ThriftyT Posted July 24, 2017 Report Share Posted July 24, 2017 I am waiting the arrival of a really nice '40 Chrysler Windsor Coupe. From what I can find out it has the original 241?.... I'm having a heck of a time figuring out if it's a 23" or 25" block. One of the few small changes I'd like to do is split the exhaust, and I'd like to order the manifolds. If someone could help me I'd sure appreciate it. Thanks in advance fellas Quote Link to comment Share on other sites More sharing options...
greg g Posted July 24, 2017 Report Share Posted July 24, 2017 Engines in these cars were frequently swapped instead of being rebuilt. I would wait to verify either by measurement or engine number before ordering parts. 1 Quote Link to comment Share on other sites More sharing options...
ThriftyT Posted July 24, 2017 Author Report Share Posted July 24, 2017 Good call. I've been told by the trustworthy fellow it's original. I'd still like to figure this out just for my knowledge yet. Thanks Quote Link to comment Share on other sites More sharing options...
Andydodge Posted July 24, 2017 Report Share Posted July 24, 2017 The 23" engines never got over 230 cubes, the 1940 Chrysler supposedly had only the 25" 241 cube six cylinder engine plus the straight eight.........but Gregs right, I'd wait till you physically see it in person with a tape measure in hand...........btw welcome aboard.........regards from sunny Sth Grafton NSW, Australia Quote Link to comment Share on other sites More sharing options...
ThriftyT Posted July 24, 2017 Author Report Share Posted July 24, 2017 Awesome thanks. So that's essentially the same as a spitfire.... correct? Quote Link to comment Share on other sites More sharing options...
Ricky Luke Posted July 24, 2017 Report Share Posted July 24, 2017 (edited) Welcome Thrifty. I've got an Australian bodied 1940 Chrysler sedan. Spitfire less the spiffy head casting. If it's original, the engine number will start with C25. Cheers Rick Edited July 24, 2017 by Ricky Luke Quote Link to comment Share on other sites More sharing options...
1949 Wraith Posted July 24, 2017 Report Share Posted July 24, 2017 Welcome Thrifty. I have the 241 in my '41 Windsor club coupe, a great engine. I did put a split exhaust on my long bock 218 in my 1938 Dodge and it really helps the engine breathe. The '41 is basically original, so the exhaust is stock on it. Quote Link to comment Share on other sites More sharing options...
dpollo Posted July 24, 2017 Report Share Posted July 24, 2017 Your engine started out with a 3 3/8 bore and a 4 1/2 inch stroke. It is a 241 but not to be confused with the 241 used in 35 6 &7 . The Spitfire, with or without the logo on the head has a 3 7/16 bore for 251 cubic inches. Bore yours .060 over and you will have 3 7/16 Quote Link to comment Share on other sites More sharing options...
normanpitkin Posted July 24, 2017 Report Share Posted July 24, 2017 My 1941 now has a triple carb set up . and headers running into a twin large bore system. Its probably the identical motor to yours. Quote Link to comment Share on other sites More sharing options...
ThriftyT Posted July 24, 2017 Author Report Share Posted July 24, 2017 Thanks guys. What brands of manifolds did you all use? Any of you have Overdrive? Quote Link to comment Share on other sites More sharing options...
dpollo Posted July 25, 2017 Report Share Posted July 25, 2017 Overdrive is a great option.. The R10..... 52 to 56 would be my choice. 30 % speed reduction, a bolt in and nice driveability , kick down etc. although the one originally used in a 40 Chrysler will do the job too. Quote Link to comment Share on other sites More sharing options...
1949 Wraith Posted July 25, 2017 Report Share Posted July 25, 2017 13 hours ago, ThriftyT said: Thanks guys. What brands of manifolds did you all use? Any of you have Overdrive? I had the stock manifold split and modified to a dual outlet manifold. My '41 has the vacamatic semiautomatic transmission and came standard with 3.54 rear gears which are fine for the speeds I drive the car. Quote Link to comment Share on other sites More sharing options...
Reg Evans Posted July 25, 2017 Report Share Posted July 25, 2017 These are going on my '39 Chrysler with OD. Purchased from Langdon's Stovebolt. https://www.ecwid.com/store/catalog/#!/Exhaust-Headers/c/18665942/offset=0&sort=normal Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.