Robert Horne Posted February 9, 2013 Report Posted February 9, 2013 I run by a filter system for antifreeze, to install on the heater hose. NOS,,,, I found a newer version also... Quote
greg g Posted February 9, 2013 Report Posted February 9, 2013 OK, I'll bite. Why??? Maybe with the old alcohol based stuff but with modern stuff with additives, I don't see the need, othere than for a period correct accessory. Quote
BobT-47P15 Posted February 9, 2013 Report Posted February 9, 2013 Hmmm.........I've never seen those things before. The small inline filter looks about the same as the gasoline line filter. Quote
chopt50wgn Posted February 9, 2013 Report Posted February 9, 2013 You have to be carefeul when using a coolant filter. If the motor has had many miles of a 50/50 mix, there will be lots of tiny particles of rust floating in the system. That will eventually clog the filter. So it is a good idea to keep a close eye on the filter as to not impede flow for the cooling system. Quote
Robert Horne Posted February 10, 2013 Author Report Posted February 10, 2013 You have to be carefeul when using a coolant filter. If the motor has had many miles of a 50/50 mix, there will be lots of tiny particles of rust floating in the system. That will eventually clog the filter. So it is a good idea to keep a close eye on the filter as to not impede flow for the cooling system. This filter is attached to the heater hose. If the filter would clog, that would be no different than shutting off the heater valve. The newer version is clear, so easy to see. It does look like the new fuel filters, except it has 5/8 connections... Quote
Robert Horne Posted February 10, 2013 Author Report Posted February 10, 2013 OK, I'll bite. Why??? Maybe with the old alcohol based stuff but with modern stuff with additives, I don't see the need, othere than for a period correct accessory. Greg, this is the first one I have ever seen... Just came accross it on ebay.... Quote
greg g Posted February 10, 2013 Report Posted February 10, 2013 Never seen one other than what you posted. Quote
Plymouthy Adams Posted February 10, 2013 Report Posted February 10, 2013 as if they are not getting enough of our money in normal maintenance as it is...lol I could see this for a short spell if bring a crusty block back from the dead..not sure if I would run this long term.. Quote
Mark D Posted February 10, 2013 Report Posted February 10, 2013 There's a version like that on eBay right now. Quote
chopt50wgn Posted February 10, 2013 Report Posted February 10, 2013 If it's only filtering the heater sytem then why? The entire cooling system I could see but to filter a loop of coolant seems to be a waste..just my 2 cents Quote
Young Ed Posted February 10, 2013 Report Posted February 10, 2013 The heater system uses the same coolant as the rest of the cooling system. So technically it would be filtering it all. Granted some particles might not make it into that loop. Would probably be worth the hastle if you have a really expensive or difficult to change heater core. Plus a clogged filter should only result in no heat and not an engine overheat. Quote
chopt50wgn Posted February 11, 2013 Report Posted February 11, 2013 Coolant for a heater is a loop that circulates from the pump to the heater core. It does not go thru the radiator or mix with the other coolant. Quote
Don Coatney Posted February 11, 2013 Report Posted February 11, 2013 Coolant for a heater is a loop that circulates from the pump to the heater core. It does not go thru the radiator or mix with the other coolant. You might want to re-think that a bit. If the heater coolent does not mix with the engine coolent then how does it get hot? The heater supply hose is located at the hottest location of the engine. This is the back of the head on a flathead 6 engine. The hot water goes through the heater core and returns to the suction side of the water pump where it intermingles with the water being returned from the radiator. Much like how a by-pass oil filter works, all engine coolant goes through the heater core and radiator at some point. Quote
55 Fargo Posted February 11, 2013 Report Posted February 11, 2013 (edited) You might want to re-think that a bit. If the heater coolent does not mix with the engine coolent then how does it get hot? The heater supply hose is located at the hottest location of the engine. This is the back of the head on a flathead 6 engine. The hot water goes through the heater core and returns to the suction side of the water pump where it intermingles with the water being returned from the radiator. Much like how a by-pass oil filter works, all engine coolant goes through the heater core and radiator at some point. Absolutely, on a hot summers days, when engine temps get high, you could actually run heater blower motor to help dissipate engine coolant heat, if you can stand it.The heater coolant circuit is in no way independent from the main cooling system, how else would this coolant get hot, as you explain. Edited February 11, 2013 by C38Spitfire6 Quote
