hurnleft Posted November 14, 2018 Report Posted November 14, 2018 Hi all, I've had my RHD P15 Desoto on the road for a while now but having the original brakes and a worn steering box is no fun in today's traffic (although they have been adjusted as well as possible) so radical change is needed. I've had a Jaguar front suspension / power steering set up on a truck so time ago and it drove very nicely and was easy to park so this is my plan for an improved enjoyment of the car. My question is, has anyone done this conversion before and if so do they have advice and photos on how the work went? Thanks, Bob. Quote
Plymouthy Adams Posted November 14, 2018 Report Posted November 14, 2018 this front clip along with just about any other clip out there in this general format will require extensive forward frame modification before any of the Jaguar, FMJ, Crown Vic, Fatman etc etc can be considered.....looking at the front frame spring pockets will be all you need to realize this truth...often the cost of aftermarket rails run to the tune of 600.00 not counting S&H and install. It does not need to run that high granted, but the work will need be done. A simpler all in one later model Mopar clip will get you there faster but then it will not be your Jaguar set up.... Quote
Andydodge Posted November 14, 2018 Report Posted November 14, 2018 XJ6 Jag front suspensions are a common install in late 30's 40's Frods and pickup trucks here in Oz, have been for at least 20yrs, however they need a pair of straight chassis rails which Frods etc have but independant suspended mopars do not and as mentioned will require serious frame modification, if you are capable of this chassis work then the Jag front end offers a very good upgrade...........andyd Quote
hurnleft Posted November 15, 2018 Author Report Posted November 15, 2018 Thanks guys, We picked up an XJS front end last night for which I'll start collecting the rebuild parts and get the hubs re-drilled so I can keep the standard wheels. I've a very clever fabricator/mechanic who will do the work, He's done similar jobs before for me and others and is more than capable. We know it's a big job and the car will (hopefully) look no different when it's done in spite of having spent quite a bit of money, but that's the idea, making a great looking car nicer to drive. Bob. 2 Quote
Frank Elder Posted November 15, 2018 Report Posted November 15, 2018 Nice car, it’s not very often that we get to see the De Soto version of the P-15, good luck in your endeavors. Quote
Andydodge Posted November 15, 2018 Report Posted November 15, 2018 Hurnleft.........from the number plate I assume you are in England? and as its a South African car is it RHD?..........I had a South African 1941 Plymouth Coupe, factory Detroit Export RHD assembled in Sth Africa.............do you have access to production numbers in South Africa?............regards, andyd Quote
hurnleft Posted November 15, 2018 Author Report Posted November 15, 2018 Hi, Yes, it's RHD and ex South African. I'm rubbish at driving LHD so this is a great way for me to get a classic American car. Sorry I don't know any production figures. Cheers, Bob. Quote
Andydodge Posted November 16, 2018 Report Posted November 16, 2018 Bob.........I'm no expert on post war mopars but that dash looks a lot like a 46-48 Plymouth dash but with the DeSoto logo..........heres a pic of the dash that my 41 Plymouth Coupe had....and I agree re your thoughts on LHD/RHD tho' at least we did get factory RHD cars although 99% were just 4drs like my 40 Dodge Quote
DrDoctor Posted November 16, 2018 Report Posted November 16, 2018 (edited) . Edited December 20, 2018 by DrDoctor Quote
MackTheFinger Posted November 20, 2018 Report Posted November 20, 2018 On 11/15/2018 at 9:25 AM, hurnleft said: That's a great looking car!! Quote
mrwrstory Posted November 23, 2018 Report Posted November 23, 2018 Yes, great looking car! I did a similar IFS swap on my P15, documented on this forum with photos some years back. I think it's all evaporated by now. I'll do some digging and see if I can come up with some pics. Briefly, I used an aftermarket clip from Kugel Komponents that is designed for early Ford applications. They will make them to accomodate any frame/track width. There are other manufactures who produce a similar concept. The concept assumes a vertical surface i.e. a "channel" frame section at the point of installation. I split my frame from the firewall to the spring pockets in a straight line and at a width similar to an early Ford. I then welded in a 1/4" plate from firewall to spring pocket which yielded two parallel surfaces similar to the outside surfaces of an early Ford frame. The IFS cross member kit slipped over and were welded to the vertical surfaces. The frame haves that were previously removed, were welded back on yielding an almost stock look to the frame. Quote
mrwrstory Posted November 23, 2018 Report Posted November 23, 2018 Here's an image I picked from my earlier thread where most of the pics are gone. I now have about 35K miles on the modification and couldn't be happier. Please feel free to shoot me questions Quote
mrwrstory Posted November 23, 2018 Report Posted November 23, 2018 Another, you can see the weld seam along the center of the stock P15 frame rail Quote
hurnleft Posted November 24, 2018 Author Report Posted November 24, 2018 mrwrstory. That 'stock' look is exactly what I'm hoping for. I'll get back to you with questions when we get the job going (just waiting for a workshop slot at present. Cheers, Bob (hurnleft) Quote
mrwrstory Posted November 29, 2018 Report Posted November 29, 2018 I decided to get on top of this subject 'cause I had no idea where to find the old pics. Succeeded in the hunt. Check the attached. Gime a shout if you have questions. Quote
hurnleft Posted December 6, 2018 Author Report Posted December 6, 2018 Sorry for the late reply. Thanks very much for the photos, I'm sure they'll be of great help. Quote
greg g Posted December 7, 2018 Report Posted December 7, 2018 Bill go to manage my attachments tool for. Your profile page. If you put photos up without using a third party host like photo bucket they may still be there. Quote
mrwrstory Posted December 7, 2018 Report Posted December 7, 2018 (edited) 10 hours ago, greg g said: Bill go to manage my attachments tool for. Your profile page. If you put photos up without using a third party host like photo bucket they may still be there. Greg, Tx for the tip. Nothing there. Probably a time when I did not choose that option over PhotoBucket which I no longer use. Edited December 7, 2018 by mrwrstory Quote
DrDoctor Posted December 7, 2018 Report Posted December 7, 2018 (edited) . Edited December 20, 2018 by DrDoctor 1 Quote
mrwrstory Posted December 9, 2018 Report Posted December 9, 2018 Not to take exception to the Drs comments, I agree to the frailties of the MII frontend kits. Re my project and my complete satisfaction and trust, the Kugel crossmember is a complete assembled package with the MII geometry established. A more robust unit. Not a bucha parts to piece together with the "long bolt" that can become the weak link. Quote
DJ194950 Posted December 9, 2018 Report Posted December 9, 2018 I prefer All bolts under high stress and critical parts like suspension to have setups that are supported on both sides on the mount like this roadstershop.com front suspension-Way Strong. http://roadstershop.com/wp-content/uploads/2015/10/REVO-IFS2.jpg DJ 1 Quote
tom'sB2B Posted December 10, 2018 Report Posted December 10, 2018 Are those aftermarket turn signal indicators on the top of the fenders? I find them to be very attractive additions. I look forward to following your progress Quote
DrDoctor Posted December 11, 2018 Report Posted December 11, 2018 (edited) . Edited December 20, 2018 by DrDoctor Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.