David A. Posted December 1, 2015 Report Posted December 1, 2015 Has anyone replaced the bead material around the windshield garnish molding? If so, how did you hold it in place while you tightened everything down, particularly around the defroster vent area? Any help would be greatly appreciated. Quote
Brent B3B Posted December 1, 2015 Report Posted December 1, 2015 Hi David, do you have a photo? I can't say I have see that bead material before. I thought the garnish pushed up against the windshield rubber..... Quote
David A. Posted December 1, 2015 Author Report Posted December 1, 2015 I don't have a photo of it, but when I get home this evening I will look in some of my literature. I know I have seen it listed somewhere. It looks like the same material older cars used between the fenders and body. The bead goes between the windshield molding and the dash and other metal surfaces. I'm not sure how many years they did this. Quote
ggdad1951 Posted December 1, 2015 Report Posted December 1, 2015 I don't have a photo of it, but when I get home this evening I will look in some of my literature. I know I have seen it listed somewhere. It looks like the same material older cars used between the fenders and body. The bead goes between the windshield molding and the dash and other metal surfaces. I'm not sure how many years they did this. my 51 had none Quote
Dodgeb4ya Posted December 1, 2015 Report Posted December 1, 2015 (edited) It's a B1 B2 trim only... Edited December 1, 2015 by Dodgeb4ya 2 Quote
JBNeal Posted December 1, 2015 Report Posted December 1, 2015 (edited) Additional Information - Window Frame Welting Edited August 27, 2021 by JBNeal revised link 1 Quote
Dodgeb4ya Posted December 1, 2015 Report Posted December 1, 2015 Simple enough to make up if you or someone can sew... 1 Quote
David A. Posted December 1, 2015 Author Report Posted December 1, 2015 Thanks to everyone for the replies and pictures. I have my glass in, and hopefully can get the frame in this week. Quote
Jeff Balazs Posted December 2, 2015 Report Posted December 2, 2015 Roberts Motor parts sells this item. Jeff Quote
HanksB3B Posted December 3, 2015 Report Posted December 3, 2015 Roberts Motor parts sells this item. Jeff It's just cut down fender welt. When cut/trimmed I believe the web is about 1/2" wide. It's tough stuff so marking with an ice pick and then using a Harbor Freight Hole Punch Kit will work like a charm an old single hole paper punch would probably do the trick. Good Luck, Hank Quote
MBF Posted December 4, 2015 Report Posted December 4, 2015 I'll go along with what Hank said as a solution. I vaguely recall the material somehow being stapled or pinned to the trim pieces, but I'm not sure. I didn't use anything when I put mine together years ago. Mike Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.