Jump to content

The Oil Soup

Members
 View Profile  See their activity

  • Posts

    668

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by The Oil Soup

  1. The Oil Soup
    You can get tubas made from brass also, but don't confuse the two.
  2. The Oil Soup
    I used them on the rear axle on mine. I believe they are 2.75" on center vs 4" for the stock ones. Worked fine for me. Lowered the ride height less than 1"
  3. The Oil Soup
    You might check your rings, I don't think it's supposed to smoke like that.
  4. The Oil Soup
    I found a carter inline glass bowl filter on ebay
  5. The Oil Soup
    A shop that rebuilds alternators or generators can take care of the starter
  6. The Oil Soup
    I put the fuzzy strip on both sides of the window instead of using the rubber bumpers and then installed the glass but that is w/o vent windows. may be different with them.
  7. The Oil Soup
    I did mine a while ago and I think that's right, disconnect rollers in track, rotate window 90 degrees, remove through top of door, remove regulator through access panel. Also w/o vent windows.
  8. The Oil Soup
    Can't wait until you're retire'd!
  9. The Oil Soup
    How about photos of the tach Paul?
  10. The Oil Soup
    Nice Paul!
  11. The Oil Soup
    Can't wait to see that hood ornament!
  12. The Oil Soup
    Go to http://www.crlaurence.com/crlapps/showline/offerpage.aspx?Productid=3300&GroupID=1677&History=39324:1497:1507&ModelID=1677 Type 720 into search for glass setting tape. 1/16" should be the right size. Use window cleaner as a lubricant on the glass and on the rail. Rail can be crimped slightly before install if it seems loose on glass. Rubber side of tape goes toward glass, cloth side toward rail. Good luck, Gary
  13. The Oil Soup
    At this point I won't be pulling the bearing caps. Thanks
  14. The Oil Soup
    Can anyone give me some help as to what these are and how they install on the motor. I dropped the oil pan because I wasn't getting oil pressure, cleaned out the sludge, reinstalled oil pan. I am now getting oil pressure when I crank the motor. Checked the manual but don't see a reference for these. B4B 218 Thanks
  15. The Oil Soup
    Here is a chart that should help . http://www.moog-suspension-parts.com/Universal_Outer_Tie_Rod_Ends.asp
  16. The Oil Soup
    That looks like it ought to be on Paul's truck.
  17. The Oil Soup
    Under 6' on my B4B
  18. The Oil Soup
    I picked up a Champion Radiator on ebay for slightly over $200 part # CC4749
  19. The Oil Soup
    What do they call the male version of a Cougar? A sugar daddy!
  20. The Oil Soup
    Hey Jeff, Mark at San Bernardino Glass has the patterns and the glass in any flavor you would like. Less than an hour from you, PM if you're interested. Gary
  21. The Oil Soup
    The window rubber from Steele is an excellent fit but not inexpensive.
  22. The Oil Soup
    .....and on earth peace, goodwill toward men.
  23. The Oil Soup
    I vote for the 53
  24. The Oil Soup
    Mine is a 53 titled/registered as a 52. Those are definitely 53 rear fenders and dash. Should say B4B on the ID plate (driver's door jamb).
  25. The Oil Soup
    Hey Jeff, where did you get the oil filler cap. Looks great. Gary
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use