rockable Posted May 8, 2010 Report Posted May 8, 2010 Does anyone make a universal wiring harness with heavy gauge wires for a 6 volt car? Any recommendations? Quote
1950 Special Deluxe Posted May 8, 2010 Report Posted May 8, 2010 I am eavesdropping on this post. Hope you don't mind. I am almost to this point. Quote
Barabbas Posted May 9, 2010 Report Posted May 9, 2010 I've seen a couple on the internet- here's one--http://stores.ez2wire.com/-strse-37761/AMC-Jeep-Chevy-Chevrolet/Detail.bok Quote
rockable Posted May 9, 2010 Author Report Posted May 9, 2010 (edited) I don't want to pay for a ynz or RI harness. In fact, I don't want cloth covered wire. I was hoping that someone like Painless, etc. made a universal harness that might work and that someone had experience with it. Barabbas,that's what I'm talking about. Thanks. Edited May 9, 2010 by rockable Quote
greg g Posted May 9, 2010 Report Posted May 9, 2010 I have seen some basic hotrod harnesses with 8 or 10 circuits (probably more than enough for our cars/trucks) but they were all gauged for 12V. You might want to look at some of the early ford parts suppliers to see what they have for 40's erea stuff. Quote
Plymouthy Adams Posted May 9, 2010 Report Posted May 9, 2010 oops, you did not state the "cost factor" originally..would nver have sugged RI based on that...they are expensive but figured you wanted original. As for the 6 volt modern style/coating wiring harness..none comes to mind.. Quote
BloodyKnuckles Posted May 9, 2010 Report Posted May 9, 2010 Look up and talk with Rebel Wire. They are extremely reasonable price wise. Their products are very, very good. Labeled great! I checked on a 6V kit from them a few years back. I forget what they quoted me but it was under $200 for the kit. I hope this helps. BloodyKnuckles Quote
rockable Posted May 9, 2010 Author Report Posted May 9, 2010 (edited) Thanks, BK. Here is their link. http://www.rebel-wire.com/wirekits.shtml This kit from ez2wire looks very complete. http://stores.ez2wire.com/-strse-37761/AMC-Jeep-Chevy-Chevrolet/Detail.bok Edited May 9, 2010 by rockable Quote
daddyo23 Posted May 11, 2010 Report Posted May 11, 2010 Thanks, BK. Here is their link.http://www.rebel-wire.com/wirekits.shtml This kit from ez2wire looks very complete. http://stores.ez2wire.com/-strse-37761/AMC-Jeep-Chevy-Chevrolet/Detail.bok I picked a 12v kit from them. Worked out well. Bob at Rebel is friendly and helpful. I would buy from them again. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.