Jump to content

Longest Drive to Date - Rounding out the Home Stretch


Recommended Posts

Posted

Hi all,  HOT day in Connecticut.   Morning, and already 80's

 

So I took about a 30 mile trip, mostly primary roads, 35-40 MPH avg.  First time at 50... speedy !

 

Observations and a question.

 

VERY pleased that the Temp read a steady 180' while moving,  long idles 200 ish, then back down again to 180.

 

Amp gauge finally registering as I just had the generator checked out and a broken wire repaired. ( more on that later )

 

OIL,  running at 40 lbs, idle at lights 20ish.    Now till this long trip I've been in the garage or around the block, few miles at best these past few years while working on the car.

 

It's been 40-60 lbs oil pressure till this long trip.

 

QUESTION, is this my oil relief valve kicking in and filtering the oil ??

 

 

Also, at the hottest,  and furthest point I stopped for about 15 minutes, and again pleased it started right up. 

 

I installed a heat shield under the carb bowl and it seemed to help with past re-start issue.

 

 

 

20230621_144025.jpg

20230621_144033.jpg

  • Like 2
Posted
22 minutes ago, Conn47D24 said:

QUESTION, is this my oil relief valve kicking in and filtering the oil ??

Do you have the oil filter cannister that you can change out the filter only? Pull the top and see if oil is in the filter area. If it is then yes your oil is being filtered. If not then check the relief spring for debris or a broken spring.  I know mine works form changing the oil and not seating the gasket correctly in the lid. Oil all over that side of the engine.

 

Joe Lee

Posted

I just changed the oil and filter.  Filled the canister up aroud the filter with oil. New lid gasket too.

 

The canister does get hot to touch as the manual suggests checking.

 

Does the oil pressure drop when the valve opens ?

Posted (edited)

My manual says 60 psi is max, 4o to 45 is a good neighborhood for normal operating  conditions.  The dip to 20 at idle is not a concern.  Since you prefilled the filter, make sure you are not over filled. My dad ran his flathead Dodges at the add mark.  Said it lessened leakage.

Edited by greg g
  • Thanks 1
  • Haha 1
Posted (edited)

My 48 Plymouth 218 23inch oil pressure is 40lbs running off 12v starter. If your car is 6v starter turns shower . Oil relief valve keep oil psi around the 40-45 psi range oil thickness I don't thank should make a difference oil pressure and the valve just opens more or less off the pressure . Maybe broken spring or dirt in valve. I think I have seen kits for these valves I don't remember who or ware try Andy b oldmopar  

Screenshot_20230709-152236.png

Screenshot_20230709-152214.png

Edited by Karey
More info
  • Thanks 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use