mrtillie Posted October 2, 2016 Report Share Posted October 2, 2016 Im looking to start getting parts for my winter project. Thought id ask here for any suppliers of floor pans and sills. Quote Link to comment Share on other sites More sharing options...
casper50 Posted October 2, 2016 Report Share Posted October 2, 2016 (edited) lots of places sell them. Some are a better fit than others. I went a different route. I found a coupe in a scrap yard and had them cut from the middle of the rear wheel well to the firewall, 18" high and 18" of floor. Both sides. They fit perfectly. Had a couple of small rust spots that were easy to fix. Total cost was $150. I'd check yards in the southwest for rust free parts. Welcome to the forum by the way. Here's my thread if you want to check the photos. Edited October 2, 2016 by casper50 1 Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted October 2, 2016 Report Share Posted October 2, 2016 Can't give you advise on the floor pans,but that car of yours sure was a major score. I wish I were smart enough to buy project cars that look that nice. BTW,where is "SK"? Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted October 3, 2016 Report Share Posted October 3, 2016 If I were a guessing man I would say Sasquatchaton Canada Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted October 3, 2016 Report Share Posted October 3, 2016 5 minutes ago, Plymouthy Adams said: If I were a guessing man I would say Sasquatchaton Canada Probably a lot closer than my first guess,which was South Korea. Quote Link to comment Share on other sites More sharing options...
DonaldSmith Posted October 4, 2016 Report Share Posted October 4, 2016 Maybe it's "AK", Alaska, instead of "SK". Only one keystroke different. I frewurntlu have troublr hitting the wronh keys. Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted October 4, 2016 Report Share Posted October 4, 2016 look closer at the front tag on the beast.... Quote Link to comment Share on other sites More sharing options...
mrtillie Posted October 4, 2016 Author Report Share Posted October 4, 2016 On 10/2/2016 at 1:46 PM, knuckleharley said: Can't give you advise on the floor pans,but that car of yours sure was a major score. I wish I were smart enough to buy project cars that look that nice. BTW,where is "SK"? lol Saskatchewan, Canada. Quote Link to comment Share on other sites More sharing options...
uglysteve Posted October 4, 2016 Report Share Posted October 4, 2016 I thought the Dodge's had the fade away type front fenders that went into the doors? Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted October 4, 2016 Report Share Posted October 4, 2016 (edited) Depends on the year. My 1942 doesn't. Edited October 4, 2016 by knuckleharley Quote Link to comment Share on other sites More sharing options...
Don Coatney Posted October 4, 2016 Report Share Posted October 4, 2016 55 minutes ago, uglysteve said: I thought the Dodge's had the fade away type front fenders that went into the doors? American D-24's have the fade away fenders. Canadian D-25's do not as they used a Plymouth body with Dodge badging. Quote Link to comment Share on other sites More sharing options...
ptwothree Posted October 4, 2016 Report Share Posted October 4, 2016 Get some 18 ga. and make your own. It's a nice project that no one will see. Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted October 4, 2016 Report Share Posted October 4, 2016 1 hour ago, ptwothree said: Get some 18 ga. and make your own. It's a nice project that no one will see. Plus it will give you the excuse you need to buy shears,a bead roller,and a MIG welder. That right there is reason enough to make your own. Of course,you would need the MIG welder to weld in any store-bought panels,so that one is a wash. 2 Quote Link to comment Share on other sites More sharing options...
uglysteve Posted December 24, 2016 Report Share Posted December 24, 2016 On 10/4/2016 at 2:11 AM, Don Coatney said: American D-24's have the fade away fenders. Canadian D-25's do not as they used a Plymouth body with Dodge badging. Oh wow I never knew that! That's pretty cool. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.