Charlie Stephenson

Don't touch it --- drive it every where except during weather where some out of control vehicle could slide into it. " that's an order " In my onion it is a beauty as is. Enjoy it. Charlie Stephenson

I haven't Got that far yet; But I just had an idea that if the wind shield glass was cut bigger , would that help ? Even if you would have to relieve the seam to allow for the larger wind shield ??? I'm just sating. Charlie Stephenson

"O" by the way they need to have 6 hand holes. Charlie Stephenson. Any one have a B 3 A 130 Drive shaft.

If you have any 20" X 7.5" wide ball and socket wheels ? I need two, single split ring wheels. Charlie Stephenson 5152767877

Get a vacuum gage, connect it to the diaphragm with a long hose, observe when the shift occurs, I'm just saying, never got either of my two speeds working "YET" been comfortable with what ever gear they are stuck in (default ?). Charlie Stephenson

What about the Four Door ? I found a COE / Cab Forward, May buy it - if Ruth Approves parking our driver in the street lol. Charlie Stephenson.

It all understandable, with a little explanation, no substrate = no lock. That is easy to understand. Charlie Stepenson

Great Stich. Going to do the lock ? Charlie Stephenson ( smart ass)

Don't send those blocks to the scrap pile yet. 515-276-7877 Charlie Stephenson

Great presentation on LNS, Fernando Mendes. What a fitting end to a great discussion by all, hope we all helped ya Fowl Jeff, I oven pre-heat all cast iron welding projects, takes a lot of time to bring up to temp and back down, I prefer lock and stich, cold welding - to many things can go wrong real fast. Charlie Stephenson

right - but it sure makes it interesting when the key board blurs and what appears on the screen stops you cold in your tracks and Ruth says " u still up" lol. Charlie Stephenson

I just found GREYGOOSE interesting site. Charlie Stephenson

Thank you gentlemen, this is the kind of sharing that really helps. Charlie Stephenson

Merle Coggins, Thanks, this is a big help for all of us. Charlie Stephenson

Hello WarriorDog and Fernando Mendes I appreciate you guys stepping up and helping, this hunting for a block is the way to go, I'm sure Fowl Jeff ( & me ) need all the help and support we can muster from fellow blogger's to encourage us on to victory past these forks in our roads. counselling meetings are on Sunday after noon's, advice is free. crazy Charlie Stephenson

That's me job; sparking comments lol, stitching works well I've stitched gears on machinery and even my trolling motor ratcheted pivot worked great, finding a block is always the best way and should only be paid for upon your approval of no cracks - may take several try's as the 25" seams to be prone to cracking, my molly blocks don't have that problem, but talk about hard to find - try a 281,306,377,413 molly block (30"). I'm still searching for a 281 & a 413 molly block any condition. Cracked cylinders and valve seat to valve seat or even valve seat to water jacket - not impossible to repair "just takes longer" lol. Cheer up push on and you'll find a good block soon, if you haven't already found it. They are out there, Try Mike at AMS (e-bay seller). Charlie Stephenson

Thank You. I need a Drivers door for a 1953 Dodge Truck B 4 YX, I under stand the cab doors are all the same in 1953. Will you look on Craig's list to help me, I'm not familiar with how to be effective at searching Craig's List, I would appreciate some help from your expertise, Thank You. Charlie Stephenson

I weld block cracks in sand casting holes, also used to sometimes remove casting super structure wire reinforcements wires - head cracks - transmissions. NOT cast iron 3rd members. My policy is u - ship I quote - I repair - you pay u=ship to pick the item from me - you install - at 250 miles on my repair and your approval, I invoice you on Pay Pal you pay me in 24 hours, I reserve the first right of rejection upon receipt on your welding project as you reserve the first right of rejection of my quote lol. Charlie Stehenson

Mark do you have a 25" complete combo ? Charlie Stephenson, I'm looking a 1948 COE 100% complete haven't seen pics yet but here its rust and dent free I'll see. .

I have two two speed rear end trucks B 4 YX & B 3 YA.

I can use it and need it and would like to have it but only if I can afford it. Charlie Stephenson 5152767877

convert R$ to USD please

If I recall, there is a difference in the hole in the crank that may or may not match your converter, sorry I don't recall the particulars, but this is something you'll want to research. Charlie Stephenson

It's not the pattern who sources the bulk material ? Charlie Stephenson ah Mark will know.

Young Ed, I can count three versions. Granny/Great Granny non syncro - granny 2,3,4,5 Grinder & 1,2,3,4,5ov. Am I close or been looken up at numbers to long ?