Jump to content

John U

Members
 View Profile  See their activity

  • Posts

    72

  • Joined

  • Last visited

 Content Type 

Everything posted by John U

  1. John U
    I'm running stock 51 wipers with 12-6 volt reducer on mine for years its still working for the few times I use it.
  2. John U
    I put a GM rack on my 51 Dodge pu sraight axle 20 years ago you have to run a slip joint on the steering shaft or you would get the column in your chest my rack is mounted to the axle so it moves up and down so something has to absorb the movement, mine has worked fine all these years i just add a little WD40 on the slip joint .
  3. John U
    It was what you licensed for on your plate
  4. John U
    I haven't had the spring mounts on mine for almost 20 years never had any problems mine is a 116 inch wheel base
  5. John U
    looks alot like the ones I have in my 51 mine have been in for 18 years working fine either one should work price looks about what I paid for mine
  6. John U
    I have a Rusty Hope setup on my 51 3/4 ton for years it fit fine everything went right on no problem!
  7. John U
    I tried that with mine when it was stock and had the same problem but I found that the Electric would not work because there's a check valve at the mechanical pump that won't let it thru
  8. John U
    new bits work so much better I fought on side got a new sharp bit for the other side was like butter
  9. John U
    I have a GM rack on my 51 B3C for well over 15 years it works fine I have the pressure turned down so its not so touchy
  10. John U
    looking good Mark I'm glad someone has ambition I hope your eye is better at this rate you will be done in no time
  11. John U
    looks really good Mark
  12. John U
    to late now but I used the two screws for the wipers on mine
  13. John U
    I used 5 in Dolphin gauges I believe there for a 50 Chevy PU 2 piece set one goes in the speedo hole the other in the speaker hole fit nice.
  14. John U
    looking good your getting there
  15. John U
    Bobs Classic Glass has them in clear green or smoked tint 200.00 a pair
  16. John U
    I have a 80s Pontiac 6000 rack in my 51 at least 10 plus years and its worked great ever since
  17. John U
    I got mine from Roberts
  18. John U
    sorry my truck is tucked away in hibernation till spring
  19. John U
    I have the Rustyhope kit on my truck I drilled mine on the truck just use a sharp bit. I have a Master Power Brakes booster and dual MC setup for a Model A, very little fab work,its been working great for 10 plus years
  20. John U
    I think you can make that time line Ed put him to work
  21. John U
    I have he's kit on my 51b3 for at least 10year's no problems went on pretty easily more than happy
  22. John U
    Mine had the same one on the left side same arm on the right little different mount but real close mine is a 51 b-3-c
  23. John U
    I know a bee fits just fine it landed on my shoe and started walking up my leg had to stop and stomp my foot to get it to leave
  24. John U
    I went and looked I was wrong its on the back side sorry
  25. John U
    I have it on my51 works great I think its on the spindle side because it's machined it's been on my truck 10-12 years no problems
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use