MarcDeSoto Posted April 16, 2021 Report Share Posted April 16, 2021 I have an NOS Chrysler window crank with a plastic knob, but I don't know what car it fits. It has the Royal Crown logo on it, so I know it's for a Chrysler, but all of the 46-48 Chryslers I've seen, including the 50 Chrysler Windsor I used to drive in the 80s had an all chrome knob that could swivel and flip. So what does this plastic knob fit? Maybe it's for the quarter window or something, or maybe for the lower line Royal model? Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted April 16, 2021 Report Share Posted April 16, 2021 (edited) 1156238 is for 1946-48 lower line Royal and Saratoga cars. Edited April 16, 2021 by Dodgeb4ya 1 Quote Link to comment Share on other sites More sharing options...
MarcDeSoto Posted April 16, 2021 Author Report Share Posted April 16, 2021 Thanks Dodge! Was it just for the quarter windows, or was it for the front windows also? Quote Link to comment Share on other sites More sharing options...
joecoozie Posted April 16, 2021 Report Share Posted April 16, 2021 23 minutes ago, MarcDeSoto said: Thanks Dodge! Was it just for the quarter windows, or was it for the front windows also? It was for the front and rear windows Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted April 16, 2021 Report Share Posted April 16, 2021 As above ...all four windows. That info out of the 46-48 Chrysler factory parts book. Those are hard to find NOS. The higher line Windsor/ NewYorker Lavalier Lucite clear handles are 99.9% near impossible to find NOS.... Especially the shorter rear cpe and convert handles. Quote Link to comment Share on other sites More sharing options...
chrysler1941 Posted April 16, 2021 Report Share Posted April 16, 2021 Yes mine had these. Swapped them out with the luxury package with flippers and chrome indicator arm. Escutcheon are very rare. They look like other MoPars but are flatter. 1 Quote Link to comment Share on other sites More sharing options...
wagoneer Posted April 16, 2021 Report Share Posted April 16, 2021 (edited) I have the lucite flipper knobs but the metal bracket inside the flipper broke on one side. I was considering how that might be repaired reliably?! I found a site that sells the little pins that go inside ... need to find the link . only one is still on the handle, but three are loose. Thoughts on what kind of craftsman can repair the inside of the handle to stay back on the arm? Edited April 16, 2021 by wagoneer 1 Quote Link to comment Share on other sites More sharing options...
normanpitkin Posted April 16, 2021 Report Share Posted April 16, 2021 Im still looking after 3 years for the 41 CHRYSLER convertible rear window short flipper in the white plastic!! Quote Link to comment Share on other sites More sharing options...
chrysler1941 Posted April 16, 2021 Report Share Posted April 16, 2021 18 minutes ago, normanpitkin said: Im still looking after 3 years for the 41 CHRYSLER convertible rear window short flipper in the white plastic!! white plastic. got a photo? I have some different knob styles. Quote Link to comment Share on other sites More sharing options...
chrysler1941 Posted April 16, 2021 Report Share Posted April 16, 2021 1 hour ago, wagoneer said: I have the lucite flipper knobs but the metal bracket inside the flipper broke on one side. I was considering how that might be repaired reliably?! I found a site that sells the little pins that go inside ... need to find the link . only one is still on the handle, but three are loose. Thoughts on what kind of craftsman can repair the inside of the handle to stay back on the arm? I hade to buy 4 different broken ones to make 2. Plastic part was heated and removed showing the internals. One had pin but missing spring. Took a spring from a pen. Hope you can find the link. Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted April 17, 2021 Report Share Posted April 17, 2021 (edited) Dennis Bickford in New Mexico repairs/repaired the Town and Country flipper handles..1941 -50. I don't have his info anymore. He sells parts and some services for the T&C cars. He might have the handle parts too possibly. Edited April 17, 2021 by Dodgeb4ya 1 Quote Link to comment Share on other sites More sharing options...
joecoozie Posted April 17, 2021 Report Share Posted April 17, 2021 Dennis Bickford, PO Box 1132 LaLuz NM 88337-1132 575-443-1160 2 Quote Link to comment Share on other sites More sharing options...
wagoneer Posted April 18, 2021 Report Share Posted April 18, 2021 On 4/16/2021 at 9:13 PM, chrysler1941 said: I hade to buy 4 different broken ones to make 2. Plastic part was heated and removed showing the internals. One had pin but missing spring. Took a spring from a pen. Hope you can find the link. https://dcmclassics.com/home/612-i-180-door-and-window-handle-lock-pins.html also at 14x price https://www.ebay.com/itm/1947-1948-1949-1950-1951-1952-1953-1954-DESOTO-DOOR-HANDLE-WINDOW-CRANK-PINS-/323417125903 Somewhere recently someone was asking about the spacer around the horn button and had to make their own ... but I can’t find that reference . this site cbodies.com has a lot of great nos parts. http://www.cbodies.com/proddetail.php?prod=7226-BRT86 http://www.cbodies.com/prodimages/large/7226-BRT86-1.jpg Enlarge 1953 Chrysler and Imperial felt spacers that fit in steering wheel center, good used condition, package of 2 pieces 1 Quote Link to comment Share on other sites More sharing options...
chrysler1941 Posted April 18, 2021 Report Share Posted April 18, 2021 5 hours ago, wagoneer said: https://dcmclassics.com/home/612-i-180-door-and-window-handle-lock-pins.html also at 14x price https://www.ebay.com/itm/1947-1948-1949-1950-1951-1952-1953-1954-DESOTO-DOOR-HANDLE-WINDOW-CRANK-PINS-/323417125903 Somewhere recently someone was asking about the spacer around the horn button and had to make their own ... but I can’t find that reference . this site cbodies.com has a lot of great nos parts. I thought when you said pins, it was the flipper pin that makes them flip. This one for the square, just use Slotted Spring Pins Quote Link to comment Share on other sites More sharing options...
wagoneer Posted April 18, 2021 Report Share Posted April 18, 2021 3 hours ago, chrysler1941 said: I thought when you said pins, it was the flipper pin that makes them flip. This one for the square, just use Slotted Spring Pins Hmm, I thought they were those too. looks like the one spare pin I do have. I’m away from home for a while so I can’t look, but the flipper itself had a couple of metal slots that the handle goes into, and there is a pin that holds the whole bit together. Looked a lot like these... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.