BeBop138 Posted July 6, 2012 Report Share Posted July 6, 2012 Input--ideas on location of seat belts---how many inches spacing. Pics of seats show the foot shelf and if you ran them in the space between the seats you lose that area----no big loss.Would have to do some creative cutting of some sort to slot them ---the curved part above the foot rest is metal. Just trying to have a nice and neat install. Looks like you will see them any which way you do it.Maybe go thru gap between the seats down thru the foot rest towards the inside? Pics of what you did? Quote Link to comment Share on other sites More sharing options...
greg g Posted July 6, 2012 Report Share Posted July 6, 2012 look for a place where the floor is two thickness of sheetmetal. Also check out Juliano's website, they sell anchor plates specifically designed for seat belt attachment. Thicker and stronger than fender washers. DO NOT be tempted to mount the belts to the frame. You want to be with the body should they seperate in a crash. Don;t wnat the body passing by you while you are strapped to the suddenly stationary frame. If you get my meaning.... http://www.julianos.com/anchor_plate.html Quote Link to comment Share on other sites More sharing options...
BeBop138 Posted July 6, 2012 Author Report Share Posted July 6, 2012 look for a place where the floor is two thickness of sheetmetal. Also check out Juliano's website, they sell anchor plates specifically designed for seat belt attachment. Thicker and stronger than fender washers.DO NOT be tempted to mount the belts to the frame. You want to be with the body should they seperate in a crash. Don;t wnat the body passing by you while you are strapped to the suddenly stationary frame. If you get my meaning.... http://www.julianos.com/anchor_plate.html I figured I would have to put an extra plate plus the anchor plate, the sheet metal is one layer there. Thanks for the tip.......Lee Quote Link to comment Share on other sites More sharing options...
Young Ed Posted July 6, 2012 Report Share Posted July 6, 2012 I just used the julianos plates in my 48. Very happy with 1 minor complaint. 7/16s bolts are supplied but came with 1/2 in washers( or really poor fitting ones). So be prepared for possibly buying some better washers. Quote Link to comment Share on other sites More sharing options...
BeBop138 Posted July 6, 2012 Author Report Share Posted July 6, 2012 I just used the julianos plates in my 48. Very happy with 1 minor complaint. 7/16s bolts are supplied but came with 1/2 in washers( or really poor fitting ones). So be prepared for possibly buying some better washers.Otay-panky:D Quote Link to comment Share on other sites More sharing options...
Robert Horne Posted July 6, 2012 Report Share Posted July 6, 2012 Some seat belts are very uncomfortable, so you may need a test person to help test the belts for a good fit. Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted July 6, 2012 Report Share Posted July 6, 2012 it would take a bit to test fit the shoulder belt to fit and route proper but I assure I would be up to the task.. Quote Link to comment Share on other sites More sharing options...
Young Ed Posted July 6, 2012 Report Share Posted July 6, 2012 it would take a bit to test fit the shoulder belt to fit and route proper but I assure I would be up to the task.. Now Tim you should know better than to send an old man to do a young mans job. Quote Link to comment Share on other sites More sharing options...
randroid Posted July 6, 2012 Report Share Posted July 6, 2012 Gents, That woman is deformed! -Randy Quote Link to comment Share on other sites More sharing options...
BeBop138 Posted July 6, 2012 Author Report Share Posted July 6, 2012 Gents,That woman is deformed! -Randy Maybe if you rubbed enough the swelling would go down:D Quote Link to comment Share on other sites More sharing options...
Niel Hoback Posted July 7, 2012 Report Share Posted July 7, 2012 I volunteer to be a seat belt. And shoulder belt. Shoot, I'll be a 5 point belt if she wants! Quote Link to comment Share on other sites More sharing options...
Robert Horne Posted July 7, 2012 Report Share Posted July 7, 2012 Gents,That woman is deformed! -Randy With seat belt laws, and "distraction" laws for using cell phones for talking, or texting, this girl may fall under the "distraction" category... I feel sorry for the guy that would have to sit next to her on a 12 hour flight to Shanghai...:rolleyes: Quote Link to comment Share on other sites More sharing options...
