FlashBuddy Posted January 13, 2018 Report Posted January 13, 2018 Decided to at least clean up the floorboards after having replaced the speedometer cable. I've got them unbolted and they flex and almost separate but they seem stuck. What am I missing? Refering to #'s 1 and 2 in my photo. Quote
ggdad1951 Posted January 13, 2018 Report Posted January 13, 2018 Are you sure you got all the bolts? Those two once the bolts are out should come straight out with no problem. Quote
NiftyFifty Posted January 14, 2018 Report Posted January 14, 2018 I might be blanking, but that doesn't really look like the way the panels are laid out...but it has been awhile...take every bolt you can find out, they are lipped to cover each other up, so you somewhat have to loosen everything up to remove....possibly someone glued/silicones them to stop raddles....just keep lightly prying Quote
FlashBuddy Posted January 14, 2018 Author Report Posted January 14, 2018 Thanks, I can certainly give that a go. I can see a couple of screw or bolts holding the dimmer switch, but other than that it's all unbolted. I will take out the dimmer switch and start gently prying away Quote
NiftyFifty Posted January 14, 2018 Report Posted January 14, 2018 Ya those bolts shouldn’t matter...be gentle with that switch, that bakalite is pretty fragile. Good luck Quote
48Dodger Posted January 14, 2018 Report Posted January 14, 2018 What you may haved miss is the lower side of the foot board has a "pocket" that goes from side to side. It slips onto the cab floorboard. You may need to tap it free from underneth or soak it from the inside floor seam to get it loose. I did a video that shows it for a second or two....maybe you'll see it. 48D Estrada MotorSports 1948-53 Dodge Trucks: Throttle return spring Quote
tanda62 Posted January 14, 2018 Report Posted January 14, 2018 Here is a picture of the two panels. Hopefully this will show you all the bolt locations and help you locate them for removal. 1 Quote
Blue Posted January 14, 2018 Report Posted January 14, 2018 2 hours ago, tanda62 said: Here is a picture of the two panels. Hopefully this will show you all the bolt locations and help you locate them for removal. Thanks for the picture. this answered a question for me as well. P/O performed some unique fabrication I can repair now. Quote
FlashBuddy Posted January 14, 2018 Author Report Posted January 14, 2018 10 hours ago, 48Dodger said: What you may haved miss is the lower side of the foot board has a "pocket" that goes from side to side. It slips onto the cab floorboard. You may need to tap it free from underneth or soak it from the inside floor seam to get it loose. I did a video that shows it for a second or two....maybe you'll see it. 48D Estrada MotorSports 1948-53 Dodge Trucks: Throttle return spring That has got to be it. Feels "sprung" when I pull on it. Great video, as they all are, though I get dizzy watching 'em. My gamer son says the nausea goes away after repeated exposure Got to get 'em out, get 'em POR painted and get 'em back in so I can go for a drive. Quote
NiftyFifty Posted January 14, 2018 Report Posted January 14, 2018 Do yourself a big favour and put some dense foam weatherstripping between then before re-install...saves a lot of noise issues 1 Quote
MBF Posted January 15, 2018 Report Posted January 15, 2018 I used rubber strips similar to the thickness of an old inner tube in between any of the lips where two pieces contact each other. It won't hold moisture, and probably quieted down some of the noises that would have been made. 1 Quote
48Dodger Posted January 16, 2018 Report Posted January 16, 2018 Just a few more pictures to show the "pocket" or "channel" that attaches the foot board to the cab. 48D 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.