Bill pilot99 Posted November 28, 2007 Report Posted November 28, 2007 Hi, Anyone have a good part # for the 218/230 10 inch disk ? And where is a good place to get one ? Thanks......Bill Escott Quote
Olddaddy Posted November 28, 2007 Report Posted November 28, 2007 I have mine rebuilt at Bay City Clutch in Tampa, FL 813-623-1416. They charge about the same as I used to pay at Napa when they had them in stock. I'm sure any major city location will have a clutch rebuilder who would do yours. Quote
Bill pilot99 Posted November 29, 2007 Author Report Posted November 29, 2007 Thanks Olddaddy, I got a quote for $125.00 plus shipping I'll give them a call. Quote
Norm's Coupe Posted November 29, 2007 Report Posted November 29, 2007 For $125 you can get a whole new rebuilt clutch, including the pressure plate from Fort Wayne Clutch, Fort Wayne, IN. They have a web site, just google it. Quote
chucky07 Posted December 18, 2007 Report Posted December 18, 2007 just called fort wayne clutch they stock nothing even close to 52 dodge 1/2 ton clutch..rebuild old only for around 200.. Quote
Young Ed Posted December 18, 2007 Report Posted December 18, 2007 There's a place here in Mpls that may stock one. Otherwise like them its rebuild the old one but I think the last one I had done was like 125. And Don C has a place he uses thats cheap too. Quote
Reg Evans Posted December 18, 2007 Report Posted December 18, 2007 I just ordered one from Andy B for I think it was around $85. Send in your old one or pay a $35 core charge. Quote
Plymouthy Adams Posted December 19, 2007 Report Posted December 19, 2007 200.00 for a clutch disc rebuilt..I think I have been out in the rain too long...or was this for the entire package, disc, pressure plate and bearing? We are tlaking rebuild... Quote
chucky07 Posted December 19, 2007 Report Posted December 19, 2007 Oh my ...my quest for a new clutch and pressure plate is quite the adventure...I just got off phone with Tennessee Clutch..they said no problem...WE have lots of 52 dodge 1/2 ton fluid drive clutches layin around....125.00 for rebuilt with pressure plate and bearing..I was like" wow great..send me one...then like 10 min later they call back...GET THIS..IM STILL LAUGHING..." YOU HAVE TO SEND YOUR OLD ONE TO US..YOU HAVE THE FLUID DRIVE AND YOUR CLUTCH IS "CORK" IT RUNS IN FLUID.....???? i'M like what? runs in fluid? hahahaha i'm laughing so hard i almost fainted..then i said.."no the clutch disc does not run in fluid...the fluid is in like a torque converter thing with a disc welded to it that the clutch pushes against.....Well after trying for like 20 min to explain this to him...I hung up..I guess nobody knows nothing about clutches anymore....... So the quest goes on...I'll make a few more calls today...Probably just gonna use my old one......need to mic it and see if it's still good i guess hahahhahah Quote
Young Ed Posted December 19, 2007 Report Posted December 19, 2007 Here's the Mpls place I mentioned. http://www.brakeplace.com/ They did my 48s and dads 63 valiant. Quote
Bill pilot99 Posted December 20, 2007 Author Report Posted December 20, 2007 Thanks for all the info. I found this last week. Carolina Clutch and Brake 430 Hwy 70 SE Hickory, NC 28602 828 327 9358 I called and if you send your disk in they will do it for ( they said ) $25.00 plus shipping. I'll send one after the first of the year and let you all know. Quote
Don Coatney Posted December 20, 2007 Report Posted December 20, 2007 Oh my ...my quest for a new clutch and pressure plate is quite the adventure...I just got off phone with Tennessee Clutch..they said no problem...WE have lots of 52 dodge 1/2 ton fluid drive clutches layin around....125.00 for rebuilt with pressure plate and bearing..I was like" wow great..send me one...then like 10 min later they call back...GET THIS..IM STILL LAUGHING..." YOU HAVE TO SEND YOUR OLD ONE TO US..YOU HAVE THE FLUID DRIVE AND YOUR CLUTCH IS "CORK" IT RUNS IN FLUID.....????i'M like what? runs in fluid? hahahaha i'm laughing so hard i almost fainted..then i said.."no the clutch disc does not run in fluid...the fluid is in like a torque converter thing with a disc welded to it that the clutch pushes against.....Well after trying for like 20 min to explain this to him...I hung up..I guess nobody knows nothing about clutches anymore....... So the quest goes on...I'll make a few more calls today...Probably just gonna use my old one......need to mic it and see if it's still good i guess hahahhahah Sorry to hear you had a bad experiance with them. I live close to them so I dropped my P-15 pressure plate off there and they rebuilt it in less than 2 hours. They supplied me with a new dics and gave me a couple of pilot bushings for around a hundred bucks. Quote
Reg Evans Posted December 21, 2007 Report Posted December 21, 2007 Thanks for all the info.I found this last week. Carolina Clutch and Brake 430 Hwy 70 SE Hickory, NC 28602 828 327 9358 I called and if you send your disk in they will do it for ( they said ) $25.00 plus shipping. I'll send one after the first of the year and let you all know. Man...that sounds like a deal. Keep us posted on the outcome. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.