mrtillie Posted October 18, 2016 Report Share Posted October 18, 2016 I have a couple of pics of my dodge center section. Can anyone tell me what it is? I thought it might be a early 8.3/4 but it has 12 bolts in it. Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted October 18, 2016 Report Share Posted October 18, 2016 (edited) Just out of curiosity,why have you removed it? Are you looking for rears that will interchange,or parts to repair that one? Edited October 18, 2016 by knuckleharley Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted October 18, 2016 Report Share Posted October 18, 2016 surely somewhere on that hoghead is a casting number...... Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted October 18, 2016 Report Share Posted October 18, 2016 What are the cast in numbers and stamped numbers on the driver side-middle or on near the top of the third member cast housing (hogs head), not shown in previous pictures?? DJ Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted October 19, 2016 Report Share Posted October 19, 2016 (edited) 37 minutes ago, DJ194950 said: What are the cast in numbers and stamped numbers on the driver side-middle or on near the top of the third member cast housing (hogs head), not shown in previous pictures?? DJ I agree...if you wish help, help those trying to help by posting any numbers found......me memory is screaming this was asked by him in a previous thread Edited October 19, 2016 by Plymouthy Adams Quote Link to comment Share on other sites More sharing options...
RobertKB Posted October 19, 2016 Report Share Posted October 19, 2016 I agree about posting any numbers you may find. I also have a 1948 Dodge D25 Special Deluxe Club Coupe. If it is any help, the gear ratio in my car is a 3.9. Contact me if you need any help or advice on the car. Mine was once in pieces as well. It looks like you have a great project. Hope you are going to keep it stock! 1 Quote Link to comment Share on other sites More sharing options...
Los_Control Posted October 19, 2016 Report Share Posted October 19, 2016 On my trucks, the number is here Quote Link to comment Share on other sites More sharing options...
Young Ed Posted October 19, 2016 Report Share Posted October 19, 2016 1 hour ago, RobertKB said: I agree about posting any numbers you may find. I also have a 1948 Dodge D25 Special Deluxe Club Coupe. If it is any help, the gear ratio in my car is a 3.9. Contact me if you need any help or advice on the car. Mine was once in pieces as well. It looks like you have a great project. Hope you are going to keep it stock! Do you know if the Special Deluxe nameplate is the same as a Plymouth? Or if not can you post a close up? He was looking for some in the wanted section but we didn't know if they were the same as a P15. 1 Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted October 19, 2016 Report Share Posted October 19, 2016 mrtillie- I really meant to ask about the passengers side location of the third member for the numbers, that is where I found them on four Car rear ends that I have had. They were in the same location I mentioned in the previous (opposite side-drivers). A forum member from Australia also found the numbers located there. DJ Quote Link to comment Share on other sites More sharing options...
RobertKB Posted October 20, 2016 Report Share Posted October 20, 2016 19 hours ago, Young Ed said: Do you know if the Special Deluxe nameplate is the same as a Plymouth? Or if not can you post a close up? He was looking for some in the wanted section but we didn't know if they were the same as a P15. Yes, they are the same. Quote Link to comment Share on other sites More sharing options...
mrtillie Posted October 31, 2016 Author Report Share Posted October 31, 2016 (edited) I have been working on the car and didnt check this posting, I will look again for any markings or # on the center section. Edited October 31, 2016 by mrtillie Quote Link to comment Share on other sites More sharing options...
mrtillie Posted October 31, 2016 Author Report Share Posted October 31, 2016 (edited) On 10/19/2016 at 3:16 PM, DJ194950 said: mrtillie- I really meant to ask about the passengers side location of the third member for the numbers, that is where I found them on four Car rear ends that I have had. They were in the same location I mentioned in the previous (opposite side-drivers). A forum member from Australia also found the numbers located there. DJ I will check again. I want to put in a posi and maybe a different gear. Id like to know that its strong enough for more power. Edited October 31, 2016 by mrtillie Quote Link to comment Share on other sites More sharing options...
mrtillie Posted October 31, 2016 Author Report Share Posted October 31, 2016 Im getting deep into this project now. Quote Link to comment Share on other sites More sharing options...
mrtillie Posted October 31, 2016 Author Report Share Posted October 31, 2016 On 10/18/2016 at 5:11 PM, knuckleharley said: Just out of curiosity,why have you removed it? Are you looking for rears that will interchange,or parts to repair that one? Im stripping the car out and cleaning up some rust issues under the car. Im down to a shell now. Ordered floor pans and sills to install. I did the brakes a couple of years ago and the rearend is in good working condition. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.