dgrinnan Posted July 26, 2022 Report Share Posted July 26, 2022 (edited) I never ever thought this was a question I would have to ask. Where is the oil filler on a 218 flathead. Ignore the red arrow. Edited July 26, 2022 by dgrinnan Quote Link to comment Share on other sites More sharing options...
Desotodav Posted July 26, 2022 Report Share Posted July 26, 2022 It is inside the black canister (with the T-piece on top) towards the rear of the engine on your driver’s side. Quote Link to comment Share on other sites More sharing options...
dgrinnan Posted July 26, 2022 Author Report Share Posted July 26, 2022 So I remove the oil filter lid and pour the oil in there? Quote Link to comment Share on other sites More sharing options...
desoto1939 Posted July 26, 2022 Report Share Posted July 26, 2022 First take off the t handle you will see oil inthe canister. There should be a small metal ring that you use to pull out the filter. But you still need a new filter for the oil canister. The unit that you have is an original MopAr Canister oil filter element and they were made purolator. Drain the oil out of the oil pan first, Then remove old filter, use a basting tool to remoe th eold oil and clean out the inside of the canister with a clean rag. Insert the new filter and then pour some oil into the canister so as to cover the top of the filter. Put a new rubber gasket onto the top of the metal canister put on the lid tight down the lid and make sure it is tigh or oil will leak out the lid. Fill the engine with the appropriate amt of motor oil via the oil fill pipe. Check the level via the dip stick. Run the engine to check for any leaks and then check the level again. Always use a new metal washer on the oil pan drain plug. Simple job Rich Hartung desoto1939@aol.com Quote Link to comment Share on other sites More sharing options...
Young Ed Posted July 26, 2022 Report Share Posted July 26, 2022 To fill you remove the cap just behind the base of your red arrow. Only open the filter lid when changing oil and filter. 1 Quote Link to comment Share on other sites More sharing options...
kencombs Posted July 26, 2022 Report Share Posted July 26, 2022 FILLER not filter. Young Ed got the question and answer right. 2 Quote Link to comment Share on other sites More sharing options...
JBNeal Posted July 27, 2022 Report Share Posted July 27, 2022 8 hours ago, dgrinnan said: I never ever thought this was a question I would have to ask. Where is the oil filler on a 218 flathead. Ignore the red arrow. oil filler tube is between the generator and distributor... additional information - NOS oil filler caps additional information - DeLuxe JC Series Oil Filters Quote Link to comment Share on other sites More sharing options...
dgrinnan Posted July 27, 2022 Author Report Share Posted July 27, 2022 Okay, I suspected it was performing double duty as a breather and filler tube but wanted to confirm. Thanks everyone for the feedback. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.