Need some clarification regarding ECI Master Cylinder kit 1941 Plymouth - what happens to the stock pedals, how do you mount them

[desertdroog]

Please bear with me, as I am learning about my 1941 MoPar.

 

I have already searched this forum and downloaded the PDF from ECI Brakes to learn about what the kit is, and I still have a few questions since I didn't see any images that show what and 1941 Plymouth ECI dual master reservoir kit looks like installed.

 

I have finally finished my Model A project and am planning out my 1941 Plymouth Business Coupe project (8 years longer than I had anticipated). I have a specific question about the ECI Master kit if anyone has knowledge on this upgrade when changing to a dual master reservoir from the original single master. I understand that the 1941 Plymouth Master Cylinder has a hoop on the front which holds a bushing for the pedals which are mounted on this unit. If that is the case, how do the pedals locate when you remove the stock master cylinder and use one that ECI offers?  Do they have a bracket/pedestal where you press in the Pedal pins?

 

If I am not being clear with my description, I am talking about what I learned in these videos:

 

Looking at the pdf ECI offers on this page:

https://ecihotrodbrakes.com/chrysler-master-cylinder-assemblies

 

They have two drafted images of the brackets but I cannot make heads or tails of how that will be  a solution for mounting the stock pedals as the video above shows the pin and loop on the master cylinder as being a complete unit, rather than like in a Ford application of the same year being an assembly that are divorced from the master cylinder.

 

I am looking for anyone who has done this update when modernizing their brake system and what to expect if they can answer how the Pedals will mount when you remove what looks to be a very integral part of locating them under the floor. I would like to keep my stock pedals and not go to a firewall setup and I don't want to go to a ECI style universal under floor setup if I don't have to either, shown here:
https://ecihotrodbrakes.com/compact-underfloor-systems

 

 

Edited Monday at 05:18 PM by desertdroog
Added second video for clarification

[Plymouthy Adams]

Not to sound snarly but it may seem that way to a few, but if you are entertaining or have bought a kit from supplier, then by all means that said supplier should be able and WILLING to address any issue you may have any aspect of applying their wares to your vehicle.   

 

You will likely get a reply to link here to I DID THIS or I DID THAT but nay not be exact to your application.   To say they just plug and play, for the most part many of the kits strive for this but there are always it seems some tweaks by most users before the job is buttoned up and done.  

[bacelaw]

The 41 plymouth master cylinder doesn't have a hoop on it for the pedal mechanism...on the 41, the master is totally separate from the pedal assembly....fyi

[Dave72dt]

I saw an asterisk in the price reference of the 39-41 kit and following that down to the bottom of the page is an additional part required for standard shift trans.  Install instructions seemed fairly straight forward.  There's also a pic of the kit with the bracket at the bottom of the page.  It would be nice if it was larger but it's something to get an idea from.  ECI should be willing to help.  If not, consider some other company.

[Bob Riding]

Here are some pics from my '40 wagon using the ECI kit. It has always worked well and was straightforward to install.