Adam H P15 D30 Posted July 7, 2012 Report Share Posted July 7, 2012 I mounted my front lap belts to the seat frame. They move with the seat and the frame is robust enough and bolted to a reinforced part of the body. Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted July 7, 2012 Report Share Posted July 7, 2012 more and more later model cars have at least the lap belt part connected to the seat..it is so on the buckets I installed in the bz cp..totally erases the problem of a moving seat and stationary belt..however the seat frame and contact points to the floor board have to be quite robust..the rear anchor will most likely align with the cross brace that ties the inner rockers..did so in my application...this will give you great strength.. Quote Link to comment Share on other sites More sharing options...
claybill Posted July 7, 2012 Report Share Posted July 7, 2012 somehow that picture is all over the internet.....my sister is reaLLY UPSET.! Quote Link to comment Share on other sites More sharing options...
rumble48 Posted July 8, 2012 Report Share Posted July 8, 2012 Anyone had any experience installing a 3 point belt? the floor portion seems straight forward, but I could use some tips on the shoulder belt placement in a 2dr coupe..... Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted July 8, 2012 Report Share Posted July 8, 2012 it depends on the seat arrangement..s the seat is movable and the belt contact is stationary..bench seats are not that easy to adapt for a movable belt..a stationary long belt is not comfortable...I personally do not care for a slip belt..the shoulder mount and basic retractor is a walk in the park..first decided the attachment of your inboard lap belt 1 Quote Link to comment Share on other sites More sharing options...
Frank Elder Posted July 8, 2012 Report Share Posted July 8, 2012 I like the set up that was in a few of my 70's mopars....lap belt with optional shoulder harness attatchment. Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted July 8, 2012 Report Share Posted July 8, 2012 yeah Frankie..I can still see these in my mind..I know the 69 and up through the 72 had these..the shoulder belt stored above and along the headliner..the elastic retainer section of the belts do die in time and look like hang..other than that..they were a part of history for sure..I saw one of these not long ago in a car at the wrecking yard..kinda grinned a bit when I saw it..I had most forgotten about the set up till I saw it in the car.. Quote Link to comment Share on other sites More sharing options...
BeBop138 Posted July 8, 2012 Author Report Share Posted July 8, 2012 it depends on the seat arrangement..s the seat is movable and the belt contact is stationary..bench seats are not that easy to adapt for a movable belt..a stationary long belt is not comfortable...I personally do not care for a slip belt..the shoulder mount and basic retractor is a walk in the park..first decided the attachment of your inboard lap beltIf I remember did some of the belts have a retractor for both sides---would this work? Even if you had to modify by re-sewing the ends--then the floor placement would not be as big an issue.......Lee Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted July 8, 2012 Report Share Posted July 8, 2012 most of the early front seats had the slip through liners between the seat cushion and the seat back..this allowed the seat to move..the position of the buckle over the belly was determined by the seat position...often the buckle was in an annoying position not like off to the side like todays improved setups..again it goes back to what you have to work with on hand, want to buy and or can tolerate in comfort..I admit to modifying my cars..no secret about it...I never bought them for to keep original..the bz cp has the front and center console metal of the donor Dakota blended into and welded to the original floor..the seat of the Dakota, buckets have the lap connection part of the seat itself..heavy metal here and also super reinforced floor pan..go to a wrecking yard and walk about getting ideal and such;..you may find a nice setup there that would be of service to you..most folks, me included buy my belts here from cars not involved in a crash and have had their interior protected by rolled up glass so no rain has rotten the fabric or rust started on the retractor mechanisms.. Quote Link to comment Share on other sites More sharing options...
40P10touring sedan Posted July 8, 2012 Report Share Posted July 8, 2012 Some seat belts are very uncomfortable, so you may need a test personto help test the belts for a good fit. Daaaaaang, I don't know about you gents, but there'd be no driving as far as the car was concerned with her in my car...and seat belts would just get in the way! Quote Link to comment Share on other sites More sharing options...
40P10touring sedan Posted July 8, 2012 Report Share Posted July 8, 2012 somehow that picture is all over the internet.....my sister is reaLLY UPSET.! Ok, now I really want to drive over to your place...oh, make sure your sis is there, ok?!!!!!!!! BTW...she like sticks or automatics...I got the stick covered.......uhm.....and a 6v battery still if she likes autos...I'd be good either way...... Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted July 8, 2012 Report Share Posted July 8, 2012 what makes you think we are going to believe that seat belt is not needed to keep her from running away...inquiring minds want to know..odds are are no matter how good they look, somebody somewhere is sick and tired of her attitude.. Quote Link to comment Share on other sites More sharing options...
40P10touring sedan Posted July 8, 2012 Report Share Posted July 8, 2012 Sorry, I'll stop thinking with the "other head"..... Lee, you know that the seat is where you want it to drive, as in comfortable position...I'd doubt you'd move it unless your wife is gonna drive it, so find a spot where the retractor can fit, maybe just behind the bottom back of the front seat and you'd be all set? Me, I'd go with the slip type belts as they are thinner, mounting area wise...my 40 is a narrower cab than your 50 era's, so side room is an issue for me. I've already got the place set in my head where I want the shoulder belt high attachment at for the front and even the rear seat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.