FlashBuddy Posted March 13, 2019 Author Report Share Posted March 13, 2019 Oh, I like the black with shiny bolts. Quote Link to comment Share on other sites More sharing options...
Dodgeed Posted March 13, 2019 Report Share Posted March 13, 2019 9 hours ago, FlashBuddy said: Oh, I like the black with shiny bolts. I assume you meant the back bumper? However, looking at his two trucks from this angle, its the first time I've noticed that the cabs have really pretty much stayed the same from the 1930's up to the early 1950's. Could there really be such a slow evolution that the cab is just about what it was, for almost two decades? Quote Link to comment Share on other sites More sharing options...
Merle Coggins Posted March 13, 2019 Report Share Posted March 13, 2019 The red and black one is Ed's '46 Dodge. The other one is an International. The cabs did change considerably in '48 with the introduction of the B-Series. They got wider for one thing. Then the added rear corner windows (opitonal) for increased visibility. Quote Link to comment Share on other sites More sharing options...
Young Ed Posted March 13, 2019 Report Share Posted March 13, 2019 5 minutes ago, Merle Coggins said: The red and black one is Ed's '46 Dodge. The other one is an International. The cabs did change considerably in '48 with the introduction of the B-Series. They got wider for one thing. Then the added rear corner windows (opitonal) for increased visibility. Thanks Merle yes the green truck is Dads 54 International R110. If you look close you can also see the back end of the 66 Fury Wagon. We were at my sisters house putting those trucks to work! Quote Link to comment Share on other sites More sharing options...
kendall Posted March 15, 2019 Report Share Posted March 15, 2019 I've pushed my license pl'hate' under my bumper and will slide it out only prior to the cuffs being slapped on me.True story; When I was 16, I replaced my '65' Comet rear bumper with a painted pan and did not want to ruin the 'look' with a plate. I fabricated a bracket for the plate inside my rear window along with flashlight illumination. A few nights later, the 'law' takes notice! I'm dodging a cop's spotlight but he's just far enough away where I try to lose him around suburban streets. Every corner I hightail around, he's close behind with that damn blinding spotlight in my rearview mirror. Defeated, I pull over and expect the worst. No cop, only my own flashlight that had come loose from the bracket and was slapping around my rear window at every corner. Went legal the next morning. 2 Quote Link to comment Share on other sites More sharing options...
Dodgeed Posted March 15, 2019 Report Share Posted March 15, 2019 On 3/13/2019 at 8:26 AM, Merle Coggins said: The red and black one is Ed's '46 Dodge. The other one is an International. The cabs did change considerably in '48 with the introduction of the B-Series. They got wider for one thing. Then the added rear corner windows (opitonal) for increased visibility. While not realizing that the other one was an International, I guess my comment still applies, generally, to all pickup trucks from the late 1930's to the late 1940's/early 1950's. I guess just the basic design of cab & load box doesn't leave much room for innovative or dynamic design differences. ? Quote Link to comment Share on other sites More sharing options...
FlashBuddy Posted September 20, 2019 Author Report Share Posted September 20, 2019 (edited) Had Fort Collin's oldest glass shop, Blacks Glass, use my original windshield plates for templates and provided me with perfect matching new glass pieces. With my wife and son in the cab holding the glass and rubber up to the cab cutout, I managed to use the rope trick to pull the rubber seal over the outside flange. The rope was going to tear my seal in the corners so I used a plastic piece to coax it along. with new glass I am no longer blinded when driving into a sunrise or sunset. That old glass was so pitted it made for blinding glare when facing into the sun, or headlights on the highway. Also nice was getting the trim pieces cleaned up and repainted. Finally getting around to replacing the various rubber bits 'n strips. I found a box of rubber trim pieces on Facebook Marketplace for $200. Negotiated down to $100 ☺️ I was told they should fit a '50 Dodge truck. Also in the box was a new floormat and pad. The floormat was a perfect fit. There also were two rubber pads that fit the toor handles, what looks like rear and corner window seals, window channels et. One long rubber strip looks to be suitable for the door opening in the cab so that will go on next. Notice last owner resprayed onto the door rubber, along with other rubbers here and there. Edited September 20, 2019 by FlashBuddy 1 Quote Link to comment Share on other sites More sharing options...
ggdad1951 Posted September 20, 2019 Report Share Posted September 20, 2019 review the video I have posted on the door seals, should help you get it set up right, or at least the right direction for you B1/2 (video for B3/4). Quote Link to comment Share on other sites More sharing options...
