Jim Yergin Posted December 13, 2010 Report Posted December 13, 2010 Can I see a pic of what any of you used to pull the water distribution tube? Here's what I used. Jim Yergin Quote
old stovebolt Posted December 13, 2010 Report Posted December 13, 2010 Is that "Rosebud" in the background???? Quote
Jim Yergin Posted December 13, 2010 Report Posted December 13, 2010 Is that "Rosebud" in the background???? Good eyesight. Actually it says "Sam" (our first born). Jim Yergin Quote
Jerry Roberts Posted January 17, 2011 Report Posted January 17, 2011 Heres a couple more pics of that vice and a couple others I have. There was some discussion of vises with a rear jaw that swivels , here is a photo of mine in action . Quote
Big_John Posted January 17, 2011 Report Posted January 17, 2011 There was some discussion of vises with a rear jaw that swivels , here is a photo of mine in action . I have that same vise! Quote
Dodgeb4ya Posted January 17, 2011 Report Posted January 17, 2011 There was some discussion of vises with a rear jaw that swivels , here is a photo of mine in action .Oh I really like that vise Jerry! I will give you $50.00? Please? Bob Quote
Jerry Roberts Posted January 17, 2011 Report Posted January 17, 2011 There was some discussion of vises with a rear jaw that swivels , here is a photo of mine in action .Oh I really like that vise Jerry! I will give you $50.00? Please? Bob Bob , It is on ebay right now . See item 330519939758 . I also have a Rock Island vise for sale ( not on the bay yet ) 4 1/2 inch wide jaws , about 60 pounds . stationary base . $125 . Quote
Tom Skinner Posted January 18, 2011 Report Posted January 18, 2011 I nabbed these babies last week on ebay. A complete Fluid Drive Kit for 1942-1949 Chryslers. All Miller Tools. The Box they came in was Rusty so I'm getting it Sand Blasted to repaint and Felt the Drawer 2 Quote
knuckleharley Posted January 18, 2011 Report Posted January 18, 2011 I have the matching engine analyzer and the starter/generator tester,too. I even have the device you stick up a tailpipe to check the exhaust. I couldn't find a photo of one of my handiest tools,my 10,000 lb diesel loader with the big bucket that will pick 3500 lbs 10 feet up in the air. Tools just don't get any handier than that thing when you are pulling engines and transmissions out of junkers out in the yard and then loading them on a trailer to haul to the crusher. 1 Quote
old stovebolt Posted January 18, 2011 Report Posted January 18, 2011 I nabbed these babies last week on ebay.A complete Fluid Drive Kit for 1942-1949 Chryslers. All Miller Tools. The Box they came in was Rusty so I'm getting it Sand Blasted to repaint and Felt the Drawer nice find..... Quote
james curl Posted July 15, 2011 Report Posted July 15, 2011 Tim Adams, I haven't seen an on car wheel balancer since I was in High School. Our local Chrysler/Plymouth dealer had one and we used to balance our wheels and tires on the car. When done right the ride was much smoother than just balancing the wheel and tire off of the car as the whole rotating assembly got balanced. Quote
P-12 Tommy Posted July 15, 2011 Report Posted July 15, 2011 The old bubble balancer was a piece-o-crap. But at one time that was all ya had. Tom Quote
Plymouthy Adams Posted July 16, 2011 Report Posted July 16, 2011 I have used the bubble balancerto smooth out tires that the electronic balancers could not..in that I will not say the ride they had was not smooth but at two point there was usually a harmonic vibration felt at two more common speeds..usuall between the 42 and 45 MPH and again at 72-75 with the electronic balancers..properly used the 4 weight static balance as done on a "quality" bubble balancer is hard to beat..i use my Micro brand all the time..it is even sensitive enough that you can balance a rim without a tire mounted.. Quote
mrwrstory Posted July 16, 2011 Report Posted July 16, 2011 Scored last weekend at The Long Beach Swap. Quote
Plymouthy Adams Posted July 16, 2011 Report Posted July 16, 2011 I have one of them..used it to punch holes in bonding straps Quote
Young Ed Posted July 21, 2011 Report Posted July 21, 2011 No photos yet but I just won(bought) 3/8 to 5/8 snap on flare fitting wrenches off ebay. The 3/8s 7/16s is a combo the 1/2 9/16 5/8 are individual. Quote
Don Coatney Posted July 22, 2011 Author Report Posted July 22, 2011 No photos yet but I just won(bought) 3/8 to 5/8 snap on flare fitting wrenches off ebay. The 3/8s 7/16s is a combo the 1/2 9/16 5/8 are individual. Flare fitting wrenches or tubing wrenches? If you dont mind me asking what are these wrenches worth today? Quote
Young Ed Posted July 22, 2011 Report Posted July 22, 2011 I paid about $40 bucks for the 4 wrenches. These are the ones I got except my 3/8s and 7/16s are a double ended wrench. http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=274&group_ID=571&store=snapon-store&dir=catalog Quote
Young Ed Posted July 22, 2011 Report Posted July 22, 2011 You got a good deal. They looked good in the pictures hopefully when they get here they haven't been abused. As long as you only use them for brass flare fittings as intended they should last forever. I was going to buy new ones from Craftsman but they don't make the single ones with the extra think open end. Quote
Don Coatney Posted July 22, 2011 Author Report Posted July 22, 2011 They looked good in the pictures hopefully when they get here they haven't been abused. As long as you only use them for brass flare fittings as intended they should last forever. I was going to buy new ones from Craftsman but they don't make the single ones with the extra think open end. I used such tools on the brake and fuel lines on my car and the only brass fitting I recall is the "T" in my fuel line. Everything else was steel fittings with the exception of the carburetor vacuum advance stuff.. Quote
Cpt.Fred Posted July 22, 2011 Report Posted July 22, 2011 i used the same t-fittings on my car... makes you wonder if they don't fabricate anything that looks a little less modern. same problem with hose clamps: nobody has decent looking ones any more! i'm really glad i still have a lot of the original ones on my car, but i wish i had more of them. next thing i do is change the fuel hoses to metal lines like on your photo, don. did you add coils for flexibility to allow the engine to move? Quote
Don Coatney Posted July 22, 2011 Author Report Posted July 22, 2011 don. did you add coils for flexibility to allow the engine to move? I am using a mechanical fuel pump connected to the engine block. No need for flexibility coils as the fuel line moves with the engine. Quote
Cpt.Fred Posted July 22, 2011 Report Posted July 22, 2011 oh, right... i dropped the pump on mine and my fuel support runs across the fire wall behind the engine. Quote
Young Ed Posted July 22, 2011 Report Posted July 22, 2011 I used such tools on the brake and fuel lines on my car and the only brass fitting I recall is the "T" in my fuel line. Everything else was steel fittings with the exception of the carburetor vacuum advance stuff.. Aren't the fittings in/at the carb brass? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.