lepic56

WoW! Congratulations 🎊 Cheers have cold one for me lol

the Bushing , from 1949 tech bulletins

Salut Kikobot.. Welcome to the best Forum,, Bienvenue avec nous, ici c'est plein d'infos et d'expérience que tu trouveras pas ailleurs.. Welcome with us, here it's full of information and experience that you won't find elsewhere.. Keep us posted on yours progress on your Dodge.. Tenez-nous au courant de vos progrès sur votre Dodge.

Hi Harmony I have the same problem on my 51 Dodge,, I bought a "Grease joint Rejuvenator" on amazon. did not try it yet, but sure I will try your way and maybe a mix of both ways to unclogged. One full turn out with the bushing, use to Rejuvenator, screw back-in, and do it again until it works like new.. lol Thanks for the information..

Hi Doug so that gasket is very important?? mine is missing, the choke works good , but not 100%, like it should be,, it is hard to adjust.. Thank you for the information, as I can see, they are simple to work on, but every little parts needs to be there.

Merry Christmas to you too!!

Hi Gtfastbacker this is what I bought for my 51 Dodge.. did not installed it yet. 6 volts input to 12 volts, it is adjustable just in case it's off ( too high or too low) a bit on voltage, it is chinese after all!! lol,, It's about 2" long x 1 " wide.. I don't remember the 12v amperage coming out but I'm sure it's enough to power/charge a cell phone or small transmitter..

Hahaha so funny,, When I go to a show & shine meeting,, I blackout the ''Do not'' on the sign that said, ''do not touch' so peoples can enjoy it,,

Wow!! Thank you for the list. I will read them all,,

This was I ordered this summer from Amazon , works perfect,, CTA Tools 2049 Square Head Drain Plug Sockets, 2-Piece Set Designed to Service female Square Plugs Set Includes 8-Millimeter and 10-Millimeter Sockets Applications Include: BMW, Ford, Toyota and Renault Vehicles Use with a 3/8-Inch Square Drive Heavy-Duty Construction Allows for Strength and Durability CTA Tools 2049 Square Head Drain Plug Sockets, 2-Piece Set : Amazon.ca: Automotive

hi you all. Is there a way to stop the right side hubcap to walk or move toward the tire valve and bend it???

Hi, its this time of the year again to start thinking about it,, Where the summer went.. I was readings in an article on winter storage, pretty well standard stuff, except for one thing.. To open the doors and trunk slightly, to give the rubber seals a change to relax!! What do you think on that or anyone as tried it??

Talking about the fuel gauge, it is always moving when you are down from the full mark, it move with the motion for the car and bumps.etc.. If it is normal ? will this wear out he fuel gauge mecanism after a while,,?? any maintenance with light oil to the dash fuel gauge or something like that. or is it a problem with the fuel sender?? or finally '' live it alone '' lol