Young Ed Posted January 9, 2019 Report Posted January 9, 2019 1 hour ago, DJ194950 said: Taking orders now? Ed ?? Maybe a special order to supply them?? ? DJ I know one of the owners at the hardware store so if they still have them I'll have no trouble getting a quantity of them. I'll check in and let everyone know. 2 Quote
Young Ed Posted February 11, 2019 Report Posted February 11, 2019 I finally made it over to the store this weekend. Got 1 as a sample. I'll hunt up some line and make sure it works as expected. The owner said it wouldn't be an issue to order a bunch of them but it would probably take 3-4 weeks between order and arrival. Quote
Young Ed Posted March 17, 2019 Report Posted March 17, 2019 Here is my test piece. Looks like these will work just fine. Only trouble I ran into was the fitting didn't want to slide back after I cranked it down but I am chalking that up to the used line being a little crusty. 2 Quote
Young Ed Posted November 26, 2019 Report Posted November 26, 2019 Got a few working on getting some more. Apparently the supplier got bought out by another so there has been a delay! Quote
JSabah Posted November 26, 2019 Report Posted November 26, 2019 I could use one as I seemed to have lost my old line. How do I go about getting a set? Quote
desoto1939 Posted November 26, 2019 Report Posted November 26, 2019 young ED I sent you a PM regarding the brass connectors. I also am interested or can you supply the name of the store were you got them and the part number and then I could contact them directly. Rich Hartung desoto1939@aol.com Quote
Young Ed Posted November 26, 2019 Report Posted November 26, 2019 (edited) I got them at my local hardware store out of their bulk bins. There is no packaging. There might be a stock # I'll have to check on that. Edited November 26, 2019 by Young Ed Quote
desoto1939 Posted November 26, 2019 Report Posted November 26, 2019 39 minutes ago, Young Ed said: I got them at my local hardware store out of their bulk bins. There is no packaging. There might be a stock # I'll have to check on that. ED thanks for your replay on PM. Rich Hartung desoto1939@aol.com Quote
Pete Posted November 27, 2019 Report Posted November 27, 2019 I got mine at McMaster Carr. Single unit quantities. I'm afraid I no longer have the part number. Quote
JBNeal Posted December 1, 2019 Report Posted December 1, 2019 (edited) this fitting looks close enough that I'll get a few shipped to the house to try out... https://www.mcmaster.com/50815k103 Edited May 12, 2022 by JBNeal additional information Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.