Jump to content

Brake/Clutch Pedal shaft bushings


Recommended Posts

Posted

Brake pedal on my C39 New Yorker squeaks and when I greased it I found that there was play in the shaft. It looks like a replacement shaft is available but I cant find the bushings.

Does anyone know where these can be obtained?

Posted

Try Andy Bernbaum he list the two half bushing that go into the end of the torque tube and I think they are around $5 each.

 

Rich Hartung

Posted

Thanks very much I was afraid that I would have to get them fabricated and it would be difficult to get them to fit.

Posted

I am going to take the assembly apart this weekend if I have time - the drawing in the parts list shows the bushing as one piece. perhaps we are talking about two different things. I will see if I can provide diagram om what I am referring to.

Posted

If these are the 2 piece diecast metal bushings that fit around the "ball" ends here in Oz our Oz Chrysler Valiants used the exact same 2 piece bushings in our mid 60's Valiants till the last of them in 1981, made of white nylon these were an exact copy of the alloy diecast ones and I wouldn't be surprised if the same things were used in the US cars...........andyd

Posted

I took a snap shot of what I think you are looking for refer to number 30. Hope this helps you identify the part. Taken from My MoPar 37-52 Tristate dealers catalog.  This is why parts catalogs are so important in this hobby. i cannot stress the importance of purchasing parts catalogs to help keep your car running.

 

Rich Hartung

Desoto1939@aol.com

 

 

image.png.cc726b7785f3d4d9ae8df17269c48f17.png

 

image.png.8f84969447aa8106b5e37c0dbdc292d1.png

Posted
1 hour ago, andyd said:

If these are the 2 piece diecast metal bushings that fit around the "ball" ends here in Oz our Oz Chrysler Valiants used the exact same 2 piece bushings in our mid 60's Valiants till the last of them in 1981, made of white nylon these were an exact copy of the alloy diecast ones and I wouldn't be surprised if the same things were used in the US cars...........andyd

 

 

That would be mopar part number 2265938

Posted

The brake pedal bushing fot your C39 1946-48 Chrysler "8"...part # 385386 AMS MoPar in Georgia might have it Harvie...

Make sure you tell the seller the over all width of your bushing..

Have them check the width of the one they are selling too.

20230310_200243_fPn2oocS7g.jpeg

20230310_200219_pfZVb5vz5N.jpeg

  • Like 1
  • Thanks 1
Posted

Methinks I misundertook the question.......the clutch pedal bushing are not the brake pedal bushings that were originally asked about........I'll go sit in my corner now......lol.......andyd

Posted

@andyd you just need to drive a truck .... they did not have a bushing....

I was going to report this in this thread ..... those rascally Chrysler fellas did add a clutch pedal bushing.

 

Andy just sell your car & get a truck, you will be a happy camper.

Posted

Nah.........after 51 yrs the car is part of the family.........tho' I did buy a 2014 Falcon Ute as my daily driver.....its sort of a truck.....lol.........andyd 

Posted

Thanks very much everyone - I'll see what I can find in the morning when the shops open. Sorry for the confusion.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use