Jump to content

Reg Evans

Members
 View Profile  See their activity

  • Posts

    5,124

  • Joined

  • Last visited

  • Days Won

    14

 Content Type 

Everything posted by Reg Evans

  1. Reg Evans
    You might be able to put your 3/4 hubs on 1/2 ton drums. The wheel adapters sure would be easier though. These guys have a lot of spacers and adapters. http://cgi.ebay.com/ebaymotors/Jeep-Wheel-Spacers-Adapters-Aluminum-1-5-5x4-5-5-Lug-/330470653102?pt=Motors_Car_Truck_Parts_Accessories&hash=item4cf195fcae
  2. Reg Evans
    Speaking of Chuck....go here. http://www430.pair.com/p15d24/mopar_forum/showthread.php?t=4883&highlight=chuck+yeager
  3. Reg Evans
    I paid right around $300 for my dual setup including the mufflers.
  4. Reg Evans
    I've used lacquer thinner and then a hot soapy water rinse with great results.
  5. Reg Evans
    >>>>> Go Tim Go >>>>>
  6. Reg Evans
    Tom, Tim is at the salt flats for a couple of days with >>>>>>>The Worlds Fastest Pilot House>>>>>>>. He'll probably get back to you after he returns. Reg PS....got any photos of the project ?
  7. Reg Evans
    Make sure you choke if fully open after warm up.
  8. Reg Evans
    Try Tod's site here. http://www.ply33.com/Parts/group9
  9. Reg Evans
    I removed one of those fuel pump bowls last week and before I could get it completely off gas ran down my raised arm and into my arm pit. OUCH ! Gasoline and tender arm pits should never meet.
  10. Reg Evans
    Could that number be L6P ? If so it's a 58 Dodge truck engine. http://www.t137.com/registry/help/otherengines/19581968engines.html
  11. Reg Evans
    Young Ed, For now, until the pain of R n R-ing it fades away get a gps and calibrate the front of the glass with a grease pencil. Old Reg
  12. Reg Evans
    Go Man Go !!!!
  13. Reg Evans
    I have a new one I'll sell ya for $25 + shipping. PM me with your address if you still need one. Internal or external bypass ?
  14. Reg Evans
    Steering box insulators? I don't know if the 35 has them but I'll have a look. I did adjust the steering box a little but haven't taken it on a test drive yet. Guess I'd better replace the king pins too. Thanks guys.
  15. Reg Evans
    Some times while driving my 35 Dodge on a bumpy road The front wheels will start wobbling real bad. It seems to have gotten worse lately. With the wheels off the ground I have detected slightly worn king pins if I grab the bottom of the wheel and lift outward. The ball joints and drag link seem tight and when I grab one wheel and turn the wheels I only see a little slop at the steering box. Could the king pin wear be causing this wobble? The car has fairly new bias ply tires on it.
  16. Reg Evans
    Nice work Ed ! Get ready though cause she's gonna be on you now to install the window trim.
  17. Reg Evans
    I've used both YnZ's and Rhode Island harnesses and was very happy with the quality and the tech support.
  18. Reg Evans
    I'll bet it's gonna look great after a weekend of detailing. Good thing it wasn't kept in a vault underground.
  19. Reg Evans
    I wonder if that's a fire retardant flannel shirt the X car's driver is wearing and if that's a crash helmet or a beanie cap with a propeller on top. Ah, the good ole days.
  20. Reg Evans
    Kinda like this?
  21. Reg Evans
    Hey, wanna a good deal on an industrial sewing machine ?
  22. Reg Evans
    I think you must be right.
  23. Reg Evans
    I never saw that before. The owner must be a young blade.
  24. Reg Evans
    Eat your heart out sunny boy. I'm a kept old man now thanks to my much younger sugar momma.
  25. Reg Evans
    Ah...my sediments exactly.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use