HanksB3B Posted November 2, 2013 Report Posted November 2, 2013 Have a great trip you guys and a hell of a lot of fun ! hank Quote
Jeff Balazs Posted November 2, 2013 Report Posted November 2, 2013 Hank; I have an extra glass bowl you can have. I eliminated two of them when I did my fuel system mods. I found I didn't really like watching the fuel in it percolate after shutting the engine off. Jeff Quote
HanksB3B Posted November 2, 2013 Report Posted November 2, 2013 Jeff, I could use one. Mine is the type that screws into the Carter Fuel Filter Unit and measures approximately 2.043" in diameter and is 2.424 deep. I'm spending the early morning hours epoxying, sanding and polishing a small chip that allows a small leak. I really can't wait to see your truck on the road, Hank Quote
Desotodav Posted November 2, 2013 Report Posted November 2, 2013 .. I found I didn't really like watching the fuel in it percolate after shutting the engine off. Jeff I often wondered about the rising bubbles in that filter Jeff. I suppose that 'percolate' does best describe it ! Quote
Jeff Balazs Posted November 2, 2013 Report Posted November 2, 2013 Hank; Send me a PM with your address and I will mail you one next week. Davin; Yes the I & E manifold arrangement is one thing I really don't care for about these engines. Part of me would love to open the hood and see some nice headers and a big Webber sidedraft carb in place of whats there now. Jeff Quote
ggdad1951 Posted November 3, 2013 Author Report Posted November 3, 2013 download from today: lots of great parts, I think I could help lots of people. Todd will start going thru the boxes probably as I speak I'm sure here is digging through them right now and will get the news to everybody with all the good treats Quote
52b3b Joe Posted November 3, 2013 Report Posted November 3, 2013 I can't wait to see what ya got! Quote
ggdad1951 Posted November 3, 2013 Author Report Posted November 3, 2013 (edited) ok, here is a shot or Todd and I, Merle couldn't make the trip and the "stuff". What I DO have at home and looking for new homes 3, yes 3 rear drivers fenders. These are all the "round" renders, the none square ones. One is NOS for an EARLY 48 (shorted on the rear by 4" or so), the other two are just normal fenders. All are in VERY good condition, let me know who is interested, 4mula-dlx get his fender it seems! Todd will start to plow thru the boxes and let me know what is all there and I'll drive over to his place as soon as I can to help inventory. LOTS of stuff! I'm going to keep the NOS hood that's never seen a truck, oddly just from being moved around over the years it has cracked just like they do in the truck. There are 2 more very good condition hoods and an old style steering column with a good wheel. And of course doors...lots of doors....9' bed sides, bunch of starters genis and water pumps, window stuff....just so much stuff! While transfering a few things to my truck to bring home to MN a guy in the parking lot wanted to buy a door for his wall, but $25 wasn't going to get me to dig one out. Anyway, that's what I know for now, PM me with any questions. Edited November 3, 2013 by ggdad1951 Quote
Jeff Balazs Posted November 3, 2013 Report Posted November 3, 2013 Wow! Todd has a halo! Wrong color..... but a halo just the same. Way to go Boy's. Jeff Quote
HanksB3B Posted November 3, 2013 Report Posted November 3, 2013 Wow! Todd has a halo! Wrong color..... but a halo just the same. Way to go Boy's. Jeff I saw that too. They look like movie chararacters not Breaking Bad more like "Fixing Good" ? hank Quote
Merle Coggins Posted November 3, 2013 Report Posted November 3, 2013 Cool. Wouldn't you know... as it turned out my work at the motorcycle school range got postponed until today. But by the time that happened it was too late to try to catch up with you guys. Let me know when you're going to visit Todd. Maybe I can make the trip up there to give you a hand, and to check out the bounty. Merle Quote
48Dodger Posted November 3, 2013 Report Posted November 3, 2013 Dang...bounty is right! Great job guys! 48D Quote
Jeff Balazs Posted November 4, 2013 Report Posted November 4, 2013 I saw that too. They look like movie chararacters not Breaking Bad more like "Fixing Good" ? hank Hmmmm.......they kinda have a glazed over look. Maybe "Slipping Fast" is a better working title? Jeff Quote
49B1B Posted February 25, 2014 Report Posted February 25, 2014 I am in need of front grill peices and rear tail lights. I have a 49, so anything 48-51 should be fine. I need just the three lower, I have the hood one. And a ram ornament. Quote
ggdad1951 Posted February 25, 2014 Author Report Posted February 25, 2014 sorry, no grill parts or tail lights. I do have a hood ornament or two laying around. Quote
TheMoose Posted February 25, 2014 Report Posted February 25, 2014 I'm looking for a threaded hinge pin for the pass door mirror, it looks like the red door in the pic has one! Quote
ggdad1951 Posted February 25, 2014 Author Report Posted February 25, 2014 I'm looking for a threaded hinge pin for the pass door mirror, it looks like the red door in the pic has one! heh, I need it! Quote
Young Ed Posted February 25, 2014 Report Posted February 25, 2014 heh, I need it! I have 2 repro ones I bought for my 46 that are too small. You are welcome to try them. I'm not sure if they are just wrong or if my truck got drilled for oversized pins at some point. Quote
Don Coatney Posted February 25, 2014 Report Posted February 25, 2014 I have 2 repro ones I bought for my 46 that are too small. You are welcome to try them. I'm not sure if they are just wrong or if my truck got drilled for oversized pins at some point. Might be a good idea to measure the hole and the pin. Quote
Young Ed Posted February 25, 2014 Report Posted February 25, 2014 Might be a good idea to measure the hole and the pin. I have no idea what the original size is so I have nothing to compare that measurement to. I just know they are too small.... Quote
Larry Leibhart Posted February 25, 2014 Report Posted February 25, 2014 Dodge Central of Michigan has the threaded pin for $8.50 part number B-508-48 fits the B series pickups. 1 Quote
49B1B Posted February 26, 2014 Report Posted February 26, 2014 sorry, no grill parts or tail lights. I do have a hood ornament or two laying around. How much shipped to 62221 please. Quote
TheMoose Posted February 26, 2014 Report Posted February 26, 2014 (edited) Dodge Central of Michigan has the threaded pin for $8.50 part number B-508-48 fits the B series pickups. Looks like correct PN is B-508-B, got one ordered. http://dodgecentralmi.biz/ocart/Body/doors/b-508-b-door-hinge-pin-w-threads-3-1578857017.html Edited February 26, 2014 by TheMoose Quote
Robert Thornton Posted February 26, 2014 Report Posted February 26, 2014 I got one from central mi it was 2 1/2 in 1/4 thread good fit on my right door mirror . Quote
ggdad1951 Posted February 26, 2014 Author Report Posted February 26, 2014 I got one from central mi it was 2 1/2 in 1/4 thread good fit on my right door mirror . Ed how does yours measure up? 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.