FlashBuddy Posted September 22, 2019 Author Report Share Posted September 22, 2019 Great tip and video. For others the video is here > I looked at a lot of door seals today trying to figure how to glue them on and still just winged it. Masking tape works great at holding them in place while the glue dries. I only did the driver's side so I'll get another chance if I did 'em backwards. Quote Link to comment Share on other sites More sharing options...
FlashBuddy Posted March 20, 2020 Author Report Share Posted March 20, 2020 (edited) Got new rubber seals glued on, awesome. Moving right along, got both the passenger and driver's door glass replaced. Those little clips attaching the glass bottom bracket to the mechanism were a mystery since you can't see them or how they attach, but Alec came over and showed me the light. My box-o-seals had window channel and sweeps - got the channel in but not a fan of the sweeps and may buy new from VPW. Taking a break but in the meantime found some hand forged tie down hooks for $8 each - pretty stoked. Edited March 20, 2020 by FlashBuddy 2 Quote Link to comment Share on other sites More sharing options...
minicooper Posted March 21, 2020 Report Share Posted March 21, 2020 Those are really cool! -Roland 1 Quote Link to comment Share on other sites More sharing options...
bkahler Posted March 22, 2020 Report Share Posted March 22, 2020 On 3/19/2020 at 10:03 PM, FlashBuddy said: Got new rubber seals glued on, awesome. Moving right along, got both the passenger and driver's door glass replaced. Those little clips attaching the glass bottom bracket to the mechanism were a mystery since you can't see them or how they attach, but Alec came over and showed me the light. My box-o-seals had window channel and sweeps - got the channel in but not a fan of the sweeps and may buy new from VPW. Taking a break but in the meantime found some hand forged tie down hooks for $8 each - pretty stoked. If you don't mind my asking, where'd you find those hooks?! Brad 1 Quote Link to comment Share on other sites More sharing options...
FlashBuddy Posted March 22, 2020 Author Report Share Posted March 22, 2020 Garrett Wade. Looks to be mostly wood working tools. https://www.garrettwade.com/hand-forged-iron-wall-hooks.html I ordered the medium sized. Product 89A05.06. They had a promotion where you also get a free utility led flashlight. Be sure to request that 2 Quote Link to comment Share on other sites More sharing options...
bkahler Posted March 22, 2020 Report Share Posted March 22, 2020 1 hour ago, FlashBuddy said: Garrett Wade. Looks to be mostly wood working tools. https://www.garrettwade.com/hand-forged-iron-wall-hooks.html I ordered the medium sized. Product 89A05.06. They had a promotion where you also get a free utility led flashlight. Be sure to request that Thanks for the link. Now to decide if I should order or not! Brad Quote Link to comment Share on other sites More sharing options...
FlashBuddy Posted March 23, 2020 Author Report Share Posted March 23, 2020 FWIW, the free LED flashlight is awesome! Machined aluminum, 1AA batteries. Bright as the sun! It now lives in my road toolbox. Quote Link to comment Share on other sites More sharing options...
FlashBuddy Posted April 3, 2020 Author Report Share Posted April 3, 2020 Decided against the hand forged wrought iron hooks from Garrett Wade (India). Steve over at VPW hooked me up with the hooks I've only dreamed of. Ordered an interior kit from Vic's Dodge Garage. He's doing original style; CNC cut panels covered as in the old days. While I'm very nervous about sag going forward, I did like that I could mix and match colors. Going with grey headliner with brown panels. I saw somebody else had done this and thought it looked nice. His cost is misleading. While $425.00 sounds like a deal, when you factor in his shipping it get nuts. Good thing I'm rich. Here's the shipping quotes from Vic's in Oregon to me in Fort Collins, Colorado. I've been leary of doing ABS, while I would appreciate the no sag factor, I just don't think I'd like having a plastic interior. I think I'll get better sound insulation with the old school vinyl wrapped boards. Yes, I've added sticky backed foam/aluminum sound deadener sheets up the wazoo. Finger's crossed! FWIW - Vic is a chatty guy who was incredibly helpful on the phone over a wide range of topics. And did I mention Vic's website has color photos? Quote Link to comment Share on other sites More sharing options...
