Daniel M.Tiburcio Posted May 30, 2023 Report Posted May 30, 2023 I have a 1950 Chrysler Imperial 4dr.. I need to find out the rear end gear ratio? Quote
greg g Posted May 30, 2023 Report Posted May 30, 2023 Did you check the resource or technical areas on the Imperial Club website Quote
Solution Dodgeb4ya Posted May 31, 2023 Solution Report Posted May 31, 2023 It's a 3.54 ratio for the std. 131" WB C49 Imperial 4 dr. ...same as a 1950 NewYorker and Saratoga with the Prest-O-Matic transmission and FD. The Crown Imperial...too rare to discuss. Quote
Daniel M.Tiburcio Posted June 15, 2023 Author Report Posted June 15, 2023 Thank you guys it was barely readable on the pumpkin. Now another question? I want to change the rear-end ratio from a 3:54 to something alot higher ratio 2:76 or 2:94 thank you in advance, Daniel Quote
kencombs Posted June 15, 2023 Report Posted June 15, 2023 I don't think you will find a pumpkin tha fits the housing in a ratio that high. time to measure the old unit and go salvage shopping for a complete rear axle. What engine and trans are you running that requires such a ratio? Just curious. 1 Quote
Daniel M.Tiburcio Posted July 2, 2023 Author Report Posted July 2, 2023 350ci w/ 350 turbo, Car is completely stock in appearance thank you confirmed its 3:54 Quote
kencombs Posted July 2, 2023 Report Posted July 2, 2023 Might be easier and maybe cheaper (only if you can find used) to change the trans to an OD. Maybe a 200-4r as they are smaller and more efficient that the 400. But the 3.54 isn't bad. That was my goto ratio back when I really like brisk acceleration but needed to drive it to work too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.