shows a photo of the water valve you posted about. It's 1-48-854 in the drawing. However, looking up 1-48-854 on Page 1-17, there are TWO different valves with TWO different part numbers. 135788 & 670647. I swear at one point in my search I saw the style I purchased for sale with it's original Mopar packaging. Anyway, not sure which part # is the Y shaped one you depict, and what the other one looks like, but I do believe at sometime during the production years of our trucks that the valve I purchased may have been used. Thoughts? Ps- still working on the steering wheel from you. I think it will turn out very nice. Paul 4 Quote Link to comment Share on other sites More sharing options...
JBNeal Posted November 23, 2016 Report Share Posted November 23, 2016 (edited) NOSpart: 855452 1139088 Water Pump Bypass Elbows found these water pump bypass elbows on eBay years ago for pennies Edited August 23, 2021 by JBNeal revised picture 1 Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted November 24, 2016 Report Share Posted November 24, 2016 1345788 is the common brass 1949-52 Plymouth, Dodge/Chrysler and DeSoto car heater control valve as Paul has shown above that he purchased NOS. It is used on Dodge trucks too. The very hard to find one is the "Y" type found on dodge trucks with usually the factory fresh air package. That very rare and costly "Y" valve is really used with the 1941-48 MoPar cars with the dual heater and or floor heater installations part # 670647. I to this day don't know why it's used on dodge trucks as they only use one side of the "Y" and plug the other outlet. 1 Quote Link to comment Share on other sites More sharing options...
JBNeal Posted November 24, 2016 Report Share Posted November 24, 2016 Parts shortages sometimes cause OEMs to make do with what they have in stock to get the product out the door..."as long as it works, who cares?" may be what the production supervisor would say on those days 1 Quote Link to comment Share on other sites More sharing options...
ggdad1951 Posted November 24, 2016 Report Share Posted November 24, 2016 On 11/23/2016 at 1:37 PM, Paul Hatfield said: Mark- I'd never want to disagree with you on this, as you have way more experience than me. In my parts book, page 1-7, it clearly shows a photo of the water valve you posted about. It's 1-48-854 in the drawing. However, looking up 1-48-854 on Page 1-17, there are TWO different valves with TWO different part numbers. 135788 & 670647. I swear at one point in my search I saw the style I purchased for sale with it's original Mopar packaging. Anyway, not sure which part # is the Y shaped one you depict, and what the other one looks like, but I do believe at sometime during the production years of our trucks that the valve I purchased may have been used. Thoughts? Ps- still working on the steering wheel from you. I think it will turn out very nice. Paul All I've ever gone off of is the fresh air assembly pic....looks like from other comments you are golden! Learn more every day! 1 Quote Link to comment Share on other sites More sharing options...
Young Ed Posted November 24, 2016 Report Share Posted November 24, 2016 On 11/21/2016 at 9:21 AM, Paul Hatfield said: I have been looking for an original water valve for close to two years. Finally found and bought this one, which is NOS as far as I can tell. I probably should have taken a photo before I cleaned the body, but I was just to excited to see how it would look. As you can tell in the photo, I did not clean the linkage portion- yet. You can get the rubber parts to rebuild it for about $50. Sadly they are expensive because the only place I've found to get them is from a 50s corvette place. Quote Link to comment Share on other sites More sharing options...
JBNeal Posted January 21, 2019 Report Share Posted January 21, 2019 (edited) NOSpart: 957777, 957778 Battery Trays NOS battery trays found on eBay years ago Edited May 1, 2021 by JBNeal updated info Quote Link to comment Share on other sites More sharing options...
JBNeal Posted October 15, 2019 Report Share Posted October 15, 2019 (edited) NOSpart: 1197575 Floor Mat Brad's NOS floor mat Edited May 1, 2021 by JBNeal updated info Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted December 8, 2020 Report Share Posted December 8, 2020 On 10/28/2015 at 1:21 PM, Plymouthy Adams said: Paul..to me..that is the most enjoyable part of any build..the seeking out of parts..and even more so if seeking out he parts involves a few decades into the future and retrofitting to some of my older cars. More than one way to enjoy the hobby...there is no written rule that a date of completion has to be set...let alone met..enjoy the ride even if it is still on blocks in the garage Paul,Plymouthy Adams,I couldn't agree more. I would also add all the GREAT people you get to meet who are happy to share their knowledge,both on places like this board,and in "flesh life",too. This ain't just about cars,it's about people,memories,and history. 1 Quote Link to comment Share on other sites More sharing options...
Eneto-55 Posted January 17, 2021 Report Share Posted January 17, 2021 On 11/27/2014 at 12:46 PM, Young Ed said: I couldn't find a picture of it but I had a 1941 plymouth pickup NOS hood ornament. I've got many other things floating around. NOS special deluxe badges, 4 bumper guards, and both door handles for my 48. A rear view mirror for the 46 pickup too. I know this post was from over 6 years back, but I was wondering if you could confirm that the picture here is a 41 Ply PU hood ornament. (I am not in need of one myself - my cousin.) 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.