Jump to content

Recommended Posts

Posted
7 hours ago, pflaming said:

love that moss!  What do you use to pull a truck that has no brakes?  I have a 2" pipe with a chain pulled through it. Then connect tightly to both the pulling truck and the roller. The pipe provides the brakes, not recommended for a long pull but works great fo short ones. 

 

How about two trucks without brakes? Kidding the yellow one currently has them. The frame with the 2 cabs on it had pretty bad tires so it just stopped when I stopped pulling it.   

Posted

Or drag an old short block behind the 2nd truck. Question, no red or slow moving vehicle flag? 

Posted
39 minutes ago, pflaming said:

Or drag an old short block behind the 2nd truck. Question, no red or slow moving vehicle flag? 

We only towed it that way on our land. The 1 cab was then moved over to the trailer for transport. And while the other drivers probably thought we were going slow we were going the speed limit so no flag needed.

Posted

Bet Paul would just clear coat over the moss to save the Patina if he owned that cab!

DJ

Posted
57 minutes ago, DJ194950 said:

Bet Paul would just clear coat over the moss to save the Patina if he owned that cab!

DJ

I wonder what moss smells like when it is burning? :eek: Can't be a good smell.......that's for sure!

  • Like 1
Posted
22 minutes ago, Plymouthy Adams said:

a rolling Dodge gathers no moss...

And yet 100 miles of 55MPH or higher and none of it came off! 

Posted
3 hours ago, DJ194950 said:

Bet Paul would just clear coat over the moss to save the Patina if he owned that cab!

DJ

more than not would remove it to heat on the manifold while driving for a hot meal IF he arrives at this destination

Posted

I tried to delete this poster which showed up uninvited.

"I wonder what moss smells like when it is burning?" One quickly forgets the smell when the effects are present.

Posted

don't tell him, but I think dodgeb4ya has a moss issue alsomoss.JPG

  • Like 2
Posted

Getting ready

IMG_20160928_172255.jpg

and now almost ready for paint. Still have to cut off the old shock mounts and sand it down

 

IMG_20160928_202215.jpg

Posted
On 9/26/2016 at 7:19 PM, Jeff Balazs said:

I wonder what moss smells like when it is burning? :eek: Can't be a good smell.......that's for sure!

I don't know about moss but I know a candle flame smells just like burnt nose hair.

  • Like 1
Posted

Got the cab floor somewhat cleaned up today. Still need to go after the hard to get spots along the edges

IMG_20161002_174311.jpg

 

Only discovered 1 bad area.

IMG_20161002_174319.jpg

  • Like 3
Posted

IMG_20161005_202033.jpg

 

and got these spacers to fill in between the spring bolt and the new axle pads

IMG_20161004_185604.jpg

Posted

Why didn't you paint the innser side of the backer plate?

Posted
2 hours ago, ggdad1951 said:

Why didn't you paint the innser side of the backer plate?

Possibly replacing them with 10" ones for bigger brakes.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use