rcl700 Posted March 3 Report Posted March 3 When pulling out and reinstalling plymouth flathead should I be picking up the block by the head bolts and a chain? (Back corner to opposite front corner) Quote
rcl700 Posted March 3 Author Report Posted March 3 When installing head bolts, is any sealant used? Do the head bolts enter the water jacket? Quote
Plymouthy Adams Posted March 3 Report Posted March 3 most all the bolts enter the water jacket.... Just for a laugh..............find a pair of binoculars, turn them backwards and when looking though, you will then be able to reach in with a pair of tweezers and lift the engine out, placing it in a match box for safe keeping. 2 Quote
rcl700 Posted March 9 Author Report Posted March 9 (edited) On 3/3/2024 at 5:35 PM, keithb7 said: This may offer some assistance for you: Keith, your video was very helpful. Thank you. I did as you recommend, and picked up an engine leveler. Thank you all for the guidance and information. I'm guaranteed to have a ton more questions when I try to put this car back together. 😵💫 Edited March 9 by rcl700 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.