Barry Maxwell Posted March 23, 2015 Report Posted March 23, 2015 To All: Because of the cold weather, snow, and ice during the past several months, I spent more time in my shop working on the restoration of my '51 B3C truck than any previous winter, and I made substantial progress. I installed the RI Wiring harnesses and, much to my pleasant surprise, everything worked!! I brought in Safelite to install the front and rear window glass, including the curved rear corner windows - which were a real "bear". I am sure that those two guys will never want to come back for another job. Next, I installed the running boards, spotlight, hub caps steering wheel and horn ring, and a number of other minor parts. All in all, I has been a good winter despite the bad weather. My next project is to install the innards and glass of the doors. As shown in one of the attachments, that will be a real jig saw puzzle. I am sure that the Shop Manual will be helpful, but is there any other install help that I should be aware of? Barry 3 Quote
Brent B3B Posted March 23, 2015 Report Posted March 23, 2015 that looks awesome Barry! love the detail. hey it looks like your horn might have shrunk Quote
Barry Maxwell Posted March 23, 2015 Author Report Posted March 23, 2015 that looks awesome Barry! love the detail. hey it looks like your horn might have shrunk They are dual horns that came with the truck and I decided to keep them. When they blow they really get your attention! Quote
Brent B3B Posted March 23, 2015 Report Posted March 23, 2015 They are dual horns that came with the truck and I decided to keep them. When they blow they really get your attention! i'll bet they do, i like them..... and i can't help but just stare at that horn ring Quote
Barry Maxwell Posted March 23, 2015 Author Report Posted March 23, 2015 i'll bet they do, i like them..... and i can't help but just stare at that horn ring I had the horn ring and hood ornament chromed. Cost me an arm and a leg. Won't do that again. Quote
morgoon52 Posted March 23, 2015 Report Posted March 23, 2015 That is a lot of hard work right there...looks great! Quote
wallytoo Posted March 24, 2015 Report Posted March 24, 2015 truck looks outstanding. i'm sure you can't wait to drive it. Quote
Jeff Balazs Posted March 24, 2015 Report Posted March 24, 2015 Really really nice Barry. It isn't all that hard to put the glass in the doors. If it were me I would hang the door. I did it that way and I think it is must be easier than with them laying down. Jeff Quote
Desotodav Posted March 24, 2015 Report Posted March 24, 2015 Really really nice Barry. It isn't all that hard to put the glass in the doors. If it were me I would hang the door. I did it that way and I think it is must be easier than with them laying down. Jeff x 2 on Jeff's comments. Look forward to seeing it on the road. Quote
TrampSteer Posted March 24, 2015 Report Posted March 24, 2015 Man, I want the workshop! Nice place for a nice job. Quote
ruff1148kr Posted March 24, 2015 Report Posted March 24, 2015 great first class job! take plenty of pics of how you do the door glass LOL I have been dreading it . Will need all the reference I can get my hands on when I tackle it. Once again Let me say you have to be proud of what you have accomplished. Quote
48Dodger Posted March 24, 2015 Report Posted March 24, 2015 Nice looking ride ya got there!!! 48D Quote
pflaming Posted March 24, 2015 Report Posted March 24, 2015 While I enjoy what I'm doing, I envy those with the energy and skill to do what you have accomplished. That is a beauty! Well done. Congratulations! Quote
Mark D Posted March 24, 2015 Report Posted March 24, 2015 Beautiful job! Love to have you join our little forum gathering in Hyde Park NY in August. You have the newest old truck in attendance. Quote
Barry Maxwell Posted March 25, 2015 Author Report Posted March 25, 2015 Really really nice Barry. It isn't all that hard to put the glass in the doors. If it were me I would hang the door. I did it that way and I think it is must be easier than with them laying down. Jeff Desotodav also agrees with Jeff that it is easier with the door installed. Do others agree? Since my doors are completely empty, I really never thought of installing the innards with the door installed. I just assumed that it would be easier with it in the horizontal position. Looks like I may have to rethink my approach. Thoughts?? Barry P.S. Thank you all for the nice comments. I really appreciate them. Helps make it all worthwhile. Quote
Jeff Balazs Posted March 25, 2015 Report Posted March 25, 2015 Barry.....you could just mount them to a post or wall or something. My thought is that it is easier to work on them in the upright position. Ideally at a height you don't have to bend over too much. Jeff Quote
Dave72dt Posted March 25, 2015 Report Posted March 25, 2015 Instead of mounting them to the wall, mount them to the cab and set your gaps first. Still an ideal work height, access to both sides and they're lighter without the glass and regulators and less likely to scratch the pretty side than you would laying them on their back. 1 Quote
Desotodav Posted March 25, 2015 Report Posted March 25, 2015 I had to strip the right door on the blue truck a couple of years back when the Upholsterer left me with an $800 dent in the door. It sure was much easier stripping the door internals whilst the door was still on the truck. I had the door back on the truck (after repair) when I re-installed the inner workings and glass for both ease of working position and fear of damage to paint. It took 8 months of chasing up the Upholsterer to get him to pay me back the $800 that I paid out for the door repair work - needless to say that I will not be back to that Upholsterer! Keep up the good work Barry. Quote
Barry Maxwell Posted March 27, 2015 Author Report Posted March 27, 2015 To All: Jeff and Desotodav certainly had the right idea when they suggested that I install the door on the cab before putting the glass and mechanicals in. My wife and I have since installed both doors and door check brackets, despite my bad back. I can't imagine how much more difficult it would have been on my back if I had put everything back in the doors while in the horizontal position, and then tried to install a much heavier door. Excellent suggestion guys!! When I removed the doors several years ago, I drilled 1/4" holes in the center of the four hinge brackets in order to recover the exact alignment when I reinstalled them. It worked like a charm! Now, all I have to do is figure out how and in what order to install the glass and mechanicals. I am sure I will figure something out. Thanks again guys. Barry Quote
ggdad1951 Posted March 27, 2015 Report Posted March 27, 2015 my order: door latch mechanism window regulator glass Quote
Barry Maxwell Posted March 27, 2015 Author Report Posted March 27, 2015 my order: door latch mechanism window regulator glass Thanks Mark. Will follow that order. Quote
Barry Maxwell Posted April 22, 2015 Author Report Posted April 22, 2015 To All: Well, I scored another minor success in installing the glass and mechanicals in one door! After reading all I cold find on the subject, I finally (through trial and error) figured out the sequencing procedure for all the components (jamb mechanism, regulator, vent window, front channel, glass run, circular retainer clips, fuzzy strip, rubber bumpers, etc., etc.). I learned that it is helpful to install the clips with the help of a mirror and string light. I also learned that the fuzzy strip and bumpers can be installed after the glass is in, but thin fingers are helpful. In any event, since the passenger door is complete, the other door should be much easier (famous last words). If I have done it correctly, there should be a photo of the door attached. Barry 1 Quote
Merle Coggins Posted April 23, 2015 Report Posted April 23, 2015 S-U-C-C-E-S-S!!! Atta Boy Barry. You'll be out cruising in no time. Merle 1 Quote
ggdad1951 Posted April 23, 2015 Report Posted April 23, 2015 Oddly, I just went thru the reverse of that procedure to get the latch mechanism out of a door for some guy... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.