knuckleharley Posted March 22, 2017 Report Posted March 22, 2017 4 hours ago, casper50 said: hydrographic dipped and then coated with auto clear coat. What is hydrgraphic,and is clear coat hard enough for dash and garnish mouldings? Quote
casper50 Posted March 22, 2017 Author Report Posted March 22, 2017 Yes it's tough enough if you get good stuff. 1 Quote
falconvan Posted March 22, 2017 Report Posted March 22, 2017 They are pretty proud of those rubber sill plates when I priced them. I'm going to take a stab at making some. Quote
Silverdome Posted March 23, 2017 Report Posted March 23, 2017 19 hours ago, falconvan said: They are pretty proud of those rubber sill plates when I priced them. I'm going to take a stab at making some. Are you gonna do a tech article? Quote
falconvan Posted March 23, 2017 Report Posted March 23, 2017 Yeah, I could. Let me see how good they come out first. 1 Quote
knuckleharley Posted March 23, 2017 Report Posted March 23, 2017 13 minutes ago, falconvan said: Yeah, I could. Let me see how good they come out first. Chicken! Quote
falconvan Posted March 24, 2017 Report Posted March 24, 2017 Yeah, I don't want to post it if it's a dismal failure! 1 Quote
classiccarjack Posted March 27, 2017 Report Posted March 27, 2017 On 3/24/2017 at 11:02 AM, falconvan said: Yeah, I don't want to post it if it's a dismal failure! You could always document each try and post only the successful one... LOL Quote
DonaldSmith Posted March 27, 2017 Report Posted March 27, 2017 Show us your failures. We can share in your learning experience. 1 Quote
falconvan Posted March 28, 2017 Report Posted March 28, 2017 15 hours ago, DonaldSmith said: Show us your failures. We can share in your learning experience. Don't have my material yet but I'll post some pictures when I get them together. Quote
casper50 Posted March 31, 2017 Author Report Posted March 31, 2017 Getting closer all the time. Both sides are done just looks the same. 3 Quote
Niel Hoback Posted March 31, 2017 Report Posted March 31, 2017 That looks spectacular! Beautiful. Quote
Don Coatney Posted April 1, 2017 Report Posted April 1, 2017 I wonder why my D-24 has round pedals and your D-24 has square pedals? I have the economy model with minimum side chrome. Quote
casper50 Posted April 1, 2017 Author Report Posted April 1, 2017 Don mine came with the same pedals as yours. The ones I have now are new from Andy Bernbaum. Quote
Silverdome Posted April 3, 2017 Report Posted April 3, 2017 Hey Casper, is that one of those new autonomous vehicles they're raving about? I see it has no steering wheel so I just figured it was. No, seriously it's looking really good. Quote
casper50 Posted April 3, 2017 Author Report Posted April 3, 2017 much easier to work inside without the steering wheel. lol Quote
Cudan Posted April 27, 2017 Report Posted April 27, 2017 hi Casper, looking good, what kind off material dit you use on the side and floor ? Dan Quote
casper50 Posted April 27, 2017 Author Report Posted April 27, 2017 Floor is a thin spray glue down "trunk lining". Used shower stall wall plastic for the curved parts and panel board for the flat. Glued 1/2" foam on them and then the vinyl. 1 Quote
casper50 Posted May 4, 2017 Author Report Posted May 4, 2017 Had some time to do a walk around last night. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.