Los_Control Posted October 9, 2016 Report Posted October 9, 2016 I have a question about selectrolux. This here is a 1952 B3B. Right next to the gas pedal rod, is a tag with mismatched screws on the floor. My google fu has let me down with this, I have searched in this forum and H.A.M.B. along with google, finding nothing bout selectrolux. there is a s, under the flathead screw. At this point, am thinking just a trick some old geezer did years ago, used the metal tag to hold down the padded flooring, Is up above us now laughing his butt off while I research this. Any input on this tag? Quote
Todd B Posted October 9, 2016 Report Posted October 9, 2016 if you take the S off it becomes a vacuum cleaner 1 Quote
Todd B Posted October 9, 2016 Report Posted October 9, 2016 I am still on earth and laughing my but off at you. Quote
Los_Control Posted October 9, 2016 Author Report Posted October 9, 2016 BWAAAHAAHAA, I knew it! Love your handle, it did pop up a few times in my searches, almost mentioned you in the original post. Quote
Dodgeb4ya Posted October 10, 2016 Report Posted October 10, 2016 5 hours ago, Todd B said: if you take the S off it becomes a vacuum cleaner And if an old one a damn good one too! I like model G's! Quote
ssnowden Posted October 15, 2016 Report Posted October 15, 2016 What does it say under selectrolux on the tag? Quote
Los_Control Posted October 15, 2016 Author Report Posted October 15, 2016 Hoping to get back over there tomorrow to work on it some more. Raining today and going crazy stuck inside with nothing to do. So I am restoring the cloth wiring on my heater motor, with thread and the wifes nail polish Tomorrow I will remove the tag and get a better look at why it is there.. selectrolux sounds familiar, probably because of electrolux. And dodge had so many different shifting options with push button and lever on the dash, fluid drive ... selectrolux fooled me as another shift option. Just took the photo and figured would google it later and find something more on it.. At this point, it seems like something Hokey, that a previous owner did. Quote
Dodgeb4ya Posted October 15, 2016 Report Posted October 15, 2016 The reason that tag is screwed to the floor next to the gas pedal rod is of course to stop the gas pedal from pushing over to the right and losing capability of full throttle. The two ball holes in the bottom of the pedal or the two floor pan ball studs are worn and or damaged and won't keep the gas pedal straight up. 1 Quote
Los_Control Posted October 15, 2016 Author Report Posted October 15, 2016 That makes sense! You can even see a 1/2 round indentation on the tag, where the linkage rod has worn, while riding on the tag. That make perfect sense to me and sure you are correct. Thank you Quote
pflaming Posted October 23, 2016 Report Posted October 23, 2016 PDF]Electrolux Ew30ef65gs Use And Care Selectrolux 192.241.186.66 › doc › electrolux-ew30... electrolux ew30ef65gs use and care manual selectrolux user manual electrolux ew30ef65gs use and care manual. Quote
The Oil Soup Posted October 27, 2016 Report Posted October 27, 2016 I think it's perfectly appropriate at this time for me to state the obvious.......Electrolux really sucks! 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.