Jipjob Posted September 4, 2016 Report Share Posted September 4, 2016 Does anyone here know what the proper brake shoe material thickness should be for a 42 Dodge? Or something around that errear? Really need the correct thickness. Thanks Jon Quote Link to comment Share on other sites More sharing options...
TodFitch Posted September 4, 2016 Report Share Posted September 4, 2016 Plymouth used 13/64 inch thick linings for the service brakes for all models from 36 through 42. (Hand brake used 5/32 inch thick linings.) With centralized engineering at Chrysler, it would not surprise me if Dodge was the same. Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted September 4, 2016 Report Share Posted September 4, 2016 .200 Quote Link to comment Share on other sites More sharing options...
grady hawkins Posted September 4, 2016 Report Share Posted September 4, 2016 .200 is what my Chilton list When I had my shoes relined they put a thicker lining on the shoes and I could not get the drums back on!! Quote Link to comment Share on other sites More sharing options...
suntennis Posted September 4, 2016 Report Share Posted September 4, 2016 There is oversize lining to be used for brake drums that have been turned or enlarged. This extra material should work for drums machined out to the safety limits of the drum which I recall is about 0.060 inches from new. What should be done is get the lining arched so that it matches the shape of your drum. There are places that do this and by doing it your brakes should fit and work better. 1 Quote Link to comment Share on other sites More sharing options...
desoto1939 Posted September 4, 2016 Report Share Posted September 4, 2016 JibJob: according to my wagner Brake catalog the 42 Dodge using the lining number 1162 the same as my 39 Desoto. Do you have riveted lining. If so I have several sets with rivets. 3/16 thickness rich hartung Desoto1939@aol.com Quote Link to comment Share on other sites More sharing options...
JIPJOBXX Posted April 30, 2018 Report Share Posted April 30, 2018 What size would be an oversized brake shoe material for my Dodge? Jon present size is .200” my brake hub on the front has been machined out to clean up braking surface. It’s within the factory specifications. Thanks Jon Quote Link to comment Share on other sites More sharing options...
JIPJOBXX Posted April 30, 2018 Report Share Posted April 30, 2018 And where can I get shoes arced in the Seattle area. Jon Quote Link to comment Share on other sites More sharing options...
TodFitch Posted April 30, 2018 Report Share Posted April 30, 2018 4 hours ago, JIPJOBXX said: And where can I get shoes arced in the Seattle area. Jon Maybe in your own garage. I ended up getting a roll of sticky back sand paper from my local hardware store. For each drum I cut a length of paper long enough to fit around the inside diameter and stuck it to the inside of the drum. Then I took the shoes for that drum, marked them up with a felt tip marker so I could see progress and rubbed them against the sandpaper until the marks were sanded off and the shoe(s) fit the drum. Made a big improvement on the feel of the brake pedal and the stopping distance. After that I got access to a shoe arcing machine but haven't bothered to use that as the hand sanded fit has been adequate even though the thickness of the sanding paper was more than the spec for matching the drum diameter so the fit was not as good as a machine could have done. Quote Link to comment Share on other sites More sharing options...
55 Fargo Posted April 30, 2018 Report Share Posted April 30, 2018 Yes arcing in the old days immediate great brakes and stopping. If not arced new shoe lining to take some miles to wear in with periodic minor adjustments. Takes longer but does work or did for me a couple of times. Quote Link to comment Share on other sites More sharing options...
desoto1939 Posted April 30, 2018 Report Share Posted April 30, 2018 According to my wagner brake lining catalog the thickness is 3/16. Rich Hartung desoto1939@aol.com Quote Link to comment Share on other sites More sharing options...
keithb7 Posted May 1, 2018 Report Share Posted May 1, 2018 I'm kind of confused. Are @Jipjob and @JIPJOBXX one in the same person? Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted May 1, 2018 Report Share Posted May 1, 2018 Brake and Clutch Supply... Down town Seattle on 6th, Tacoma or Everett... Huge company. Quote Link to comment Share on other sites More sharing options...
JIPJOBXX Posted May 1, 2018 Report Share Posted May 1, 2018 Yes same old guy! My grandson caught this monster fish last weekend! What a catch! My wife is a very devoted Christian lady and she prayed for our little fishing adventure and god paid oft big time! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.