nkeiser Posted July 16, 2020 Report Posted July 16, 2020 8 hours ago, kencombs said: No image here??? Odd, it shows up on this end. Here's a smaller version that hopefully loads. Quote
kencombs Posted July 17, 2020 Report Posted July 17, 2020 thanks I see that one and it's really nice! Quote
tanda62 Posted July 17, 2020 Author Report Posted July 17, 2020 Your bed looks great, all the knots really add character. Quote
Emmy41 Posted July 22, 2020 Report Posted July 22, 2020 I used ash from a local sawmill, which is very scarce here in Ohio from the emerald ash borer. I figured if it's good for making baseball bats, it's probably pretty durable for my truck bed. I used several Cotes of Tung oil, but before I did that I used one of those big propane tank torches and scorched the wood. It really brought the grain out visually. The research I did told me this process was an ancient Asian technique for preserving wood. Since my truck used to be a fire Dept brush truck I thought it fitting, plus I actually use my truck to haul whatever.....lumber, mulch, firewood, groceries, etc. Best part is if the finish need recoted, just clean and apply. Lemme see if I have a pic.....if not I'll edit it later and add it tomorrow. Quote
tanda62 Posted July 22, 2020 Author Report Posted July 22, 2020 That is a sharp looking bed! I am also jealous of that tailgate with the raised lettering - mine doesn't have that option it is just plain. Quote
JBNeal Posted July 22, 2020 Report Posted July 22, 2020 FYI the stamped lettering on the tailgate was standard up into the early 70s, when it went away and was replaced by a vinyl decal... Quote
tanda62 Posted July 22, 2020 Author Report Posted July 22, 2020 That is interesting. Makes me wonder if my tailgate has been replaced at some point and is not the original. Quote
Young Ed Posted July 22, 2020 Report Posted July 22, 2020 From what I recall a plain gate was an option. We had one 39-47 Dodge that came with a plain gate. It was clearly original Quote
Emmy41 Posted July 23, 2020 Report Posted July 23, 2020 By clearly original, do you mean it showed it's age? These trucks got used a lot, the beds are super hard to find without a ton of dents and even metal stretching from being overloaded, it took parts from several beds to make one in my case. I had to cut front stake pockets off one set of bedsides, flip them and modify to replace my rear stake pockets. I was never going to get my tailgate straight! Which is ok with me, mine gets used and I'm not worried about scratching the paint or bed wood. I love to look at the total restorations, just not what I wanted for myself. Quote
48Dodger Posted July 23, 2020 Report Posted July 23, 2020 Sometimes the tailgate gets beat up so bad that the piece that is used in the front of the bed, can double as the sheet metal for the tailgate. Doesn't take a lot to put it together. Farmers are master shade-tree mechanic body-men. 48D Quote
nkeiser Posted July 23, 2020 Report Posted July 23, 2020 On 7/22/2020 at 6:50 AM, Emmy41 said: I used ash from a local sawmill, which is very scarce here in Ohio from the emerald ash borer. I figured if it's good for making baseball bats, it's probably pretty durable for my truck bed. I used several Cotes of Tung oil, but before I did that I used one of those big propane tank torches and scorched the wood. It really brought the grain out visually. The research I did told me this process was an ancient Asian technique for preserving wood. Since my truck used to be a fire Dept brush truck I thought it fitting, plus I actually use my truck to haul whatever.....lumber, mulch, firewood, groceries, etc. Best part is if the finish need recoted, just clean and apply. Lemme see if I have a pic.....if not I'll edit it later and add it tomorrow. That's a nice looking bed! The ash will definitely be more durable than my cedar. This is the first time I've used tung oil but really like how it turned out. My wood working buddy that helped me plane it down suggested it. Quote
ggdad1951 Posted July 24, 2020 Report Posted July 24, 2020 On 7/22/2020 at 3:31 PM, Emmy41 said: The repops are plain I believe..... You can get plain or embosseed...just more $$ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.