Steering column and clutch pedal draft seals

[tanda62]

Anyone have this setup for the steering column and clutch pedal draft seals?  The brake pedal uses the same seal sold by DCM, Roberts and the like but I don't see any seals which would fit the steering and clutch setup I have on my 53 B4C.  It looks like there should be a seal which uses some screws to hold it in place - maybe something I am going to have to fabricate.

Thanks for any help.

[Dodgeb4ya]

I think there is a small sheet metal plate that goes above the steering column that is screwed down.

Pedal draft pad seals are as on the cars.

[Brent B3B]

11 minutes ago, Dodgeb4ya said:

I think there is a small sheet metal plate that goes above the steering column that is screwed down.

Pedal draft pad seals are as on the cars.

Visual aid 

[CO54]

I understand that draft seals are only on cars, however this could potentially work if you wanted to add them:

Wrong link in 1st post.

https://www.kaiserwillys.com/category/weatherseals/draft-seal-kits/clutch-brake-pedal-draft-seal-kit-fits-46-64-truck-station-wagon-jeepster

Edited February 22, 2019 by CO54

[tanda62]

Well guess that metal plate went the way of the Dodo at some point in the trucks life.  Fabrication it is!

 

Thanks to all for the responses!!

[JBNeal]

This may be a useful...it looks even better when covered with a floor mat

Edited March 2, 2019 by JBNeal
added link