randroid Posted February 11, 2013 Report Posted February 11, 2013 Gents, When I was in my 20's I got to see a mid-30's Cadillac with a V-16 and it was a thing of pure joy. Two eight cylinder engines joined at the crank, two eight cylinder distributors, and an extra oil sump alongside the block where the dipstick went so the oil could be checked with the engine running. This antifreeze filter reminds me somewhat of that extra oil sump in that it is a spiffy add-on but unnecessary because when the antifreeze is changed any crud in the system goes away with the old fluid. I'd put an original one on Pigiron just because I'd be the only kid on the block to have one but wouldn't rely on it to do much other than go along for the ride. I also wouldn't want to need to justify it to anyone any more than I'd want to justify not having an SBC under the hood. Nice find, Robert. -Randy Quote
chopt50wgn Posted February 11, 2013 Report Posted February 11, 2013 I shoud have been alittle more specific...............yes, the coolant does pickup heat from the motor. But the coolant in the heater system gets there thru a bypass. I am not a flathead guru so I am basing this on a typical V-8 motor. Quote
Don Coatney Posted February 11, 2013 Report Posted February 11, 2013 I shoud have been alittle more specific...............yes, the coolant does pickup heat from the motor. But the coolant in the heater system gets there thru a bypass. I am not a flathead guru so I am basing this on a typical V-8 motor. The flow is the same on a V-8. I hope this flow chart will help. The fluids are one and the same. Quote
Robert Horne Posted February 12, 2013 Author Report Posted February 12, 2013 Maybe what we need, is to get the electric out of the water. I see on the Auto Parts websites, there are many coolant filters available for cars. These look like oil filter that screw onto a base.. I was wondering if anyone had installed some type of "sacrafice rod" in a radiator, like that in a home water heater. With so many types of materials, steel, brass, copper, aluminum, no wonder the cooling systems get in poor condition.... Quote
Scruffy49 Posted February 12, 2013 Report Posted February 12, 2013 The filter should contain a coolant life extender. That's how the modern ones work for on highway diesel engines. As the coolant ages, it loses strength, the filter additive package helps to balance that out. Even our John Deere turbo diesels have coolant filters. You can get filter elements that contain sacrificial anodes/plates to slow the galvanic corrosion action. You could also just drill and tap a coolant passage to accept the anode off an outboard motor lower unit. But, it will create another potential failure point... Truck Pro, Fleet Pride or Tractor Supply Company should have add on inline coolant filter units. Do you need them,no. Do they help? All the big rig engine manufacturers seem to think so, or they would not have added them at the factory. You do have to match the coolant type to the filter type if it is a conditioner as well as filter. The conditioners aren't spec'd for "green goo", they require an extended life formula. Quote
55 Fargo Posted February 12, 2013 Report Posted February 12, 2013 Here is a ?, I have an aftermarket mechanical temp gauge in the 55 Fargo, but now have an electric sender for the stock gauge. Could I plumb this into the heter hose outlet, just before the heat control valve. The reason for this, I could keep both gauges, the factory gauge is the C-H type, and the aftermarket gives me numbers in degrees Quote
55 Fargo Posted February 12, 2013 Report Posted February 12, 2013 I shoud have been alittle more specific...............yes, the coolant does pickup heat from the motor. But the coolant in the heater system gets there thru a bypass. I am not a flathead guru so I am basing this on a typical V-8 motor. Coolant flows from back of the head, through heater core, then exits and gets pumped back into water jacket through water pump, some have internal by-pass, some do not, it really is irrelevant. The only way water does not flow out the back off the head, is if a valve stops it, even if there is no heatercore, and is plumbed right back to the water pump, things will circulate and fairly quickly too... The by-pass, just allows this process, while t/stat is closed, until the engine temp rises, you already are aware of this, but some may not be. Quote
Don Coatney Posted February 12, 2013 Report Posted February 12, 2013 Here is a ?, I have an aftermarket mechanical temp gauge in the 55 Fargo, but now have an electric sender for the stock gauge. Could I plumb this into the heter hose outlet, just before the heat control valve. The reason for this, I could keep both gauges, the factory gauge is the C-H type, and the aftermarket gives me numbers in degrees I am sure you could. But if the probe is not in the head the reading may not be accurate. Quote
desoto1939 Posted February 12, 2013 Report Posted February 12, 2013 I called the manufacturer regarding the radiator cap and the anode for use in our older cars. I stated that we have cast iron blocks and baiscally the hoeny comb radiator with the brass. He stated that we do not need the anode in the radiator becasue we do not have any aluminum Quote
Robert Horne Posted February 12, 2013 Author Report Posted February 12, 2013 C38,,,I have two temp gauges on my Coupe.,,,both work ok.... The original is just before the heat control vailve. Quote
55 Fargo Posted February 12, 2013 Report Posted February 12, 2013 Robert, the temp gaugue you have plumbed on heater hose line, is it as accurate as the other? Do they give similar or identical temp readings? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.