Jim Saraceno Posted March 18, 2008 Report Posted March 18, 2008 This winter's project was to go through the whole fuel system from tank to carb. Saturday, I finally got the new fuel lines finished and decided I would start the car up and then check for leaks. I go to put the key in the ignition and there is a piece of tape over the keyhole with a label that said "oil gauge". I looked at that and remembered that back in November when I took things apart, I removed the gauge cluster that contains the fuel gauge, ammeter, water temp meter and oil pressure gauge. When I did that I thought to myself..."I'm just stupid enough to forget to put the gauge cluster back in before I start the car and oil will come shooting out the tube spraying the inside of my car." Sure enough, 5 months later I'm trying to start up the car with the gauge cluster still sitting on the work bench:eek: So, like I said, I'm pretty smart to realize just how dumb I am! Quote
oldmopar Posted March 18, 2008 Report Posted March 18, 2008 Jim, you do have a good memory I would have not figured out what that sign meant until had a face full of oil. ed Quote
Jim Saraceno Posted March 18, 2008 Author Report Posted March 18, 2008 Well Ed, you know what they say... "The memory is the second thing to go.... I can't remember what the first is". Quote
Plymouthy Adams Posted March 18, 2008 Report Posted March 18, 2008 I would have put the key somewhere..somewhere I could not find it and then in a moment of frustration of not finding the key...hot wire it and shoot oil everywhere..actually I am a compulsive list maker with thing to cross as I go... Quote
mackster Posted March 18, 2008 Report Posted March 18, 2008 Glad your face is free from oil... I know your way smarter than me I would have never taped the ignition....I would have tried to turn the car on twice or maybe three times before I figure there's oil everywhere... I'm a little S L o w. Quote
blueskies Posted March 18, 2008 Report Posted March 18, 2008 ... So, like I said, I'm pretty smart to realize just how dumb I am!... The bad news is, I think you have early-onset Alzheimers. The good news is, you'll never know it. Pete Quote
greg g Posted March 18, 2008 Report Posted March 18, 2008 So that tag on my Sprite Axle that says No Oil means its permanently lubed....right???? Quote
Don Coatney Posted March 18, 2008 Report Posted March 18, 2008 I thought permanently lubed was what happend to Irishmen yesterday:confused: Quote
Heavy Flat Head Posted March 18, 2008 Report Posted March 18, 2008 Do you mean that the squirting oil out of the dash is not mormal. Darn, my wife was right again. Ed. Quote
martybose Posted March 18, 2008 Report Posted March 18, 2008 Do you mean that the squirting oil out of the dash is not mormal. Darn, my wife was right again. Ed. When I was just out of the Navy, my first job was working in an International Harvester plant making class 8 trucks. One of my first jobs was cleaning out the cab of a unit that had two problems. The first was that the engine ran away when they first fired it, and the emergency shutdown wasn't hooked up. That would have been bad enough, the the oil pressure gauge hose was disconnected under the dash! Boy, was that a mess! Marty Quote
Don Coatney Posted March 18, 2008 Report Posted March 18, 2008 When I was just out of the Navy, my first job was working in an International Harvester plant making class 8 trucks. One of my first jobs was cleaning out the cab of a unit that had two problems. The first was that the engine ran away when they first fired it, and the emergency shutdown wasn't hooked up. That would have been bad enough, the the oil pressure gauge hose was disconnected under the dash! Boy, was that a mess!Marty Marty; Where was this IH plant located? I worked for IH in Fort Wayne, Indiana in the 60's Quote
Norm's Coupe Posted March 18, 2008 Report Posted March 18, 2008 The only time I ever forgot anything was when I forgot to remember to forget. Quote
martybose Posted March 18, 2008 Report Posted March 18, 2008 Marty;Where was this IH plant located? I worked for IH in Fort Wayne, Indiana in the 60's I worked at the IH plant in San Leandro, CA unitl it was closed; it's a shopping mall now! Marty Quote
Don Coatney Posted March 18, 2008 Report Posted March 18, 2008 I worked at the IH plant in San Leandro, CA unitl it was closed; it's a shopping mall now!Marty The IH plant in Fort Wayne was a flea market after it closed. I have not checked it out on my last few trips there so not sure if it is still standing. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.