floor panesl and rocker panels for 1940 dodge coupe

[comedtech63]

my 1940 dodge business coupe is need of floor pans and rocker panels

my question is has anyone ever used the Plymouth Doctor or can some one recommend someone else

thanks

[40phil41]

12 hours ago, comedtech63 said:

my 1940 dodge business coupe is need of floor pans and rocker panels

my question is has anyone ever used the Plymouth Doctor or can some one recommend someone else

thanks

Do a search in the off topic section and you will find lots of opinions.

Phil

[kridgleyud]

I had good luck with classic 2 current fabrication on the toe board.

[LazyK]

classicparts4u

http://stores.ebay.com/classicparts4u/DODGE-BODY-PANELS-/_i.html?_fsub=2433466011

[Plymouthy Adams]

as a word of caution...not all metal benders are equal....of the three names mentioned, I have experience with two....the original rockers were stamped and todays are bent on a brake...watch carefully in outer rockers....if your body has a curve along the lower edge...some do not put that curve into their panel......not a big deal if you have shrinker/stretcher tools...easy to check your needs with a straight edge...