Jump to content

Conn47D24

Members
 View Profile  See their activity

  • Posts

    776

  • Joined

  • Last visited

  • Days Won

    10

 Content Type 

Everything posted by Conn47D24

  1. Conn47D24
    Absolutely stunning!
  2. Conn47D24
    I had to break the original mirror to get it out and see the mechanism. Friend with a glass business cut a new mirror for me.
  3. Conn47D24
    Another side project. The only way to rechrome this used unit I found was to take it apart. Took a big chance I had no idea what was underneath the mirror. Small Spring and a screw which I had to retap new threads. Used a blue thread locker and then epoxied a new mirror. This is the driver's side which was really beat. I have a NOS for the passenger side.
  4. Conn47D24
    Eaton Springs had new for my 47 Dodge Coupe FYI. Easy to work with over the email and phone.
  5. Conn47D24
    Windshield frame, and rear view mirror complete. Straight piece of wire helped find the hole for attaching screws
  6. Conn47D24
    Marc, there are three different adjustments. I followed the service manual on these and got it lined up. Do you have a manual?
  7. Conn47D24
    Thanks, Slow going past few months. Waiting on an upholstery shop to do the door and rear panels. Will be VERY close after that is done.
  8. Conn47D24
    My original antenna needed some TLC, and was a real bear to install. Had to remove center floor panel to get the angle right, and still had to bend it more than I was comfortable but it did not break. The exterior bezzle made of plastic was cracked repaired it with bondo , it came out OK Metro still makes the correct replacement gasket.
  9. Conn47D24
    Casper50 Did you ever get the antenna installed? I have the same issue with my D24
  10. Conn47D24
    Title_1.mp4 Good news Marc, My first start video here shows my wiring. Remote starter button was only add on. No dash or gauges in at that point .
  11. Conn47D24

    Motivation

    Conn47D24 replied to DJK's topic in P15-D24 Forum

    I've tried to do one thing, no matter how small each day. Sometimes it's just cleaning or painting a small part for future install.
  12. Conn47D24
    Hello all. Another 40 year memory lapse. I have no recall on how I removed the cowl mounted antenna. I'm guessing I need to remove the center floor panel to lower the antenna and angle it into the cowl. Any experience and advice on thus please ?
  13. Conn47D24
    Allbizz49, Your wiper arms have this same hook ?
  14. Conn47D24
    This is the wiper arm from my D24. See the blade end connection type. What blade will fit this ? Is there an adapter required? Thanks all in advance
  15. Conn47D24
    Special tool for guides, or an air hammer tool.
  16. Conn47D24

    Parts !

    Conn47D24 replied to Conn47D24's topic in P15-D24 Forum

    Sniper, yes, the jack and tools would be great to have. Many borrowed or left on the side of the road after a flat.
  17. Conn47D24

    Parts !

    Conn47D24 replied to Conn47D24's topic in P15-D24 Forum

    PA, I also have the retainer and bolt that secure the spare. They are under this cover. This , according to the parts book, is the spare wheel cover. Listed under the hub cap section. I tried an old dDodge dog dish cap but it will not fit over the retainer. That lead me to the parts book, and my find. Seems like a part that was easily lost over the years.
  18. Conn47D24

    Parts !

    Conn47D24 posted a topic in P15-D24 Forum

    After all these years I'm still seeing things in the parts book that I don't need ... but I just gotta have. NOS Spare wheel cover. Part # still visible. Who knew? Anybody seen / have one of these?
  19. Conn47D24
    Windshield Wiper replacement Charts and Instructions View File These charts were in several NOS wiper Arm / Blade boxes. MOPAR and ANCO Hope they come in handy as there were for me. Clayt Submitter Conn47D24 Submitted 02/07/2022 Category Instructions, Manuals & Templates  
  20. Conn47D24

    Version 1.0.0

    29 downloads

    These charts were in several NOS wiper Arm / Blade boxes. MOPAR and ANCO Hope they come in handy as there were for me. Clayt
  21. Conn47D24
    Too much paint seen here before I did it over.
  22. Conn47D24
    Marc, I learned the hard way NOT to paint the small section of the shift rod that has to slide through the soft fabric bushings. So stuff I had to remove again and sand off the paint in a few inches. FYI
  23. Conn47D24
    Mark, Looks like you had this correct gasket on there. Maybe over filled ?? I recall that hole being odd, I think it's only purpose was for assembly.
  24. Conn47D24
    Enjoy your Holiday fellow gear heads ! Merry Christmas
  25. Conn47D24
    Take your handbrake cable to a local wire rope/ cable shop. They can restore it with new wire cable.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use