400mphpc Posted August 23, 2016 Report Posted August 23, 2016 Need some suggestions. While in the process of putting in new heat/sound pad and new carpet, I broke my gas pedal off the floor mount. The metal brace that the rubber pedal bolts too, snapped off. Where the heck do I get one of these? I can tell that over time the front bolt was also stripped, so it was not getting the total support it required. I'll upload a pic as soon as I can get the size reduced. Quote
400mphpc Posted August 23, 2016 Author Report Posted August 23, 2016 Photo of the backside of the pedal and the floor mount Quote
Plymouthy Adams Posted August 23, 2016 Report Posted August 23, 2016 try e-bay......it works... Quote
400mphpc Posted August 23, 2016 Author Report Posted August 23, 2016 No luck on eBay or the web. What do you call the part that I broke? Accelerator bracket? Or Mounting plate? Maybe I'm calling it the wrong thing in my web search. Do any of you know if this was cast iron or aluminum? It almost looks aluminum but find that a bit odd for the year (1950) Quote
Jerry Roberts Posted August 23, 2016 Report Posted August 23, 2016 Got a magnet ? It won't stick to aluminum . Quote
ptwothree Posted August 23, 2016 Report Posted August 23, 2016 Mine broke in exactly the same place. Clean it up real good and use some JB weld and a small clamp to stick it together. Quote
Plymouthy Adams Posted August 23, 2016 Report Posted August 23, 2016 two pedals on e-bay when I posted above.. Quote
greg g Posted August 23, 2016 Report Posted August 23, 2016 how about drilling another hole and putting a smaller nut and bolt through the pedal and the metal piece? Quote
400mphpc Posted August 24, 2016 Author Report Posted August 24, 2016 Thanks for the suggestions gents. I'll continue my quest to find one and try the JB Weld for a short term solution. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.