knuckleharley Posted June 11, 2017 Report Share Posted June 11, 2017 20 minutes ago, keithb7 said: Here is my 1953 Windsor. Not art deco, but pretty neat in my books. Most everything works. Did these cars have window defroster vents in the dash? The heater control has defrost options, but I see no vents. Possibly an earlier owner covered them up when they recovered the dash? Not that it will ever see cold or rain again, but just curious. The instrument cluster looks just like the one in my 49 Windsor. Heaters and defrosters were options when these cars were new. It is possible someone ordered your car new without picking those options,and some later owner installed a heater. Quote Link to comment Share on other sites More sharing options...
The Oil Soup Posted June 11, 2017 Report Share Posted June 11, 2017 21 hours ago, Andydodge said: Donald.........your Desoto dash is exceptional.....is the marbled wood areas on the dash and door window garnish moldings a separate piece or just part of the dash/molding that someones taken an inordinate amount of time & effort with?.............who did it?..............its truly beautiful..........do you have any pics from the other side?....................thanks, Andyd Here is a link to how the dash was done. Sadly a vanishing art. http://www.woodgraining.com Quote Link to comment Share on other sites More sharing options...
Andydodge Posted June 12, 2017 Report Share Posted June 12, 2017 Thanks Oil & Donald.......what intrigued me about Donalds dash was that there were 2 different colours and patterns on the one piece, something that I don't recall seeing before..........thanks, andyd Quote Link to comment Share on other sites More sharing options...
DonaldSmith Posted June 12, 2017 Report Share Posted June 12, 2017 Andy, you wanted to see the other side of my dashboard. From when I was putting the carpet in: Yes, how did they do the inlays, when the base is one piece of metal? Inquiring minds need to know. 1 Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted June 12, 2017 Report Share Posted June 12, 2017 the vents for the defroster during this period of time was usually a thin but long unnoticeable slit that IS PART of the window garnish molding with rubber cofferdams on the underside of the garnish at each vent (vent is mounted to the under dash structure of the cowl) these cofferdams make sure the air is channeled to the to windshield. 1 Quote Link to comment Share on other sites More sharing options...
pflaming Posted June 13, 2017 Author Report Share Posted June 13, 2017 (edited) Pontiac dash. Which years? Edited June 13, 2017 by pflaming Quote Link to comment Share on other sites More sharing options...
countrytravler Posted June 13, 2017 Report Share Posted June 13, 2017 2 Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted June 13, 2017 Report Share Posted June 13, 2017 48 minutes ago, pflaming said: Pontiac dash. Which years? 1953, could have carried forward to 54 Quote Link to comment Share on other sites More sharing options...
st63 Posted June 13, 2017 Report Share Posted June 13, 2017 Nothing fancy...the original un-restored dash of my '41 P-12. 38k original miles, with very minimal wear to the upholstery, steering wheel etc. 2 Quote Link to comment Share on other sites More sharing options...
Reg Evans Posted June 14, 2017 Report Share Posted June 14, 2017 I use to make these and more back in the late 70's 1 Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted June 14, 2017 Report Share Posted June 14, 2017 1 hour ago, Reg Evans said: I use to make these and more back in the late 70's Why did you quit? Quote Link to comment Share on other sites More sharing options...
Reg Evans Posted June 14, 2017 Report Share Posted June 14, 2017 Well, I sold my silk screening business which this was a part of and moved up to the country to build homes. I do wish I had kept this part of the business for a little extra dough for my golden years. Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted June 14, 2017 Report Share Posted June 14, 2017 10 minutes ago, Reg Evans said: Well, I sold my silk screening business which this was a part of and moved up to the country to build homes. I do wish I had kept this part of the business for a little extra dough for my golden years. I am so ignorant about silk-screening that I didn't even know it was a part of the process. That sure was some pretty stuff though,and it had to have felt good to make it. 1 Quote Link to comment Share on other sites More sharing options...
chopt50wgn Posted June 14, 2017 Report Share Posted June 14, 2017 This is the dash in my 50 Ply wagon. I added Autometer gauges and kept the stock radio insert with radio delete plates. Then did everything in aluminum and powder coated everything in a silver to give it that fresh aluminum look. Also built the custom console with the tach mount. 2 Quote Link to comment Share on other sites More sharing options...
pflaming Posted June 14, 2017 Author Report Share Posted June 14, 2017 Can anyone identify these two full patina boards? 1 Quote Link to comment Share on other sites More sharing options...
