Need help finding some bolts/screws

[casper50]

Anyone know anyone that carries the door hinge screws and front fender to body studs, nuts and washers?

[48ply1stcar]

My go to is Restoration Specialties http://www.restorationspecialties.com/

 

Although, they should be available from a good independent hardware store.

[Bingster]

That washer that looks like a flower is almost impossible to come by. I could use a couple of dozen myself.  But as they usually will never be seen, any similar weight washer will do.

[wayfarer]

Try McMaster-Carr or MSC

 

http://www.mscdirect.com/

 

http://www.mcmaster.com/#

[Dodgeb4ya]

Same stud and washers used on 1941-48 DeSoto cars.

Edited March 15, 2016 by Dodgeb4ya

[casper50]

found some. https://www.wclco.com/lock-washers/toothed-lock-washers/  the photo for toothed lock washers on the right is an exact match but the photo when you click on that section isn't an exact match but it's real close.  at WCL #  DMTP-0375-22-01  

Edited March 15, 2016 by casper50

[DJ194950]

Mc master washers?

 

http://www.mcmaster.com/#star-washers/=11jz7q2

[casper50]

MC has no domed washers.  No reply back from WLC yet.

Edited March 16, 2016 by casper50

[JSabah]

DMP has it for sure... In either stainless or chrome

http://dmpfasteners.com/shop/hardware-fasteners-1824/washers-92/external-countersunk-ss-161/

http://dmpfasteners.com/shop/hardware-fasteners-1824/bolts-screws-76/oval-machine-chrome-1616/

I'm not sure of the size studs that you need, but I'm willing to bet they will have it too

http://dmpfasteners.com/shop/1-4-28-x-1-stud-grd-8-10512

Best thing is to call them as they are very knowledgeable (they told me about types of hardware I didn't even know existed)

PS no affiliation

[casper50]

I've found the door screws and studs locally.  Need the domed washer now.

[Bingster]

I looked at the wclco site and that washer in Casper50's right-hand photo above is about as close as you're gonna get if it comes in the same size. I'm gonna contact them and see. Maybe they'll send a sample.

[casper50]

Bingster I emailed them yesterday no answer back yet.  If you make contact please let me know.  Thanks.

This is on the next page when you click on photos above on their site.

 

3/8 0.384 0.398 1.365 1.385 0.062 21.73 DMTP-0375-22-01

4620-22-01

 

 

This is the closest size wise that I've found.

Edited March 16, 2016 by casper50

[Bingster]

Could you send them your photo of the washer along with a diameter and see what they say?  I believe they are a supplier of quantity and maybe don't want to deal in piecemeal sales. If so, maybe we could go in together on a larger quantity.

[DJ194950]

Do they look like these from McMaster-Carr? They had the counter sunk machine bolts on a different page.

 

http://images2.mcmaster.com/mvA/contents/gfx/large/90900a030p1-b01l.png?ver=1406105752

 

If not I missed the question/search somewhere.

 

Oh well! LOL.

 

DJ

[casper50]

no.  they look like the photo on the right in #6 on this thread.   My local bolt and supply is going to try and order some since I found the place that has them but only sells wholesale.  They said that I might have to buy a whole box, so if anyone needs some let me know.

Edited March 16, 2016 by casper50

[JSabah]

You should have a look at the DMP Fasteners links that I posted.....

Edited March 17, 2016 by JSabah

[casper50]

I did and didn't see anything like that domed washer that goes on the stud

[JSabah]

Ah, sorry, I was stuck on the other pic

[casper50]

WCL emailed me and told me that Fastenal either will carry these or can order.  My local Fastenal doesn't carry them but has ordered them for me.  $5.00 for 20 + shipping.   If they look like the photo they are extremely close to the originals.  Here's the number that Fastenal found them under:   DMTP-0375-22-01

 

 

Update.  No Fastenal store carries them.  It's a minimum order of 200.  $50 + shipping.  Don't mind ordering them but no way I'd use more than 12.  Anyone else need any?

Edited March 17, 2016 by casper50

[Bingster]

I'd be very interested to see those.  What diameter did you get?

[casper50]

Hole Dia. Min.            Hole Dia. Max          . Outside Dia. Min.                 Outside Dia. Max.                     Thickness  

0.384                           0.398                            1.365                                     1.385                                     0.062

Edited March 17, 2016 by casper50

[wayfarer]

WCL emailed me and told me that Fastenal either will carry these or can order.  My local Fastenal doesn't carry them but has ordered them for me.  $5.00 for 20 + shipping.   If they look like the photo they are extremely close to the originals.  Here's the number that Fastenal found them under:   DMTP-0375-22-01

 

 

Update.  No Fastenal store carries them.  It's a minimum order of 200.  $50 + shipping.  Don't mind ordering them but no way I'd use more than 12.  Anyone else need any?

I'd call/email other vendors and give them the Fastenal number and see if they can provide them. Nothing like a little friendly competition...

[Bingster]

What did that stud come off of?  I have some smaller ones that attach the front grille on my '47 Desoto but I have six large ones that I don't know what they came off of. Let us know when you get those washers you ordered.

[casper50]

studs are for the rear of the front fenders.  I cannot get the washers unless I order 200.  $50.  No problem doing that but I don't want to sit on a bunch of special washers that I will never use again.

[Bingster]

I was in my local Fastenal today and the gal there took every bolt and washer that I came in with and walked around and found every one. Those that she didn't have she ordered.  All the bolts were in packages of five or ten or whatever you wanted.  She also ordered me those domed washers pictured above, both the non-periphery and the toothed periphery.  I told her I got a source from this site and I sent her in the info.

 

She matched all the bolts from my '47 Desoto exactly.  I didn't even know I had a Fastenal near me.