Young Ed Posted April 4, 2020 Report Share Posted April 4, 2020 I've heard if you seal the backside of the panels the moisture won't get to them and make them sag Quote Link to comment Share on other sites More sharing options...
FlashBuddy Posted April 4, 2020 Author Report Share Posted April 4, 2020 That is a good tip. I'll be sure to do that. Vic explained that my living in Colorado would eliminate that issue, which is likely true most of the time, but not all of the time. I'll let 'em dry out then spray on some kind of sealer. Quote Link to comment Share on other sites More sharing options...
Lingle Posted April 7, 2020 Report Share Posted April 7, 2020 wow those shipping costs are steep, I wonder if there is a Fastenal nearby that would be more economical? I sent an engine/transmission from my 51 from Waterloo, IA to Kansas somewhere and it was <$200 for shipping, and we all know the weight of the powertrain. Only downside is there is no tracking nor insurance and it takes ~10 days to ship, but that is anywhere in the US. 1 Quote Link to comment Share on other sites More sharing options...
FlashBuddy Posted November 26, 2021 Author Report Share Posted November 26, 2021 On 1/26/2018 at 1:28 PM, Merle Coggins said: You found Acme thread bolts at your local Ace? Yes I did! Months later I went back to purchase a few more and the nut and bolt isle expert just gave me a blank stare. Go figure?! Quote Link to comment Share on other sites More sharing options...
billrigsby Posted November 26, 2021 Report Share Posted November 26, 2021 On 4/3/2020 at 12:07 PM, FlashBuddy said: Ordered an interior kit from Vic's Dodge Garage. He's doing original style; CNC cut panels covered as in the old days. While I'm very nervous about sag going forward, I did like that I could mix and match colors. Going with grey headliner with brown panels. I saw somebody else had done this and thought it looked nice. His cost is misleading. While $425.00 sounds like a deal, when you factor in his shipping it get nuts. Good thing I'm rich. Here's the shipping quotes from Vic's in Oregon to me in Fort Collins, Colorado. Curious what the shipping costs were, I'm 'just down the road' from you, looks like the attachment is not valid anymore? Quote Link to comment Share on other sites More sharing options...
FlashBuddy Posted November 26, 2021 Author Report Share Posted November 26, 2021 1 hour ago, billrigsby said: Curious what the shipping costs were, I'm 'just down the road' from you, looks like the attachment is not valid anymore? Awwww, dangit. I can't find that receipt. I remember Vic sent me a list of shippers and their costs then let me pick one. Give Vic a call. He's a chatty helpful fellow. Phone: (541) 231-2237 Email: email:info@vicsdodgegarage.com Quote Link to comment Share on other sites More sharing options...
FlashBuddy Posted January 5, 2023 Author Report Share Posted January 5, 2023 Oooooh, long time no edit. Fast forward to January 2023! Got the rust off. All new glass. Repainted the interior the original gray. Laid down foam backed aluminum insulation. Installed new headliner and kick panels that I purchased from Vic's Dodge Garage; before he retired. Put in the new floormat I had previously scored. Reupholstered the interior. Found a Mopar radio in the junk yard and with the help of a friend rebuilt it; new tubes etc. It actually works! While I love the "patina", I'm giving some serious thought to re-doing the bed and painting her black. This will have to wait since I'm currently traveling the country via RV and Roxanne is in storage. 1 Quote Link to comment Share on other sites More sharing options...
dcotant Posted January 12, 2023 Report Share Posted January 12, 2023 On 6/17/2018 at 7:11 AM, Merle Coggins said: Go to the hardware store and get a piece of 5/16 key stock. Then either use a Crescent wrench on it, or bend a 90 on one end and make it into a wrench I know i am way late on commenting, but i found it oddly satisfying that you can use the key stock from the axle to do this job as well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.