Don Coatney Posted June 14, 2017 Report Share Posted June 14, 2017 I built this dashboard to test run my engine. 3 Quote Link to comment Share on other sites More sharing options...
rcb Posted June 14, 2017 Report Share Posted June 14, 2017 (edited) On 6/10/2017 at 9:23 PM, knuckleharley said: " 47 DeSoto " BEAUTIFUL! Don't you mean De Beautiful? Or even De Lovely? Kidding aside, I totally agree. Edited June 14, 2017 by rcb Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted June 14, 2017 Report Share Posted June 14, 2017 (edited) 5 hours ago, pflaming said: Can anyone identify these two full patina boards? The bottom one is from a 37 to 39,maybe 40 IHC pu. The same dash cluster was used up to the late 40's or maybe even longer,but the crank out windshield identifies it as a pre-40. BTW,any of the grille trim still there? I need a shifter knob,too Edited June 14, 2017 by knuckleharley Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted June 14, 2017 Report Share Posted June 14, 2017 knuckle, I think you will find that the KB series continued with the crank out windshield through to next series truck debut, The dash, the basic design on it carried into the KB series also but with the bars no longer on the outer as a divider but behind the lens in strikingly similar bar fashion. Hard to miss that steering and horn center also. I own a K1, a 1941 edition...simplicity at it finest, a front end whose external metal was most different. The nose and particular the double roll hood made these stand out from their counterparts. Quote Link to comment Share on other sites More sharing options...
countrytravler Posted June 14, 2017 Report Share Posted June 14, 2017 2 Quote Link to comment Share on other sites More sharing options...
countrytravler Posted June 14, 2017 Report Share Posted June 14, 2017 1934 Dodge 4 Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted June 14, 2017 Report Share Posted June 14, 2017 3 hours ago, Plymouthy Adams said: knuckle, I think you will find that the KB series continued with the crank out windshield through to next series truck debut, The dash, the basic design on it carried into the KB series also but with the bars no longer on the outer as a divider but behind the lens in strikingly similar bar fashion. Hard to miss that steering and horn center also. I own a K1, a 1941 edition...simplicity at it finest, a front end whose external metal was most different. The nose and particular the double roll hood made these stand out from their counterparts. I stand corrected. When did they end the crank-out windshield,48? Quote Link to comment Share on other sites More sharing options...
40plyrod Posted June 15, 2017 Report Share Posted June 15, 2017 Here's the dash out of my 40 Plymouth. The original gauges were in really bad shape and I was missing the center section so I decided to customize. I used the gauges out of a 48 ford and made the glove box door to match the shape, Speaking of which, anybody know what year glove box push button latch will interchange with the 1940, as you can see I'm needing one. 6 Quote Link to comment Share on other sites More sharing options...
40plyrod Posted June 15, 2017 Report Share Posted June 15, 2017 11 hours ago, countrytravler said: This is I think where my love of old vehicles started. My dad had one very similar to this and my earliest memories are riding/sleeping on the seat while he worked. Quote Link to comment Share on other sites More sharing options...
mrwrstory Posted June 15, 2017 Report Share Posted June 15, 2017 (edited) 10 hours ago, 40plyrod said: Here's the dash out of my 40 Plymouth. The original gauges were in really bad shape and I was missing the center section so I decided to customize. I used the gauges out of a 48 ford and made the glove box door to match the shape, Speaking of which, anybody know what year glove box push button latch will interchange with the 1940, as you can see I'm needing one. That's just a killer solution to a dash board! Creative while still respecting the theme of the car's design. Edited June 15, 2017 by mrwrstory 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.