Doug&Deb Posted September 22, 2020 Report Posted September 22, 2020 I’m confused. The choke assembly I bought at the swap meet seems to be opposite of mine. I wasn’t aware that there was more than one variation of these. When I say opposite I’m referring to the arm facing the opposite direction. Quote
Young Ed Posted September 22, 2020 Report Posted September 22, 2020 Yup there are 2. I believe there were setups that mounted to either pad on the manifold. Quote
Doug&Deb Posted September 22, 2020 Author Report Posted September 22, 2020 Oh well, it’s still a good score. Someone may need it in the future. Quote
Dodgeb4ya Posted September 22, 2020 Report Posted September 22, 2020 (edited) Maybe you have a very hard to find 1949 to 50 Chrysler eight choke unit. Google images can be used at times to see what ya got. Edited September 22, 2020 by Dodgeb4ya Quote
Hamilton Posted September 22, 2020 Report Posted September 22, 2020 1 hour ago, desoto1939 said: OK so when you are looking at the choke and you have the hole for the wire at the hole for the wire is at 6 o-clock and the unit is facing towards 12 o-clock canyou tell me on what side is the lever right or left. It took me fifty years, but I finally found the guy who tortured me as a high school freshman by coming up with the question about one train leaving Chicago at 11:00 AM, traveling westbound at 60 mph, and another leaving Los Angeles at 4:00 PM, traveling eastbound at 85 mph ... Sorry, Rich, couldn't resist. _ 1 Quote
Plymouthy Adams Posted September 22, 2020 Report Posted September 22, 2020 45 minutes ago, Hamilton said: It took me fifty years, but I finally found the guy who tortured me as a high school freshman by coming up with the question about one train leaving Chicago at 11:00 AM, traveling westbound at 60 mph, and another leaving Los Angeles at 4:00 PM, traveling eastbound at 85 mph ... Sorry, Rich, couldn't resist. _ the answer is simple...Covid assures both are burning fuel at a ridiculous rate given the fact there is little cargo onboard as there are no ground handlers, no mail being moved and precious few passengers... Quote
desoto1939 Posted September 22, 2020 Report Posted September 22, 2020 Here is a picture of the sisson 8 cylinder choke and early plymouth desoto chrylser choke. The first two shows how the top cover comes off the choke body and then the adjusting tool is inserted into the body to make the proper adjustment. I have this really rare tool. I have shown this to the airflow club members at the Hershey swap meet and they have never seen the tool or even knew it exists. The last two show the top and side views of the choke. These pictures were taken from my Sisson Choke presentation at the AACA annual meeting and lecture series. Also showing is the Sisson Tool kit and adjusting tools the tool with the flat piece of steel and the wire is the tool used to adjust the 8 cylinder sisson choke. The wire with the loop is the tool used to setup the smaller sisson choke found on the 6 cylinder engines i also have several of these rods and also a manual that lists which sisson choke model was used on specific cars and it also has the information about the choke rods lengths and bends that were used along with the appropriate MoPar number The top picture is the Sisson Testing stand that was used to verify that the sisson choke is and was working correctly. I also have this original stand. This the only one that I have seen and I display this at Hershey every year and people want to purchase it You can cee the testing and setup pin tool in the background of the stand. Rich Hartung desoto1939@aol.com Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.