billrigsby Posted October 31, 2020 Report Share Posted October 31, 2020 Looks like we're getting close, looking for recommendations on what Lube to use for engine assembly? Locally we have Napa, Advanced and AutoZone, and of course there's eBay and Amazon. Thanks Quote Link to comment Share on other sites More sharing options...
billschwindt Posted October 31, 2020 Report Share Posted October 31, 2020 Talk to your machinist he would normally have the correct stuff. Quote Link to comment Share on other sites More sharing options...
billrigsby Posted October 31, 2020 Author Report Share Posted October 31, 2020 3 minutes ago, billschwindt said: Talk to your machinist he would normally have the correct stuff. Hi Bill, I'll ask him but like you heard, he doesn't do assembly so I figured I would ask around here first. Was nice to meet you today. Maybe one of these days we'll be together at a show, but that'll be a few years off for me I think. Quote Link to comment Share on other sites More sharing options...
P15-D24 Posted October 31, 2020 Report Share Posted October 31, 2020 Quote Link to comment Share on other sites More sharing options...
Merle Coggins Posted October 31, 2020 Report Share Posted October 31, 2020 (edited) There are many types out there, but I’ve always used this stuff. According to Napaonline.com my local store has it in stock. Edited October 31, 2020 by Merle Coggins Quote Link to comment Share on other sites More sharing options...
Dave72dt Posted October 31, 2020 Report Share Posted October 31, 2020 Same stuff I've used for years. There's other assembly lubes available but for an engine that may get installed and not started immediately after assembly, I find that the Lubriplate stays in place better than the more liquid types. I even put a swipe of it in cylinder bores before installing oil soaked pistons. I think it helps retain that oil in the cylinders before initial startup. By the time the initial break-in time is done, it's all melted out and you haven't scored up the cyl walls with dry starts. That's my theory, anyway, for what it's worth. Quote Link to comment Share on other sites More sharing options...
tom'sB2B Posted November 1, 2020 Report Share Posted November 1, 2020 Quote Link to comment Share on other sites More sharing options...
gramps1951 Posted November 1, 2020 Report Share Posted November 1, 2020 On 10/31/2020 at 8:13 AM, Merle Coggins said: There are many types out there, but I’ve always used this stuff. According to Napaonline.com my local store has it in stock. Quote Link to comment Share on other sites More sharing options...
kencombs Posted November 1, 2020 Report Share Posted November 1, 2020 This stuff:on bearings and cam. Used to use Lubriplate until this became available. Engine oil on pistons/rings/cylinder walls. And a fresh shot of oil in each spark plug hole, followed by turning it over to spread it around, just before starting. And, most important in my mind, fill the oil pump with vaseline to assure it starts pumping immediately. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.