Fuel pump heat shield

[Fernando Mendes]

Hank,I checked the angle(100º) showed in your heat shield figure.Can you check it again when you have time.I saw 80º(or smaller than 90º) with my angle measure instrument.Regards.

[HanksB3B]

You'll have to ask Mark (ggdad) he is the author.

Hank

[ggdad1951]

You'll have to ask Mark (ggdad) he is the author.

Hank

that model was done off my original shield and side by side they are identical. So whatever Pro-E kicked out for an angle, that's what mine was.

[Fernando Mendes]

You'll have to ask Mark (ggdad) he is the author.

Hank

Each one of us before make it see which is the correct angle.The important is see and correct.Ok Thanks Hank.

[DollyDodge]

Anybody have a picture to share that shows how the shield is bolted on?

[ggdad1951]

at the bottom at least, the top is on one of the manifold bolts

[Fernando Mendes]

Which is the thickness of this shield? I only can see in the pic one bolt that will hold the upper front of the shield(exhaust manifold).In rear bottom I can not see where is this shield held.Thanks:confused:

So thanks.

[ggdad1951]

.048" steel is the closest we have nowdays.

[Jeff Balazs]

I got one from Vintage Power wagons along with their PCV system.

They both are nicer than I expected. Will post photos when they are mounted.

Jeff

[DollyDodge]

Thanks for the picture, where did yup get the long screw for the shield?

[TodFitch]

Thanks for the picture, where did yup get the long screw for the shield?

http://www430.pair.com/p15d24/mopar_forum/showthread.php?t=30110

[TodFitch]

Thanks! I could have sworn that I had entered that search string.

[ggdad1951]

Thanks! I could have sworn that I had entered that search string.

I still have some if interested

[Merle Coggins]

I still have some if interested

 

Some what? Heat shields or drawings?

 

I should probably have a heat shield on mine. I just haven't got a round tuit yet.

 

Merle

[ggdad1951]

Some what? Heat shields or drawings?

 

I should probably have a heat shield on mine. I just haven't got a round tuit yet.

 

Merle

the heat shield to fuel pump spacer specialty bolt.

[Merle Coggins]

the heat shield to fuel pump spacer specialty bolt.

 

Oh... My pump already has the heat sheild stud, just no shield. I guess I'll have to fab one up one of these days.

As soon as I get one of these...

[ggdad1951]

Oh... My pump already has the heat sheild stud, just no shield. I guess I'll have to fab one up one of these days.

As soon as I get one of these...

well I did make a dxf and drawing to make your own that got put up on the Pilots Knowledge area...

[TodFitch]

well I did make a dxf and drawing to make your own that got put up on the Pilots Knowledge area...

 

Could we get the pdf and dxf files put into the new downloads area? That was the first place I looked before doing my unsuccessful search on the forums for this thread.

Thanks!

[ggdad1951]

Could we get the pdf and dxf files put into the new downloads area? That was the first place I looked before doing my unsuccessful search on the forums for this thread.

Thanks!

 

Admins?  Webmaster?

[B1B Keven]

Oh... My pump already has the heat sheild stud, just no shield. I guess I'll have to fab one up one of these days.

As soon as I get one of these...

Should have pulled the heat shield off of the motor in the back of my parts truck.

[Dave72dt]

It's still there, dpetca website under the resources button.